Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.
Searched the internet and found that the culprit could be 3 different parts. Ordered them and fixed the issue by replacing the thermostat! Read more
The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.
Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.
Symptoms of a bad magnetron thermostat may include:
This OEM LG part can also be used on Kenmore/Sears appliances.
Did some Google searches and most comments concerning this issue on LG stoves indicated the high temperature thermostat malfunctions when using the self cleaning function. This malfunction causes complete loss of power for the entire stove and locks the oven door. Since I wasn't completely sure if it was the thermostat or where it was for that matter, I called a service tech to troubleshoot the stove. He was able to determine it was the thermostat and further tested his findings by... Read more
The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.
Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.
Symptoms of a bad time delay fuse include:
This OEM LG part is also compatible with Sears/Kenmore models.
Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more
Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.
It would not be fixed if not for Appliance Pro. I ordered the glass to replace and it arrived the next day. Removed old glass and put in the new. Easy! Thank you Appliace Pro!! I have already recommended you to others. Read more
The PCB Assembly is an OEM component for LG ranges. It is the circuit board responsible for controlling critical range functions such as the oven, cooking elements, and display.
Symptoms of a bad PCB assembly can include:
Causes of a bad circuit board tend to be normal wear and tear over time from heavy usage and heat exposure during cooking. Occasional power surges or fluctuations can also potentially cause circuit damage.
This OEM LG part is also compatible with Sears/Kenmore.
We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again! Read more
If your oven won't heat or takes too long to reach temperature, the bake element may be burned out. Easy 20-minute DIY repair for most LG ranges.
Pulled up you tube, watched video, ordered part, and installed. No problems Read more
Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.
Ordered replacement parts and were better than the OEM that was on the range. Read more
Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.
Tested switch with a jumper. Confirmed the switch was bad. Ordered new switch, less than a minute installation.good to go Read more
This sheath-style heater delivers controlled heat during your appliance's defrost or heating cycle. Replacing a failed element restores proper temperature performance, avoiding issues like weak/no heat, extended run times, or frost accumulation where defrost heat is applied.
I ordered the both the Pcb assembly and a heater sheath. Upon accessing the Pcb, I immediately discovered it had failed miserably, (contacts burnt and melted, wiring and insulation on one wire suffered severe electrical damage. To put it bluntly a small electrical fire had occurred on the circuit board. There was enough slack in the damaged wire so I removed the affected area, replaced the terminal. Replacing the Pcb was a snap. Disconnect the power, remove the rear cover, prior to removing... Read more
Burner won't heat or heats inconsistently? This radiant surface element mounts under the glass cooktop. DIY-friendly repair, typically 45 minutes.
It was very easy to find the part we needed, I put the model number in and it showed all the parts. Picked the broken buner, ordered it and was amazed, it came the next day. The directions were on the back of our stove. Simply followed what it said to do. Replaced burner, put it back together. Works perfectly. Wish we would of fixed it sooner. Saved having to have a service call. Read more
Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.
Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.
Removed old broken door handle per video link on AppliancePartsPro.com. Installed new handle with no issues. <10 minute job at best. Read more
Fix convection fan noise, grinding sounds, or fan failure in your electric range. This AC synchronous motor assembly restores proper airflow. DIY repair.
Secures and pivots your range door for smooth operation. Replace if door sags, rubs, or won't close evenly. Confirm fit with your model number.
A factory screw for securing specified components in your appliance. Replaces a missing or damaged fastener to restore a tight, reliable hold and help reduce vibration, rattling, and misalignment.
This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does: