Roper Circuit Breaker Wok Parts

Best Seller

Genuine Whirlpool part

Roper Dryer Thermal Fuse

4.9 (2227)

By: Whirlpool

Part Number: WP3392519

Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.

OEM Quality Fast 1–2 Day Shipping* Free Tech Help

Why choose this fuse?

Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
Quick delivery: over 94 % of APP orders arrive in 2 days or less.

Fixes these common dryer problems

Problem	How the fuse is involved
Dryer won’t start	Blown fuse interrupts motor circuit
No heat / not enough heat	Heater circuit disabled for safety
Cycle ends early	Over-temp trip stops cycle
Control panel dead	Power to controls interrupted

4-step DIY installation (≈10 min)

Unplug dryer and remove rear panel.
Locate thermal fuse on blower housing.
Transfer wires; secure new fuse with ¼-inch nut-driver.
Clean the vent & lint path before testing to prevent repeat failure.

*Video tutorial below.

Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on

This part fixes the following symptoms

Won't start
Timer will not advance
No heat or not enough heat
Touchpad does not respond

Do-It-Yourself Stories from Customers like You No heat Dennis G. • Kearny , NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake. Also one tool mentioned in the video... Read more

$17.95

Compare At:: $21.54
You Save:: $3.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Roper Flame Sensor

4.9 (232)

By: Whirlpool

Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

The dryer not heating or producing heat properly
Error codes related to the gas system or ignition failure
The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Shuts off too soon
No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Roper Thermal Fuse

4.9 (8)

By: Whirlpool

Part Number: WP3196548

The Thermal Fuse is an OEM replacement part for Whirlpool ovens. This safety device is designed to prevent the oven from overheating by cutting off electrical power if the internal temperature exceeds a safe level.

The thermal fuse can fail due to normal wear and tear, prolonged exposure to high temperatures, or electrical surges. Accumulation of grease and debris around the fuse can also cause it to malfunction.

Symptoms of a bad thermal fuse include:

The oven not heating up
The oven shutting off during use
No power to the oven
Error codes related to temperature control

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The oven would heat up and then it would not stay hot it would cool down Stephen O. • Loganville , GA • July 17, 2016

Replaced the blown heating element. I also only to be on the safe side, replaced the over temp sensor. I checked it with the meter when I pulled it out and it was ok. Tested ok. Thank you very much for the less than 2 day delivery on the part. Read more

$31.95

Compare At:: $38.02
You Save:: $6.07

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Roper Thermal Fuse

4.8 (20)

By: Whirlpool

Part Number: WP3399849

The Thermal Fuse is an OEM component for Whirlpool dryers. As a one-time-use safety component, the thermal fuse monitors heat levels and acts as an overload protector. This is a one-time use fuse that cannot be reset.

Causes of a bad thermal fuse include exposure to excessively high temperatures from a failure or blockage of another component like the venting system.

Symptoms of a bad thermal fuse are:

The dryer fails to heat at all
Randomly cutting out during cycles
Visible damage or melting of the fuse housing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015

Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping! Read more

$25.95

Compare At:: $30.88
You Save:: $4.93

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Roper Thermostat

4.9 (7)

By: Whirlpool

Part Number: WP3398128

The Thermostat is an OEM part for Whirlpool dryers. It plays a critical role in regulating the temperature inside the dryer by cycling the heating element on and off to maintain the desired level of heat. This ensures that clothes are dried efficiently and safely.

Common causes of a bad thermostat include electrical malfunctions, overheating, or wear and tear over time. These issues can prevent the thermostat from accurately controlling the temperature, leading to drying inefficiencies or potential safety hazards.

Symptoms of a bad Thermostat include:

The dryer not heating up
Overheating or extremely high temperatures
Clothes taking too long to dry
The dryer shutting off prematurely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015

Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping! Read more

$52.33