Fgid2474qfob Parts

The Pressure Sensor is an OEM part for Frigidaire dishwashers. It monitors the water pressure within the dishwasher to ensure optimal performance during the wash cycle.

Causes of a bad pressure sensor can include electrical faults, buildup of debris or mineral deposits, or general wear and tear from regular use.

Symptoms of a bad pressure sensor include:

• Poor cleaning performance
• Dishwasher not filling with water properly
• Error codes related to water pressure
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. It is responsible for controlling the flow of water into the dishwasher, ensuring the correct amount of water is used during each cycle.

Causes of a bad valve can include mineral buildup, wear and tear over time, or damage from high water pressure or freezing temperatures.  

Symptoms of a bad valve include:

• Dishwasher not filling with water
• Water leaking from the valve area
• Irregular water levels during cycles
• Delayed or incomplete wash cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Lower Spray Arm is an OEM component specifically designed for Bosch dishwashers. It spreads cleaning water and detergent beneath dishes on lower racks and shelves. 

Uniform coverage is provided through the spinning spray of multiple strategically placed nozzles. Dedicated lower basket washing power tackles tough soils.

Causes of spray arm malfunction can include clogs from food debris accumulations over time. Impeller damage from hard impacts inside the wash chamber is also possible.

Symptoms of a defective lower spray arm include: 

• Poor or ineffective cleaning on lower racks and surfaces
• Dried-on food remaining in hard-to-reach crevices below  
• Noticeable decreases in water pressure impacting lower wash

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models sharing uniform wash architectures. Replacement ensures balanced upper and lower cleaning performance.
 

The Dishwasher Control Panel is an OEM part for Frigidaire dishwashers. It contains the buttons and touchpad that allow for cycle selection, temperature adjustment, and other feature control.

Over time, the control panel can experience issues like non-responsive buttons due to normal wear on electronic components or moisture damage. Physical impacts are also known to potentially compromise its function.

Causes of a bad control panel include:

• Unintentional water intrusion degrading internal circuits
• Repeated impacts like those from a dropped object
• Breakdown of touch sensitive surfaces

Symptoms of a bad dishwasher control panel include:

• Stuck or unresponsive buttons
• Inability to select desired cycles
• Failure to display selected options
• Touchpad no longer reacting to input

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain air, moisture, or fluid so the unit operates efficiently and reliably over time.

• Provides a compressible barrier between components to prevent escaping air or liquids
• Helps maintain proper performance when the original seal is worn or deformed
• Common symptoms include poor sealing, seepage around a joint, or visible cracks/flattening
• Replace if cut, brittle, misshapen, or no longer seats securely

• Disconnect power; shut off water or gas supply before servicing
• Note the seal's orientation and seating depth before removal
• Clean mating surfaces and grooves; avoid sharp tools that could damage the new seal
• Seat the new seal evenly all the way around; reassemble and test for a proper seal

This electronic control board governs the dishwasher's cycles and overall operation. Replacing a failed board can restore proper cycle selection, start-up, and progress so the appliance runs reliably again. What it does

• Orchestrates cycle timing and switching of internal components
• Processes inputs from sensors and the door switch to manage operations
• Communicates with the user interface/console and status indicators
• Failure symptoms include: won't start, unresponsive controls, cycles that pause or won't advance, random beeping, or error codes

• One electronic control board

• Disconnect power at the breaker before servicing; verify no power is present
• Use ESD precautions; handle the board by the edges only
• Photograph/label connectors and transfer them one at a time to the new board without forcing pins
• Inspect wiring and the door switch/harness for damage before reassembly and testing

The Pressure Switch is an OEM part for Frigidaire dishwashers. It plays a crucial role in monitoring water pressure inside the dishwasher, signaling the control module when to activate various components during the wash and rinse cycles. Overl or under pressure conditions could damage the dishwasher or prevent it from cleaning properly.

Symptoms of a bad pressure switch include: 

• Dishes not getting fully clean 
• Cycles not completing or getting stuck
• Error codes displaying
• Strange noises or leaks coming from the dishwasher

Causes of a bad pressure switch can be wear and tear over time, mineral buildup interfering with the switch's function or accidental damage from household chemicals or objects left in the dishwasher. 

This OEM Frigidaire replacement part is designed to function like the original part for reliable performance. It is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

The Wash Arm Bearing is an OEM replacement part for Frigidaire dishwashers. It is a crucial component that supports and facilitates the smooth rotation of the wash arm during the dishwashing cycle. The wash arm is responsible for spraying water and distributing detergent solution evenly throughout the dishwasher tub, ensuring thorough cleaning of dishes.

Causes of a bad wash arm bearing include wear and tear over time, exposure to debris or hard water buildup, or physical damage due to impact or mishandling. A faulty bearing can lead to issues with the wash arm's rotation and water distribution.

Symptoms of a bad wash arm bearing include:

• Excessive noise or grinding sounds during the wash cycle
• The wash arm not rotating or spinning properly
• Uneven or incomplete cleaning of dishes
• Water not being distributed evenly within the dishwasher tub

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

This dishwasher hose routes water between internal components to support proper wash and drain performance. Replacing a cracked or leaking hose helps prevent water damage and restores reliable water flow inside the machine. What it does:

• Carries water between internal components during wash and drain cycles
• Helps maintain a watertight path to prevent leaks inside the cabinet
• A damaged hose can lead to puddles under the unit, water in the base pan, or reduced wash/drain performance
• Visible splits, pinholes, soft spots, or kinks are signs the hose needs replacement

• 1 hose

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward for access and place towels to catch residual water
• Transfer/reuse existing clamps or replace if worn; ensure secure, leak-free connections
• Route the hose without kinks and run a short test cycle to check for leaks

This drain pump assembly removes water from the tub at the end of wash and rinse cycles, helping your appliance complete cycles and prevent standing water.

• Pumps wastewater out through the drain hose to the household drain
• A failing pump can cause slow or no draining, cycle interruptions, or error codes related to draining
• May also present as water left in the tub or an inability to start the spin/drain portion of a cycle

• Unplug appliance and shut off water supply before service
• Have towels or a pan ready—residual water will drain when hoses are removed
• Note wire and hose orientations before disconnecting; transfer any mounting hardware from the original if reused
• After installation, check for leaks and run a short drain cycle to verify operation

This Rack Roller is an OEM part for Frigidaire dishwashers. It is an essential component for the smooth and stable movement of the dishwasher rack. 

Rack rollers can wear down or become damaged due to regular use, excessive load, or general wear and tear. A malfunctioning rack roller can make it difficult to slide the rack in and out, and may even cause the rack to become misaligned or unstable.

Symptoms of a failing rack roller in a dishwasher include:

• Difficulty in sliding the dishwasher rack in and out.
• A wobbly or unstable rack during movement.
• Unusual noises, such as scraping or squeaking, when the rack is moved.
• Visible wear or damage on the rollers.
• The rack getting stuck or not sitting properly in the dishwasher.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This small retainer clip secures a mating part in the correct position inside your appliance, helping prevent movement, premature wear, and noise. Replace a cracked, bent, or missing clip to restore a tight, reliable hold.

• Provides a positive hold to keep the component properly seated
• Maintains alignment to reduce vibration and rattling during operation
• Helps prevent parts from backing out or disconnecting over time
• Common signs of failure: loose or misaligned component, rattling, clip that falls off, or visible damage

• Disconnect power; if working near any water connections, also shut off the water supply
• Note the clip's original orientation and position before removal
• Use needle-nose pliers or a small flat-blade screwdriver to release/install; avoid deforming mating tabs
• Ensure full engagement and that the secured part is firmly held before reassembly and testing

The Drain Filter is an OEM component specifically designed for Frigidaire dishwashers. It is designed to trap food particles and debris from exiting the dishwasher and entering plumbing drains.

Causes of failure usually stem from normal wear and potential mineral deposits reducing pore size over many years of use. Hard water areas present additional stress. 

Symptoms of a clogged or ineffective drain filter include:  

• Slow or incomplete draining after cycles
• Gurgling noises from drain line blockages
• Potential plumbing backups and repairs from unfiltered waste

This OEM part fits Electrolux, Gibson and Kenmore models as well.

This pair of upper-rack adjusters secures and guides the dishwasher's top rack, letting it ride smoothly on the track and maintain proper alignment for loading and cleaning. Replaces worn or damaged adjusters to restore stable rack movement. What it does

• Guides the upper rack along its rail and keeps the rack aligned during sliding
• Replaces broken or worn adjuster pieces that cause the rack to stick, wobble, or fall off the track
• Helps maintain correct rack height and position for even spray coverage and loading
• Restores smooth, quiet rack operation when original guides are damaged

• One right upper-rack adjuster and one left upper-rack adjuster

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Remove the upper rack and slide or pop off the old adjusters per the manufacturer's instructions
• Install the new left and right adjusters on their respective sides; verify smooth movement before returning the rack to service
• If fasteners or rails are damaged, replace them as needed; for model-specific procedures

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.