Pfq97hspvds Parts

Washer won't drain or drains slowly? This drain pump and filter assembly removes wastewater and traps debris. Moderate DIY repair for most models.

Fix a washer that won't start or has a door that won't unlock with this door lock assembly. Secures the door during cycles to prevent leaks. DIY repair.

The Boot Gasket Clamp is an OEM part for GE washing machines. It secures the flexible boot gasket in the place where the washer connects to water supply lines. Proper installation with this clamp around the gasket helps prevent leaks at this critical water inlet point.

Causes of a bad boot gasket clamp include corrosion, cracks, or broken clips that no longer hold the gasket firmly in position. 

Symptoms of a bad clamp include:

• Water seeping or spraying from the boot connection area   
• Loose, slipping, or misaligned gasket that does not form a tight seal
• Rust or mineral buildup indicating long-term moisture exposure

This OEM GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore models. 

Washer won't start or door won't lock? This door latch securely closes and locks your washer door during operation, preventing leaks and errors.

Fix a washer that won't spin or makes screaming noises during the spin cycle. This drive motor powers the wash basket through all wash and spin cycles.

Secures the door gasket to create a watertight seal in your washer. Replace if you notice leaks around the door or a loose gasket. Confirm fit with your model.

Secures internal assemblies during washer transport. Replace if lost, stripped, or damaged during installation or moving. Essential for safe relocation.

Stabilizes the washer tub during spin cycles. Replace if cracked, worn, or causing excessive vibration. Installs between tub and frame. Sold individually.

Fix water not draining or leaking from your washer with a new tub to pump hose. Connects the tub to the pump for proper drainage during wash cycles.

This handle attaches to the refrigerator's internal water filter housing to secure and release the replaceable cartridge, making filter changes quick and reliable. Replaces a damaged or broken filter handle to restore proper filter removal and installation. What it does:

• Secures the water filter cartridge in the housing so it stays seated during normal use
• Provides a release point to remove the filter for replacement
• Stops leaks or loose fit caused by a cracked or broken handle
• Helps restore proper filter alignment and user access

• One filter handle

• Turn off the water supply to the refrigerator before servicing the filter assembly
• Remove the old handle by following OEM release instructions; replace with the new handle and confirm proper engagement
• No special tools typically required; use caution to avoid damaging the filter housing or surrounding trim

This door gasket seals the combi compartment to help maintain proper temperature and reduce energy loss. It replaces a worn or damaged seal so the appliance can keep food cold and run more efficiently. What it does

• Creates an airtight seal around the combi door to prevent warm air from entering the compartment
• Helps reduce frost buildup and moisture inside the compartment
• Reduces run time and cycling caused by leaking seals
• Stops visible drafts, condensation, or uneven cooling near the door

• One replacement door gasket

• Disconnect power before beginning repair and follow the appliance manufacturer's service instructions
• Inspect door frame and retainer for damage; clean mounting surface before installing the new gasket
• Gasket may require stretching, clips, or screws to seat properly—do not force or modify the part

Adjustable leveling leg for front-load washers. Provides stable support and proper leveling. Replace if broken, cracked, or worn to restore balance.

Fix excessive shaking and loud banging during spin cycles with this washer damper pin. Simple DIY repair using basic tools like pliers and a screwdriver.

Directs water from inlet to washer tub with secure clamp connection. Replace if cracked, worn, or leaking to restore proper water flow. Confirm fit.

This is a small LED light that illuminates the interior of the washing machine drum. It helps you see inside the washer when loading or unloading laundry. Replace this part if the interior light no longer turns on, flickers, or appears dim during operation.

This RH sensor detects moisture levels inside the appliance to help the control board manage humidity and maintain proper interior conditions. Replacing a faulty sensor restores accurate humidity feedback for normal operation. What it does:

• Measures interior relative humidity and sends a signal to the main control board
• Helps the control system adjust fan or damper actions to manage moisture
• Common symptom: incorrect humidity readings or persistent interior moisture/condensation
• Faulty sensor can contribute to uneven storage conditions or defrost control issues

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and wiring carefully; avoid touching the sensing element
• Verify connector orientation and secure wiring; do not force connectors