Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Broken door latch preventing your washer from starting? This door latch secures and locks the door during cycles. DIY repair takes under 10 minutes.
Unscrewed door latch and replaced it with the new door latch (1-2 min). Unscrewed outer plate from door lock assembly. Removed door lock assembly from its outer plate and unplugged wiring. Replaced with new door lock assembly, plugged back in, tightened some screws, double-checked alignment between latch & lock assembly was good and the project was done. Incredibly easy and saved about $150 not having a repair tech come out to fix it. Read more
Washer door won't lock or stay closed? This door lock secures your front-load washer during cycles. DIY repair takes 5-10 minutes with basic tools.
Replaced it. Read more
The Water Valve is an OEM part for Frigidaire washing machines. This part controls the entry of water into the washer during the wash and rinse cycles.
Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.
Symptoms of a bad washer water valve include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
New water valve. Read more
Secures hoses and boots to pumps and tubs, preventing leaks. Replace if damaged, rusted, or unable to tighten. Confirm fit with your model number.
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more
Fix detergent not dispensing properly with this washer dispenser drawer assembly. Holds detergent and fabric softener for automatic dosing during cycles.
Replaced the broken cover and drawer. Read more
Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.
With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more
This replacement spring restores the correct tension in the affected mechanism on your appliance, helping parts return smoothly and stay aligned. A fatigued or broken spring can cause loose action, noise, or improper engagement—this fixes it fast. What it does
Flexible plastic tubing that recirculates water inside the washer drum during wash cycles. Replace if cracked, split, leaking, or showing wear.
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts. Read more
The Detergent Dispenser Handle Assembly is an OEM component for Frigidaire front-loading washing machines. As the user access point to the detergent drawer, this assembly incorporates the pull tab handle and internal latching mechanisms.
Causes of failure could include broken or cracked plastic components from repeated opening and closing of the drawer over time, as well as worn gears and rollers failing to securely close and latch the drawer. Mineral buildup may also cause jams or obstructed motion.
Symptoms consist of:
This OEM Frigidaire replacement is compatible with select Frigidaire, Electrolux, Gibson, Kelvinator, and some Kenmore brand models.
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more
Replacement shock absorber for front-load washers. Mounts between drum and base to dampen vibration. Replace if cracked, leaking, or worn out.
Checked out a YouTube video on how to fix the two issues I had. Ordered the parts from AppliancePartsPros.com with overnight shipping and had the parts replaced in less than 30 minutes from start to finish the next day. Read more
Seals washer tub halves to prevent leaks between drum sections. Replace if leaking onto floor or between shell halves. Confirm fit with model number.
Took the machine apart and found 2 leaks. Drum was leaking and a hose had a hole in it . Read more
Shock absorber for front-load washers. Reduces vibration and absorbs movement during cycles. Replace if worn, damaged, or causing excessive shaking.
I replaced all shock absorbers with new ones. Read more
Plastic baffle (vane) that attaches inside the washer drum to lift and tumble clothes during wash cycles. Replace if cracked, broken, or detached.
Washer not spinning or draining properly? A worn drive belt often causes poor spin performance. This belt connects motor to drum. 30-minute DIY repair.