Blower Housing Parts

• Ice maker not making ice
• Ice maker won't dispense ice
• Leaking

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

The part went on easily. U Tube video answered any questions I had before installing. Read more

• Will not tumble
• Takes too long to dry
• Noisy

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

I wanted to avoid pulling the drum. Luckily, my blower was easily accessed by pulling the front bottom panel. A couple of sheet metal screws were all I needed to remove the fan housing cover. I knew the fan was on reverse threads, i.e. righty-untighty. As it spins it tightens so no need for a retaining nut. I took off a screw holding on the exhaust tube and wiggled it out. I found the broken teeth inside. With the tube out of the way I was able to slide a crescent wrench in back and place... Read more

• Noisy

The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more

I took it apart and found the drain pump motor had come apart. I found appliancepartspros.com and read the reviews for this company. Customers were very satisfied with the parts and service. I ordered the parts (at a savings of over 30% from my local appliance store) and had them in 2 days (YES TWO DAYS). Totally excellent service. Put the washer back together and it works like new. The repair was very easy to do myself and saved me well over $100. I recommend your company to every do it... Read more

Tried CLR to remove hard water deposits. That did not help. Ordered new dispenser. The GE series that the detergent module fits in was a little difficult to open. Finally found a video explaining the whole door had to come off in order to open it up to replace the module. Works great now. Read more

• Will not dispense detergent

Process was a bit more complicated than the videos I had watched online. Had to remove both front panel and control panel to get to soap dispenser. Removed wires to soap dispenser and rinse aide dispenser. Removed wire "harness" around the top and right side of dispenser. Pried back the clips to allow dispenser to be pushed out. It was helpful to have another person to hold the door open at this point. Bent clips back and reinstalled everything. New part works great. Read more

• Will not dispense detergent

I ordered the part, looked at a YouTube instructional video on how to do it, and did it myself. It wasn't too hard, and I have no experience. I received the part very quickly! Read more

It was a really simple fix, and I kick myself for waiting so long to attempt the repair. Following the YouTube video, I had the old motor out and the new one in in approximately 10 minutes. I even felt the satisfaction of having completed a repair project. Read more

My husband expected we needed a new dishwasher but I insisted on trying to fix it first. You need a Torx screwdriver so make sure you have a set. A little difficult to get cover back on and lined up by myself, but I managed and this was my first attempt at major appliance repair. I replaced the entire console and the dispenser. Still working after 3 loads so my husband may have to eventually admit that I fixed it. Read more

Replaced dispenser Read more

I had to take the top panels off and two back panels off. Took off about thirty screws. It was very dirty and dusty inside so I took the lower panels off as well to clean and vacuum it. The hardest part was getting the double oven out of the cabinet. Overall it was very doable. Read more

Diagnosed the problem by seeing the lower fan was not turning. Didn't have any squeaks or sounds as a warning sign... It just stopped working. Went to AppliancePartsPros.com typed in my make & model number (Samsung NE58F9710WS). The web site pulled up the parts schematic, I navigated to the part on the schematic (Assembly #8 - Assy Motor Convection-Re DG96-00110B / AP5580897) and ordered it "Express Shipping" because I need the oven for Thanksgiving. When the part arrived, it looked identical... Read more

After researching the problem, I ordered a new cooling fan. My "fix-it" guy winds up in the ICU for 3 weeks! So...YouTube here I come. It appeared pretty simple in video form, except the video wasn't of my stove. All in all, what looked like no more than a 6 screw removal, turned into tearing 1/2 the stove apart. Still, only took about 2 hours start to finish. Best lesson learned, turn off the energy efficiency mode!!! Read more