Wt8500dc0 Parts

Fix washer won't agitate or makes grinding noise. This pulsator assembly restores proper wash action. Moderately challenging DIY repair with video guide.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

Washer not draining or making groaning noises during drain cycle? This drain pump assembly removes water and debris. Check for clogs first; moderate DIY.

Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

This inlet valve assembly controls and directs incoming water into the appliance so cycles fill properly and water flow is regulated. It restores normal fill behavior and stops leaks when the valve is worn or stuck. What it does:

• Directs hot and cold water into the washer during fill cycles.
• Opens and closes to regulate water flow based on the control board or timer.
• Common symptom: no fill, slow fill, or continuous filling.
• Can also cause leaks at the valve or erratic water level if faulty.

• One complete inlet valve assembly.

• Disconnect power and shut off water supply before starting work.
• Depressurize water lines and drain remaining water to avoid spills.
• Typical replacement requires basic hand tools and checking hose connections and seals.
• After installation, test multiple cycles and inspect for leaks before returning appliance to regular use.

The Bellows Assembly is an OEM part for LG washers. The bellows assembly forms a watertight seal around the pump shaft to make sure water is properly drained from the washer tub during the spin cycle.

Causes of a bad drain pump bellows assembly can include split or cracked rubber from age, leaks that develop over time due to small cracks or porous areas of the bellows.

Symptoms of a bad drain pump bellows assembly include:

• Water not fully draining from the washer tub after cycles
• Excess water left in the tub requiring additional emptying
• Drips or leaks under the washer during or after draining
• Standing water or mold growth inside the pump housing

This LG part is also compatible with some Kenmore models.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This switch assembly detects whether the washer lid is open or closed and signals the control board to allow or halt the wash cycle. It is a safety component that prevents the machine from spinning with the lid open. Replace it if the washer won't start, stops mid-cycle, or doesn't respond when the lid is closed.

The Drain Pump Assembly is an OEM replacement part for LG top loading washers. It works to remove water from the washer tub at the end of each cycle.  

Causes of failure can include mineral buildup clogging the impeller over time, damaged seals allowing water into the motor coil area, or dry bearings wearing excessively from lack of lubrication.

Symptoms involve:

• Washer failing to complete drain sequences  
• Water remaining in the tub after cycles have finished
• Grinding/scraping noises from a binding impeller 

This authentic LG assembly restore is also compatible with select Kenmore-branded models.

Small flat hardware washer that sits under screws or bolts on washer assemblies. Distributes load and protects surfaces. Replace if missing or worn.

Genuine drain hose assembly that routes wastewater to your household drain. Replace if your hose is cracked, kinked, leaking, or clogged with debris buildup.

This shock absorber dampens vibrations and movement of the wash tub during the spin cycle. It connects between the outer tub and the base frame to keep the tub stable and reduce excessive shaking. Replace this part if the washer vibrates excessively, makes loud banging noises during spin, or walks across the floor during operation.