Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Torx screw secures burner assemblies, igniters, and internal components in gas cooktops and ranges. Replace rusted, stripped, or broken screws.
I have tried to remove the burner assemblies by removing the torx screws but they were badly rusted, and unfortunately they all were broken during removal. I just discarded the ruined orifices and assembled the new orifices and burner assembly. Read more
The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.
There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.
Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
Replace your broken, cracked, or missing gas cooktop burner control knob. Fits securely onto the burner valve stem for heat level adjustment and control.
My stove is probably 15 years old and when I was removing the screws that hold the burner in place on top of the stove top, both of them broke off so I had to replace the entire assembly. APP had all the parts I needed and were helpful on the phone. However when I was attempting to loosen the gas line to the burner the tubing wouldn't release from the brass nut and the tubing twisted too much. Even though it didn't appear broken I wasn't comfortable knowing the metal was surely weakened so I... Read more
Replacement mounting screw for securing panels, brackets, covers, and trim pieces in appliances. Restores fit when hardware is missing, stripped, or lost.
I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to... Read more
Fix sparking or non-working igniter switches with a new switch harness. Connects control switches to cooktop wiring. Moderate DIY repair, 1-2 hours.
I replaced the igniter module. Read more
The surface burner orifice holder is a brass or metal fitting that threads into the gas valve and holds the orifice, which is the small precisely sized opening that controls how much gas flows to a cooktop burner. Together with the orifice, it regulates flame size and ensures proper combustion. Replace this part if a burner produces an uneven, weak, or oversized flame, or if the holder is damaged, corroded, or leaking gas at the burner connection.
Ordered a replacement holder with a new ceramic igniter and installed it. The new unit would not quite fit correctly on the Metal stand. It took only a couple of minutes with a large file to remove some of the metal on each side of the metal prongs that locate the holder onto the stand. Once done, it was an easy assembly job and works just fine. Note: I ordered two of the Torx screws along with the holder and discovered this is a necessity since the old stainless screws have a barrel... Read more
Burner grate for gas cooktops. Provides a stable surface for pots and pans over the burner. Replace if warped, discolored, cracked, or worn from heat exposure.
Ordered parts from you. Got them promptly as promised Read more
This spark module generates the electrical pulses sent to the spark electrodes at each burner to ignite the gas. It is activated when a burner knob is turned to the ignite position. Replace this module if one or more burners fail to spark, spark continuously without stopping, or if you hear clicking but get no ignition.
Replaced the spark module. Read more
Fix a burner that won't ignite or has a weak flame. This burner head replacement solves low flame and ignition issues on gas cooktops and ranges.
I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out. It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits. It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and... Read more
Secures the gas orifice beneath your cooktop and routes gas to the burner head. Replace if cracked, damaged, or missing to restore proper alignment.
Replaced damaged burners and all screws using anti-seize. Also I found that a couple of the gas lines had seized in the nuts, so I replaced the lines with 1/8" copper tube and new compression fittings. Read more
LP conversion kit with 7 spud orifices for converting gas cooktop from natural gas to propane. Includes multiple orifice sizes for different burners.
Was an easy fix. Removing natural gas orifices, replacing them with propane orifices. Read more
Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.
Fix uneven flames or weak heat on your gas range with a new burner head. Restores proper gas distribution for consistent cooking temperature.
Replacement bezel that sits behind your cooktop burner knob to label settings. Replace if cracked, melted, missing, or worn from regular use.
Replace burner valve. Read more
Gas burner won't light or clicks but doesn't ignite? This electrode creates the spark to ignite gas burners. Moderate DIY repair taking about 2 hours.
Replaced the electrode for the spark ignitor on the burner. Works great now. Read more
This holder secures the gas orifice in place on your cooktop burner, ensuring proper gas flow and flame pattern. It maintains the correct positioning of the orifice for safe and efficient gas combustion. Replace it if burner flames are uneven, too high or low, or if the burner won't light properly.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.