Csf20ebu Parts

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more

• Door sweating
• Door won't open or close

I determined that the cam riser had broken into two pieces. Finding the part was easy on the diagram on the website. It arrived less than 24 hours after it was ordered. Top hinge was removed and the door was placed on a set of horses. One bolt was removed from the bottom of the door, the pieces of the broken cam riser were removed and the new one installed. Door was replaced and top hinge rebolted. The door was off for about 5 minutes. I was very pleased with the service of Appliance Parts... Read more

Ordered the part through e-mail based on the model number of the frig. When the part arrived,I looked at the set up from the right side and follwed the process for the right. Took me one minute. Read more

• Noisy

I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the... Read more

• Freezer not defrosting
• Freezer section too warm
• Fridge too warm

Ordered a ge thermostat part . Took everything out of freezer , unscrewed panel and took the plate out. Used a hair dryer to defrost ice. Took out old part and installed new part. Everything is working just fine!!! Used a meter to test old/bad part and indeed it was dead. Read more

Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more

This unit has a recurring problem with the defrost timer. after the first 10 years the original part gave up. we had it replaced and (as normal for me i watched very closely) . after 2 years the same trouble started again. the defrost cycle would run to long. so i replaced the same part and solved the trouble again. so now about every 2 years this part wears out again and i order it and replace it. this has gone on for 20 years now and this unit is still going strong after serving us for 29... Read more

Ordered the cord through appliance parts pros, with additional screws and it works! Yay after waiting months and everywhere was out. Thank you. Read more

Ordered Parts Online after a Month . Appliance Research by MySelf -Ordered Parts Read more

• Freezer section too warm
• Fridge too warm
• Noisy

I removed the lower back panel,I disconnected the two wire plug and removed three mounting screws and removed the motor.Then I removed the threaded fan nut and installed the fan on the new motor.Installed the three mounting screw to the bracket and reinstalled the plug.Replaced the lower panel,runs like new Read more