Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.
Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.
Symptoms of a bad micro switch include:
This OEM LG part is also compatible with Sears/Kenmore models.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
The Turntable Tray is an OEM part for Frigidaire microwaves. It sits inside the microwave and rotates food to ensure even cooking and heating. Made of durable glass, this tray is designed to withstand high temperatures and the repetitive motion of the microwave's turntable motor.
Damage can occur due to accidental drops, placing heavy items on the tray, or thermal stress from repeated heating cycles.
Symptoms of a bad turntable tray include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
The employee I worked with first thought my problem might be the plastic part the tray rest upon. she sent a photo of it and it matched the one I currently had. She ten sent a photo of the tray. This part turned out to be the correct match of what I needed. ApplianceParts sent it quickly and well packed. Thank you for your quick response and help. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-7/8" x 7-7/8" x 3/32" (5.875 x 7.875 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Just installed it to the wall & presto... Read more
Microwave door won't open when you press the button? This door release lever connects the button to the latch mechanism. DIY fix in 30 minutes.
Turn off breaker, remove all screws { 4 on mine } inside oven door holding oven and microwave to kitchen cabinet and slide oven assembly out of cabinet {on to a temporary shelf of {4} 5 gallon buckets/plywood/bricks/shims that I made on the floor atop a scrap of carpet} just enough to access the side and rear screws of microwave's protective metal housing, then remove a total of 16 screws { there were 2 screws just inside top of "opened" microwave door that were holding top flat silver metal... Read more
Microwave won't heat or makes loud buzzing noise? The diode regulates magnetron current flow. Simple repair—test with multimeter for continuity.
I have a multimeter so I was able to check the fuse per website recommendations and it was blown. However, the capacitor on the microwave was also original so I elected to replace the capacitor, fuse, and the ground protect diode. The repair was very simple (making sure the capacitor was discharged before replacing) and the microwave is now up and running again. Excellent trade to buy $40 worth of parts rather than a new $400 microwave. One nit - Kenmore puts a screw in the back that... Read more
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
Microwave not heating or making loud buzzing noise? The magnetron converts electricity into microwave energy. Common DIY repair, typically done in 30 minutes.
Micro stopped working with accompanying loud hum and burning smell. Pulled out of cabinet (micro/stove combo by Electrolux) and found blown (and partially melted) magnetron. Easily found exact replacement on Appliance Parts Pros--ordered, and had micro back working in 2 days! Great search engine and pictures of parts are so helpful;. Have ordered from these folks in the past and will probably do it again. $100 part versus big cost for repair service or a replacement. Read more
Protects the magnetron antenna opening inside your microwave cavity. Replace if cracked, burned, or has food buildup to prevent arcing and sparking.
Replaced with new cover from appliancepartspros.com, and it works like new. Easy to install with no tools required. Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Charcoal air filter captures grease, smoke, and odors in over-the-range microwaves. Replace when performance declines. Confirm fit with your model number.
Ordered a new one online. Was easy and delivered earlier than expected. I changed it myself Read more
Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.
I replaced the bulbs in my over stove microwave light. Read more
Turntable stopped turning or making noise? This microwave motor rotates the glass tray for even heating. Easy DIY fix with basic tools in under an hour.
I googled the make and model, and found the part on AppliancePartsPros.com. The underside of the oven has a metal grille with numerous openings of various shapes and sizes. There is a rectangle that is punched into this grille, just below the motor. I pried between the vent holes to snap the connections near the perimeter on the punched rectangle. I only did this on three sides. Then pry up the rectangle away from the connected side. Undid the hold down screw, separated the motor from the... Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.
Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more
Bracket that mounts and aligns the door latch switches inside your microwave. Replace if cracked, broken, or clips are damaged from prior switch removal.
REPLACED THE DOOR SWITCHES HOLDER ASSY---LABELED HOLDER ASSEMBLY LOCKER, WHICH CAME WITH ALL 3 DOOR SWITCHES ALREADY MOUNTED IN THE HOLDER ASSEMBLY, IT WAS EASY TO REPLACE, JUST 2 SCREWS BUT YOU DO NEED TO PULL THE FRONT PANEL ASSY FORWARD BY REMOVING 1 SCREW AND LIFTING IT UP AND OUT WHOLE JOB TOOK ABOUT 1/2 HOUR appliancepartspros.com GAVE QUICK DELIVERY MUCH APPRECIATED BOB B. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.