Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace cracked, shattered, or broken outer door glass on your wall oven. Heat-resistant glass panel installs on oven door exterior for visibility.
This was an incredibly easy fix. Took 15 minutes max. Unscrewed the innermost door panel and removed the bracket that held the old glass in. Set the new glass in place, put the bracket back, and put the put panel/glass back and screwed it back in. Read more
The Switch is an OEM part for Whirlpool microwaves. It controls the turning on and off of power to the microwave during cooking cycles as well as detects positions within cycles to signal appropriate actuations of the microwave's magnetron, fans, and lights. The switch is a crucial electrical component that facilitates the fully automatic operation of preset cooking programs.
Causes of a bad switch can include wear and tear over time or unexpected surges that cause electrical component failure.
Symptoms of a bad switch include:
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more
Fix slow preheating or uneven baking with a new bake element. This heating component generates consistent heat throughout your oven cavity. DIY-friendly repair.
I replaced the bake element in the bottom of the unit. Read more
Halogen light bulb illuminates your microwave or oven cavity. Replace when light dims or burns out after extended use. Confirm fit with model number.
I researched on the net, ordered the part, it arrived the next day. Took about 45 minutes to replace. Fairly easy fix. Read more
Support ring sits beneath the glass turntable and allows smooth rotation during cooking. Replace if cracked, worn, or causing tray wobble or binding.
I removed the Shaft by just pulling up on it. I noticed the flat sided hole on the bottom of the Shaft was damaged and a small piece of it was missing. By using a mirror and a pair of tweezers, I was able to remove the small broken off piece of plastic from the hole in the middle of the bottom of the oven. The Shaft still would not turn the plate because of the damage. I ordered the new part and installed it, and everything now works fine. I decided to replace the Ring as well because the... Read more
This is a fixed high-limit thermostat used in ranges and ovens to monitor internal temperature and cut power to the heating element if the oven exceeds a safe operating temperature. It acts as a safety device to prevent overheating and potential fire hazards. Replace this thermostat if your oven is not heating at all, shuts off prematurely, or if you have confirmed a lack of continuity through the component with a multimeter.
Replaced the thermst-fix and the thermal fuse oven now works great Read more
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements. This part fixes the following symptoms:
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
Interior cover plate for microwave cavities. Shields wiring and components from exposure. Replace if cracked, disintegrating, or missing to prevent arcing.
Replaced the waveguide covers with the ones I ordered. Read more
Microwave turntable won't rotate or stops under load? This turntable motor restores even heating. Accessed from the bottom with basic tools.
Removed bottom cover plate and unscrewed motor housing Read more
Replace your bent, missing, or stuck oven rack with this sturdy metal shelf. Slides on side rails for adjustable height positioning inside the cavity.
Replaced old oven racks. Read more
Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more
Interior light bulb illuminates your oven cavity for monitoring cooking progress. Replace when dim or burnt out. Verify fit with your model number.
Microwave door won't open when you press the button? This release rod connects the button to the latch mechanism, restoring smooth door operation.
Fix an unresponsive oven display or controls that won't start cycles. This electronic control board manages power and executes settings in your wall oven.
Inner glass panel for oven doors. Replaces cracked, shattered, or broken heat-resistant liner inside the door window. Restores safe viewing during cooking.
Replaced tempered glass and oven seal/gasket. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.