Glda690pbb-- Parts

The Lower Dishrack Stud and Roller Assembly is an OEM part for GE dishwashers. It is essential for the smooth operation of the dishwasher's lower dishrack, allowing it to slide in and out. This assembly includes the roller that attaches to the dishrack and the studs that secure these rollers in place.

Symptoms of a bad Lower Dishrack Stud and Roller Assembly include:

• The dishrack sticking or jamming when moved
• Rollers falling off or breaking
• Unusual noises when the dishrack is pulled in or out
• Difficulty in keeping the dishrack aligned within the dishwasher

Common causes for issues with the assembly often involve regular wear and tear, accumulation of detergent residues or food particles that can corrode or clog the rollers, and accidental damage from handling. If the rollers or studs are damaged, replacing them can greatly improve the functionality and longevity of your dishwasher.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement dishwasher detergent dispenser stores detergent and releases it at the correct time in the cycle, while also controlling rinse-aid dosing. It restores reliable cleaning performance when the original dispenser is damaged, leaking, or won't open.

• Holds detergent securely and opens on command during the wash cycle
• Meters rinse aid during the final rinse to help reduce spots and film
• Seals to the inner door at the dispenser opening to help prevent leaks
• Typical symptoms: detergent left in cup, dispenser door won't latch/pop open, rinse aid not dispensing or leaking, visible cracks or warping

• Disconnect electrical power and turn off water supply before servicing
• Open the door and remove inner-door panel screws to access the dispenser
• Unplug the wire connector(s), release retaining screws/tabs, and remove the old dispenser
• Clean the door cutout, seat the new gasket evenly, secure the dispenser evenly, reconnect wiring, and run a leak check

This microfilter sits in the dishwasher sump to capture fine food particles so water recirculates cleanly. Replacing a torn or clogged filter can help restore wash performance and protect the pump and spray arms from debris.

• Screens out fine debris to keep recirculating wash water cleaner
• Helps prevent redepositing and spray-arm clogs
• Common signs include gritty residue on dishes, poor cleaning results, visible tears/warping, or a filter that won't lock securely

• Disconnect power at the breaker before servicing.
• Open the door and remove the lower rack.
• Twist to unlock and lift out the old filter; clear any debris from the sump (locking direction varies by model).
• Seat the new filter fully and rotate to lock; ensure it's flush and secure.

This dishwasher water inlet valve controls the flow of water into the tub during the fill cycle. Replacing a sticking or leaking valve restores proper filling performance and helps prevent unwanted water or leaks.

• Opens and closes to allow the correct amount of water into the dishwasher
• Works with the control/float system to stop water flow at the right time
• Typical symptoms: won't fill or fills slowly; hums but no water; leaks at the valve or hose connections; water seeping into the tub when the unit is off

• Disconnect power and shut off the water supply before servicing
• Access the valve behind the lower kick panel; label/photograph wire positions and place a towel to catch residual water
• Install in the same orientation; secure the outlet hose with the included clamp and reconnect the inlet line and wiring
• Restore water and power, run a short fill test, and check all connections for leaks

This upper rack rail cap replaces a worn or missing end cap that secures the dishwasher's upper rack to its rail, helping keep the rack aligned and preventing it from sliding off during loading and operation. What it does:

• Fits on the end of the upper rack rail to hold the rack assembly in place and keep it tracking smoothly.
• Helps prevent the upper rack from slipping off the rail or becoming misaligned during use.
• Replaces cracked, broken or lost end caps that expose the rail or allow the roller/track hardware to disengage.

• Always disconnect power to the appliance before beginning any repair.
• Pull out the upper rack to access the rail end; the cap typically snaps or pushes onto the rail end—apply firm, even pressure to seat it fully.
• Inspect adjacent rollers, retainers and the rail for damage while the rack is removed; replace any damaged parts to ensure proper function.

This pump hose and clamps create a sealed connection between the dishwasher's pump and internal plumbing. Replace when the hose is cracked or clamps are corroded/loose to stop leaks and restore a secure, watertight fit. What it does:

• Creates a sealed connection between the pump and internal plumbing
• Helps contain water flow during wash and drain operation
• Replace if the hose is cracked, brittle, swollen, or deformed
• Symptoms include water leaking under the dishwasher or loose/corroded clamps

• Disconnect power and water; pull the dishwasher forward as needed for access
• Expect residual water—protect flooring and have a towel or pan ready
• Remove old clamps and hose; fully seat the new hose on fittings, then position and secure clamps at the bead/ridge
• Run a brief cycle and check for leaks before reinstalling

Upper dishrack stop.

NOTE: The clamps no longer come with the connector hose. The part number for the clamp is WD01X10322.

If looking for the two wheel guide rail bracket order WD12X10221

This rack stemware insert secures glasses and stemware in the dishwasher rack to help prevent tipping and chipping during cycles. Durable plastic holds stems upright for safer cleaning. What it does:

• Clips into the dishwasher rack to support wine glasses and stemware
• Helps keep tall or fragile glasses from tipping, banging or breaking while washing
• Maintains spacing between stems to improve water flow and cleaning
• Fits into existing rack wire tines to convert a standard rack into a stemware-safe area

• One rack stemware insert

• Remove the dishwasher rack to align and clip the insert onto the rack wires; ensure it snaps securely before returning the rack
• No electrical disconnection required, but remove dishes and check for sharp rack edges during installation
• Do not use if the part is cracked or broken; replace to avoid glass damage
• Hand-wash the insert if needed and place back in rack before running dishwasher

This lower manifold support secures the appliance's lower manifold assembly, keeping water and valve components properly aligned for reliable operation and reduced movement. It helps prevent undue stress on connections and reduces wear. What it does:

• Holds the lower manifold/valve assembly in the correct position to prevent sagging or misalignment
• Reduces vibration and movement that can lead to loose fittings or leaks
• Helps maintain a proper seal at manifold connections to minimize water drip or seepage
• Can stop rattling or clunking noises caused by a loose manifold assembly

• One lower manifold support bracket

• Disconnect power and turn off water supply before starting work
• Basic hand tools required; handle the manifold and connected tubing carefully
• Inspect adjacent gaskets, hoses and fittings for wear and replace as needed

This connecting ring nut secures a threaded water-path connection inside the dishwasher, helping keep the joint tight and leak-resistant. Replace a cracked, stripped, or missing nut to restore a secure fit and reliable operation.

• Tightens and holds a mating connector, tube, or manifold in place
• Helps maintain a watertight connection when used with the proper seal
• Replaces worn or cross-threaded hardware that can cause leaks or loose joints
• Typical symptoms include dripping at the connection, a loose hose/manifold, or difficulty keeping the fitting tight

• Disconnect power and shut off the water supply before servicing
• Access the joint; start threads by hand to avoid cross-threading, then snug with the proper tool—do not overtighten
• Inspect any O-ring or gasket at the connection and replace if worn
• Restore water and check for leaks before reassembling panels

This sprinkler nozzle directs wash water into a focused spray inside the dishwasher for effective coverage. Replacing a clogged or damaged nozzle restores proper spray pattern and helps improve cleaning results, especially on the upper rack.

• Channels water through the sprinkler assembly for targeted spray coverage
• Maintains the correct spray pattern and pressure for thorough washing
• Replace if clogged with mineral deposits, cracked, loose, or missing
• Symptoms can include poor cleaning, weak/uneven spray, or the upper rack not getting clean

• Disconnect power and water supply before servicing; allow the tub to cool
• Pull out the rack to access the sprinkler area; remove the old nozzle (snap or twist fit varies by model)
• Clean mating surfaces and install the new nozzle securely, ensuring proper alignment
• Run a short test cycle to verify normal spray operation

This sump gasket seals the dishwasher's sump to the tub to keep wash water contained. Replacing a worn or flattened gasket helps stop leaks and maintain proper wash and circulation performance.

• Creates a watertight seal between the sump/pump assembly and the tub bottom
• Helps prevent leaks onto the floor or into the base pan
• Maintains wash pressure and circulation by preventing air intrusion
• Replace if torn, cracked, deformed, or if water is leaking from the center/bottom of the unit

• Disconnect power and water before servicing; use gloves to protect from sharp edges
• Access the sump from inside the tub or underside (model dependent); remove spray arm/filter as needed and release the retaining ring or tabs
• Clean mating surfaces; install the new gasket evenly without twists and ensure proper orientation
• Reassemble and run a brief fill/wash to check for leaks before fully reinstalling

The Spray Arm Connector Assembly is an OEM replacement part for GE dishwashers. This assembly connects the upper and lower spray arms to the water inlet valve, allowing water to flow through the spray arms during the wash cycle. 

Symptoms of a bad spray arm connector assembly include: 

• Uneven or inconsistent water coverage on dishes
• Clogged or kinked spray arm assemblies 
• Leaks at the tub connections
• Reduced water pressure impact 

Causes of a bad spray arm connector assembly can be mineral buildup affecting water flow, cracked or damaged connectors, or wear over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.