Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner won't light or igniter keeps clicking? This cooktop igniter creates the spark to ignite gas burners. DIY repair. Video guide available.
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope. I was able to find some Jennair (Maytag) parts but they are scarce. Later I found... Read more
Rubber feet that attach to the bottom of range grates for stability and surface protection. Replace worn, cracked, or missing grate feet kit.
Bought a Thermador PRSE48" dual fuel range from Craigslist really cheap because it didn't work. Did a little research and decided to overhaul most of the top (gas) end. For what I paid for it it was worth it and I'd have a good stove with new components. Replaced the griddle thermostat, ignition micro switches, ignition re-igniter box, installed fixing kit with 2 new potentiometers, both solenoids, and gas regulator. Had to replace 2 gas lines, all 4 jets, and one brass nut that were... Read more
Venturi tube for gas ranges and cooktops. Mixes gas and air for proper burner combustion. Replace if cracked, corroded, or threads are damaged.
Secures the igniter to your cooktop for proper alignment and stable ignition. Replace if igniters are loose or spark inconsistently. Confirm fit.
Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner. Read more
Fixes burners that won't ignite or spark continuously. This spark module generates the high-voltage needed for gas ignition. DIY repair, 1-2 hours.
Brass nut secures the jet holder assembly on gas ranges and cooktops. Replace if stripped, corroded, or damaged during burner maintenance or repair.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
Burner won't light or has no gas flow? This top burner valve controls gas to individual burners. Moderate DIY repair with basic tools needed.
If your burner won't ignite or sparks constantly, the spark ignition switch likely failed. Controls surface burner ignition. Moderate DIY repair.
Replaced switch that's attached to burner valve. Read more
Oven won't heat or takes forever to reach temperature? A weak or failing igniter is the likely cause. This range oven igniter is a 10-minute DIY fix.
Replaced both ignitors. Since I was working on the range I also overhauled the final 2 of the 6 burners on the stove top. Venturi tube and jet nuts were frozen and could not remove drip tray for cleaning and access to ignitor clip. Had to drill out Venturi tubes using a tapered bore bit. Used Dremmel with cutting wheel to remove jet nut. This range has been heavily used since new for 16 years. Works like new, again. Read more
Oven not heating? A failed bake element is the most common cause. This part generates heat for baking in the main oven cavity. Moderate DIY repair.
First guess was the Bake Element, but I ran my hands around it and didn't feel any clue of a break/failure in the element. Further research indicated that the Hot Wire Relay is the next likely cause, that was really bad news because that part is unavailable anywhere. Swapped the H1 and H2 wires on the Hot Wire Relay, and found that Broil still worked, which indicated that the relay was good and the Bake Element was the likely cause. This was good news because that Hot Wire Relay is made... Read more
1/4-inch gas supply tube routes fuel between internal gas components to the burner. Replace if cracked, damaged, or leaking to restore safe operation.
I had to cut out the venturi with one of those vibrating tools with a narrow metal blade like a hack saw. Takes time and wear your ear plugs . I had two different repair guys here they both said I need a new range . It's 15 years old and 9 grand to replace it. No No . I'll fix it and I did . Read more
Burner head and cap assembly for gas ranges and cooktops. Replaces cracked, warped, or corroded burner components affecting flame distribution.
Our appliance repairman said he would order a new burner cap. We waited 7 months; each time we called he said it was on order. After having to cook Thanksgiving and Christmas dinners on 3 burners we gave up and ordered the part ourselves. It took 5 days to get here and less than one minute to install; it fit perfectly and works like new. Read more
Controls gas supply pressure to burner manifold. Replace if regulator is cracked, sticking, or no longer maintaining correct pressure for consistent flames.
Replace your worn oven door seal to prevent heat loss and improve cooking efficiency. Essential when you notice gaps, tears, or hardening. Verify fit.
Oven takes forever to preheat or won't heat at all? This bake element restores bottom heat for consistent baking. Simple DIY repair with basic tools.
Ordered part, wait time was less than projected. Repair was simple. A few screws and voila! Read more
Covers and diffuses the indicator lamp on your range control panel. Replace when cracked, discolored, or missing to restore clear light visibility.