Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Heating Element is an OEM replacement part for Bosch electric wall ovens and ranges. It is responsible for providing precise heat control to oven cavities and cooking elements.
Symptoms of an inadequate heating element include:
Causes can be normal wear and tear after extended use. Exposure to splatters or residue over time may also reduce heating performance.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore wall ovens.
Based on the sound of arcing, one of the elements failed. The upper one tested fine; too bad, as that's the easy one to access. The lower element on my Bosch induction range is accessible from the back, but only after you pry and bend a vertical piece of sheet metal down to a 30-40 degree angle. I assume this saves Bosch a few cents on each unit during production. Before bending that panel down, I remove all vertical obstructions: 240V power cable, the wires to the warming drawer element... Read more
Fix oven overheating or temperature regulation issues with this temperature sensor. Common repair for wall ovens and ranges that won't heat accurately.
Some internet searching on the problem followed by a chat session with AppliancePartsPros and a decision to purchase both control panel board and probe (didn't want to remove the unit twice). The replacements arrived within 36 hours and my daughter (50 years) helped remove the oven plus replace both parts - the panel was above the oven chambers and easy to replace. And the probe was okay too. I'm in my mid 70s. The panel required the nylon spacers to be re-used and these took half an hour to... Read more
Fix a blank, flickering, or unresponsive oven display. This electronic control module restores touchpad function and temperature settings. DIY-friendly repair.
The digital display/control touch screen stopped lighting up. I discovered it still worked (very faint beeps when pressing buttons, but literally flying in the dark (screen). This was the second screen that went black in a little over two years time. Did a google search and placed the replacement order with AppliancePartsPros.com. It arrived a few days later. It took me longer to get the tools together than to swap out the display panel. An easy Google search will get you an easy todo video... Read more
Oven light bulb illuminates the cavity for monitoring food without opening the door. Replace when burned out or flickering. Verify fit with your model.
Replacement slide for warming drawer. Sold individually. Replaces broken, stuck, or worn slides that prevent proper drawer operation or closing.
Replaced glide Read more
This shelf restores a level, secure storage surface inside your refrigerator. Replacing a broken or missing shelf helps keep items organized and maximizes usable space for everyday food storage. What it does:
We just wanted an add on, it came fast and works great. Thank you Read more
The Heating Element Oven is an OEM part compatible with Frigidaire and Electrolux wall ovens and ranges. It generates targeted heat through accurate temperature coils to provide consistent, reliable baking and broiling. The oven element ensures warm, golden finishes for any recipe.
Causes of a damaged element include mineral buildup impeding heat transfer. Physical bending or cracking of fragile coils can occur from accidental impact over years of use.
Symptoms of a failed element are:
Replacing with this genuine OEM part restores optimal performance. Compatible with Kenmore, Gibson, and some Admiral wall ovens.
Protects the oven light bulb and illuminates the cooking chamber. Replace if cracked, discolored, or broken. Confirm fit with your model number.
Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner. Read more
This pushbutton switch controls power to the appliance circuit. When pressed, it opens or closes the electrical path to turn the function on or off, restoring reliable button response and consistent operation.
It took about 30 minutes (including the time it took to clean up the junk that had accumulated over the months under the range floor). Easy to do. Just removed about 12-odd screws in order to remove the cosmetic plates/covers the covers, etc., to access the unit, took off one wire at a time from the old unit and connected it to the new unit, then put everything back. Required both Phillips head screwdriver and star bits (for 4 of the screws). Read more
The Outer Door Panel is an OEM part for Bosch range doors. Crafted from durable stainless steel, it protects the inner workings of the oven door while providing an elegant and smooth surface for users.
Symptoms of a bad outer door panel include:
Causes of failure may include normal wear and tear over time from daily use or accidental impacts and dents. Exposure to heat could cause warping.
Replacing this genuine Bosch OEM part restores the pristine look and feel of the oven door. Compatible with 300 series gas and electric range models, it ensures safe and reliable performance. This replacement panel is also compatible with Thermador and Gaggenau ranges.
With new replacement parts Read more
Cracked or stained cooktop glass? This range surface restores safe cooking and easy cleaning. Replace dented or damaged tops for proper burner fit.
Replaced with this new one. Read more
Fix burners that won't turn on or have dead spots with this electric range infinite switch. Controls cooktop burner heat from low to high power levels.
Installed a new regulator supplied by AppliancePartsPros.com. Read more
Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.
Oven overheats or shows E115 error? The temperature limiter (safety thermostat) may have failed. Moderate difficulty repair requiring careful disassembly.
Forced door open, replaced electric lock assembly and high limit temp switch . Large amount of disassembly required and patience. All working well need to check convection fan next. Read more
Oven not heating evenly or baking properly? This heating element restores consistent heat distribution. DIY-friendly repair with basic tools.
Bought a new one from Appliance Parts Pros, which came quickly and I changed it out. Works great now. Read more
This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.
A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging.
Symptoms of a defective Terminal Box may include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Removed and replace Read more