Richard L Norwell , MA April 25, 2022 The right rail pull out on my Bosch dishwasher failed. I ordered a replacement for both the right and left, BUT I was shipped 2 lefts. I called AppliancePartsPros.com and they immediately sent me the right and left at no charge! Sometimes people do make mistakes, what truly sets these folks way above average is their immediate no-nonsense approach to making things right ! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Howard W Spokane , WA May 20, 2022 Rollers on Bosch dishwasher lower dishrack. Ordered parts from AppliancePartsPros.com and did look at the videos that they supplied. The repair was very easy thanks in part to the videos. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Frank J H Frederick , MD February 17, 2020 Appliance: Model AP5953763 Wheels on upper bosch dishwasher rack assembly were bent Ordered new wheel kit. At first I couldn't see how the old assembly was to be removed. The entire assembly was slightly bent and did not easily move up & down as it should. With pliers I bent back the single tab on the old assembly. After pressing the raise-lower lever, the assembly slipped down and past the bend of the dishwasher rack and then folded outward so that the assembly could be removed easily. The problem was the broken bent wheels prevented the assembly from moving down to the removal position. The new assembly went back where the old one was located, and without bending anything, the single tab slipped-up on the dishwasher rack and the repair was complete. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers
Thomas C Townsend , DE July 18, 2023 Pull out rail wheels worn. Replaced both sides. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Norman W Green Bay , WI March 30, 2024 Appliance: Model SHP65CM5N/24 I accidentally dropped a bag of rice onto the middle tray the weight shattered the front wheel on the right side rail pull out The wheel is a permanent part of the rail pull out assembly. You have to order the whole thing. Also, you cannot buy just the left or right assembly you have to get both of them. Once the parts arrived it took me a few minutes to figure out how to get the old one off. It turned out that there is a small metal tab that is bent down holding the assembly in place. You have to straighten the tab to remove the assembly. Once the tab is straightened the assembly slips down and out. When the new assembly is in place the new tab has to be bent down to hold the whole thing in place. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers