Lite Top Loaded Holder Model Parts

I bought the new arm assembly because after a few times of going in through the front of the machine and reaching in the back under the drum I could get to the pulley, so I took it off of the arm and lubed it and then replaced it back inside, put the belt back on and it was good for a week or so , then started squeaking again. So after doing this about 6 times I got the impression that is was the wheel and shaft on the arm were worn out causing the wheel to wobble and wear the arm. I then... Read more

Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking. I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was... Read more

Just snapped and slid it into place, very simple. Read more

I took the old one off and put the new one on. Easiest repair ever! :-) Read more

I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here. Dryer is fixed, I'm happy. Read more

Ordered the part, which was easy and smooth. Watched you tube video on how to repair. Took me 15 minutes. Easy as it could be. Read more

My brother purchased an older model KitchenAid mixer. It works great. I ordered the Dough hook and the flat beater on Ebay. They did not fit. They were too long. After investigating the model number, my model is about 30 years old, I called Appliance Pros and they were very helpful in finding the correct parts for me. I ordered, and they work great. Thanks for your help. Read more

A few months back I changed out the "Bearing Slides" on the front side of the drum thinking that would stop the annoying squeaking every time we use the dryer. They were very worn and one was missing. But to my dismay it only lessened it by about 10%. After doing a bit more research I discovered the "Rear Shaft Bracket Assembly" also needed replacement. The tip was worn way down and clearly the source of the noise. It was actually a very simple repair except for the fact that the key to the... Read more

We called a repairman out who was rude, obnoxious and seemingly incompetent. After an hour of dissembling our dryer, he quickly slapped it back together and told us it would be $200 to fix. No other explanation. We sent him on his way and I found your site, found the ($5) part and watched the 5 min repair video. Ordered the part and had it in our hands in less than 48 hours. I had the dryer repaired in 20 min. Saved us a lot of money and made me feel pretty good about my own normally meager... Read more

Replace the lid. Read more

• Touchpad does not respond

I added another tool. Read more

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

My teenaged son took the old washer door off and apart. He replaced our glass from our washer onto the new doors and attached it to the hinge. These doors are compatible with Kenmore washer even though it says Frigidaire. Read more

Replaced Wire Whip. Read more

I was ready to scrap my $300. mixer and get another one. I thought it certainly would cost more than it was worth to send it in for repairs. Then I watched a video by AppliancePartsPros.com and saw that it may just be a worn gear. So I followed their directions on taking it apart and inspecting it. I ordered a $13. gear, replaced it in about an hour, re-greased it, and now it works like new. They saved me about $300. Their step by step videos are great. They know their stuff! Read more

My brother purchased an older model KitchenAid mixer. It works great. I ordered the Dough hook and the flat beater on Ebay. They did not fit. They were too long. After investigating the model number, my model is about 30 years old, I called Appliance Pros and they were very helpful in finding the correct parts for me. I ordered, and they work great. Thanks for your help. Read more