966-4Cw Parts

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

The mandrel pulley or spindle pulley is a metal part that spins the blades of a riding mower as it is turned with a belt. Though quite durable, on occasion, something happens to dent or warp the pulley housing, interfering with the turning of the blades and creating a dangerous situation. Once you have found a stationary place for the mower and made certain it cannot be started, drop the mower housing by removing the locking pins and arms. Next, you’ll want to disconnect the spring from the clutch rod. This will allow you to roll the mowing belt off the engine pulley. Remove the deck from beneath the tractor. Using a lubricant, remove the flange nut from the pulley assembly. Next, take the top flange nut off the pulley with a socket wrench. Penetrating oil may be required. Take the pulley from the spindle. Reassembling the unit is a matter of walking back through the disassembly process. This spindle pulley is an OEM replacement manufactured by Husqvarna. In addition, it is compatible with many Craftsmen mowers as well. This OEM part is individually packaged and sold.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This lug nut is a genuine Husqvarna part, sold individually. This lug nut can be used as a replacement part in a lawn mower. The purpose of the lug nut is to serve as a fastening part, in conjunction with a bolt, in any number of components within a lawn mower.The lug nut in a lawn mower is a small component that might be lost or misplaced easily, as its absence might not cause a direct effect in the operation of the appliance. However, if the lug nut is found to be missing, it should be immediately replaced by this genuine OEM replacement part. Additionally, the lug nut can suffer damage. If the lug nut is sufficiently stripped to render its function reduced or negated, it should be replaced.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lug nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This grease cap is a genuine Husqvarna part, sold individually. This grease cap can be used as a replacement part or a lawn tractor. The purpose of a grease cap is to affix to the lever in order to insulate the bearing from accumulating external materials such as dirt and debris.The grease cap of a lawn mower or a lawn tractor might be subject to replacement after long-term use from general wear and tear or after an accident or a collision with a hard object such as a rock or a curb. If there is damage to the grease cap that prevents it from keeping external materials out of the appliance, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This grease cap is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This part is a replacement spacer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spacer is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractors.This spacer is fitted into the lawn tractor's tires to help fill the gap within the tire axle. This ensures that the wheel can rotate smoothly. Proper tools are required to install this part, including a wrench set, hammer, and punch. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spacer, the appropriate owner's manual and equipment diagrams should be referred to. This spacer is suitable for use on a variety of lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a tire that is designed to be used with Husqvarna lawnmowers. The tire is made out of a hard rubber and attaches to the mower's caster fork. As time goes on, the tire can experience damage and may no longer work correctly. A visual inspection of the tire will indicate if the tire has any cracks, holes, or other areas of damage. If this has occurred, the tire will need to be replaced for the lawnmower to easily move across the lawn.A wrench set, a socket set, and a nut driver may be required to replace this part. A pair of work gloves can also be used during the replacement process. The process involves removing the bolt, the nut, and the spacer that are located on the caster fork. Next, remove the tire from the wheel so the new tire can be mounted in its place. Reassemble all parts before use.This tire is an authentic OEM replacement part that is sourced directly from the manufacturer. This component is sold on an individual basis. The part is made to be compatible with lawnmowers created by Husqvarna.

This replacement part is a bushing. This is a genuine replacement part made by Husqvarna. This part is responsible for adding space in the engine so that parts are able to operate without becoming overrun with friction. This helps keep the engine operating smoothly and effectively. A new bushing might be needed if the user notices unusual noises coming from inside the machine. This can be due to an out-of-place bushing and should be investigated. Be sure the engine is completely powered off and cooled down as often these parts can be hot due to friction. Refer to the proper user manual for more information on how to replace this bushing. This bushing is made of durable metal for long-lasting use.This bushing is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.