Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner won't light or igniter keeps clicking? This cooktop igniter creates the spark to ignite gas burners. DIY repair. Video guide available.
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope. I was able to find some Jennair (Maytag) parts but they are scarce. Later I found... Read more
Rubber feet that attach to the bottom of range grates for stability and surface protection. Replace worn, cracked, or missing grate feet kit.
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more
Burner won't ignite or stay lit? This potentiometer controls gas flow and ignition. Common DIY repair taking 15-30 minutes with basic tools.
After watching a youtube video, I disassembled the front cover on the cooktop (be sure to turn off the power supply). I then switched the potentiometers on two burners. The burner that was not working now worked and the burner that did work did not. Easy to find the culprit....ordered a new potentiometer from here and though I only got regular shipping, it was actually delivered the NEXT DAY! 5 minutes, put in the new part, and all burners work. Great site, thanks for the help! Read more
Venturi tube for gas ranges and cooktops. Mixes gas and air for proper burner combustion. Replace if cracked, corroded, or threads are damaged.
Brass nut secures the jet holder assembly on gas ranges and cooktops. Replace if stripped, corroded, or damaged during burner maintenance or repair.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
If your burner won't ignite or sparks constantly, the spark ignition switch likely failed. Controls surface burner ignition. Moderate DIY repair.
Replaced switch that's attached to burner valve. Read more
Fix an oven that won't heat, turns off unexpectedly, or cycles on and off. This control board manages heating elements and temperature regulation.
Fix a range that won't reach set temperature or shows temperature error codes. This sensor monitors oven heat and signals the control board to adjust.
Replaced the bake element. The manufacturer did not leave enough wire to pull the connections into the oven so I had to open the back and locate the connections. Read more
Replacement jet holder for gas range and cooktop burners. Secures the orifice and channels gas flow. Order when original is corroded, damaged, or broken.
The oven was not heating, and there was no gas flow to the oven or spark. I replaced the spark igniter, but that did not fix it, so the problem was either the ignition device or the oven bake solenoid. In order to get to them, I had to cut the venturi tubes which hold down the burner rings with a Dremel tool, which was easy enough. There is no other way to get these tubes out if they are stiff or seized as you will simply twist the gas supply line to the burner if you try to rotate the nut.... Read more
Controls gas supply pressure to burner manifold. Replace if regulator is cracked, sticking, or no longer maintaining correct pressure for consistent flames.
Fixes burner not getting gas or won't ignite. Solenoid valve controls gas flow to individual burners. Moderate DIY repair for gas ranges and cooktops.
Fix an oven not heating properly or maintaining temperature with this convection fan motor. Requires front and back panel access. Standard tools needed.
Fixes range that won't broil or broil element not heating. This broil heating element restores high-heat broiling. Moderate DIY; allow 1-2 hours.
Ordered new part/self Read more
Replacement drip pan for gas cooktops and ranges. Sits beneath burners to catch spills and protect the cooktop base. Replace if cracked, warped, or rusted.
Gas burners won't light or keep clicking? This spark module generates consistent sparks to reliably ignite cooktop burners for safe operation.
If your range burner control knob jumps between settings or won't respond, this potentiometer provides precise position feedback. DIY-friendly repair.