Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more
Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.
Replaced filters Read more
Protects and diffuses LED light inside your refrigerator. Replace if cracked, discolored, or causing dim lighting. Verify fit with your model number.
While waiting for parts for GE repair man to fix the fan issue the interior lights acted up, first one flickered and then went out followed by all the rest going dim. After reading stories on your web site, I ordered a couple of replacement lights and after installing the burnt out one they all came back to full strength! Thanks for the info and parts! Read more
Seals the refrigerator fresh food compartment door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or loose. Verify fit.
The fix went great. I replaced the right-side door switch and it works great. The switch came as a three prong, and the original was a two prong. I matched the two prong wires with/on where they go on the switch, and it worked great. Next is the left door gasket. I am letting the new door gasket lay flat for a few days to see if the folded kinks/creases will relax out. They do instruct to use very hot water to get the folded shipping kinks out of it and will try that as a last resort. Read more
Gallon door bin for refrigerators. Attaches to the inside of the door to hold gallon-sized containers. Replace if cracked, broken, or missing.
Ordered 2 door shelves from Appliance Parts Pros for my GE Profile refrigerator and was pleasantly surprised to receive the parts in two days. Parts were well packaged and fit perfectly. Was very helpful to be able to view my models parts diagram on-line to assure I was buying the right part. Read more
The mullion hinge spring is a small coil spring that provides tension to the hinged mullion flap or divider between two refrigerator doors or compartments, keeping it pressed firmly closed when not in use. It ensures a proper seal and prevents cold air from escaping between the doors. Replace this part if the mullion flap hangs loosely, does not spring back into position, or you notice warm spots or frost buildup near the center divider of your refrigerator.
New spring Had trouble getting old spring pc out. drilled a small hole from bottom and pushed pc out with small paper clip. Worked good. Read more
Ice maker stopped making ice? This dual water inlet valve controls flow to both the ice maker and water dispenser. Common DIY fix for no ice production.
Ordered valves and new ice maker. Couple sites mentioned problem could be ice in the waterline and to make sure temps be set to 37 in frig and 0 in freezer. I had adjusted temps to these the day I ordered parts. Parts arrived a couple of days later so I opened up the ice maker and found the ice bin to be full! Guess the temp adjustment worked. I just kept the parts for when they are needed. For those unaware, access to the ice maker is really simple. There is a latch on the backside of the... Read more
Refrigerator not cooling properly? A failed condenser fan motor prevents heat dissipation. Most DIYers replace this in under 30 minutes with basic tools.
Replaced condenser fan Read more
Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.
I purchased the part & was able to replace it myself based on the diagrams on the site. Read more
Fix freezer not cooling or loud grinding noise from your refrigerator. This evaporator fan motor circulates cold air over coils. DIY-friendly repair.
Vacuumed out coils on the condenser. Read more
Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.
Replace your cracked, broken, or missing refrigerator freezer door handle. Provides a sturdy grip for opening the freezer door. Quick install with basic tools.
Replaced them both within 10 min.very fast and reliable customer service.thanks Read more
Replace the dispenser actuator paddle on your refrigerator when it becomes cracked, broken, stuck, or won't release properly. Installs at the front.
Buy the Cover Pad Assembly, reviewed youtube for a video, and following the instructions. Easy Read more
Refrigerator not cooling? Compressor won't start? This inverter board controls compressor speed and cooling. Moderate DIY repair with electrical testing.
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.
Easy fix with parts ordered. No tools. Parts fit perfectly! Best service. Parts arrived the next day!! Read more
The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.
Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.
Symptoms of a bad Cover Latch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced the ice box door assembly. I did it myself. Took all of 15 minutes Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.