Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Psf26ngwc Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WR55X10025

The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.

Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.

Symptoms of a bad Temperature Sensor include:

  • The refrigerator or freezer not maintaining the set temperature 
  • The appliance running continuously or more frequently than normal
  • Inaccurate temperature readings displayed  

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This part fixes the following symptoms
  • Fridge too cold
  • Too warm
  • Fridge runs too long
  • Freezer too cold
See more...
Do-It-Yourself Stories from Customers like You Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately   Eddie R. • Debary , FL • January 06, 2015

I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more

More
$16.30
Compare At:
$22.39
You Save:
$6.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electromechanical Icemaker Kit
Genuine Ge part
By: Ge
Part Number: WR30X10093

The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.

Symptoms of a faulty electromechanical kit include: 

  • Ice not being produced or dispensing properly
  • The ice maker failing to turn on or stop automatically
  • Strange noises emanating from the ice maker

Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.

This part fixes the following symptoms
  • Ice maker not making ice
  • Ice maker won't dispense ice
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You No ice and leaking water   Jeff P. • Pinecrest , FL • November 01, 2019

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

More
$182.78
Compare At:
$215.68
You Save:
$32.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Defrost Heater And Bracket Assembly
Genuine Ge part
By: Ge
Part Number: WR51X10055

The Defrost Heater and Bracket Assembly is an OEM replacement part for GE refrigerators. It is responsible for facilitating the defrosting process, which is essential for maintaining proper cooling and preventing excessive ice buildup within the freezer compartment.

Symptoms of a faulty Defrost Heater and Bracket Assembly include:

  • Excessive frost or ice buildup in the freezer compartment
  • Inefficient cooling or temperature fluctuations
  • Water leaks or puddles forming inside the freezer
  • Unusual noises or burning smells during the defrost cycle

Causes of a bad defrost heater and bracket assembly can include normal wear and tear over time, electrical malfunctions, or physical damage to the heating element or bracket.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

NOTE: For a 9" double glass tube heater use WR51X10101

This part fixes the following symptoms
  • Too warm
  • Frost buildup
  • Fridge too warm
  • Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately   Eddie R. • Debary , FL • January 06, 2015

I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more

More
$85.79
Compare At:
$102.95
You Save:
$17.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Grommet, Fan Motor
Genuine Ge part
By: Ge
Part Number: WR02X12008

The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.

Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.

Symptoms of a faulty or missing grommet include:

  • Air leaks or drafts around the fan motor area
  • Condensation buildup or frost formation near the motor shaft
  • Increased noise or vibration from the fan motor assembly
  • Reduced cooling efficiency due to air leakage

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Evaporator fan motor whining keeping me up at night then it sounded like rocks were in it   Judy P. • Lakeside , CA • March 30, 2015

It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more

More
$7.41
Compare At:
$8.82
You Save:
$1.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ice Door Assembly
Genuine Ge part
By: Ge
Part Number: WR17X11653

The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.

Symptoms of a bad Ice Door Assembly include:

  • Frost or ice buildup around the dispenser area
  • Ice escaping from the dispenser when not in use
  • Failure to dispense ice
  • Noise during operation indicating misalignment or malfunction

Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Door sweating
  • Frost buildup
  • Ice maker won't dispense ice
  • Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Fruit And Vegetable Pan Shelf
Genuine Ge part
By: Ge
Part Number: WR32X26246

The Fruit and Vegetable Pan Shelf is an OEM part for GE refrigerators. Designed to provide sturdy support and optimal storage for fruit and vegetable pans, this shelf is an essential component for organizing and accessing your produce with ease. It fits snugly above the fruit and vegetable drawers, maximizing space utilization within the fridge and helping maintain the freshness of fruits and vegetables by ensuring proper air circulation around them.

A damaged or missing fruit and vegetable pan shelf can lead to disorganization and inefficient use of space in your refrigerator. 

Symptoms of a bad Fruit and Vegetable Pan Shelf include:

  • Sagging or inability to support weight, leading to instability of stored items
  • Difficulty fitting or securing the shelf in the designated slots
  • Visible cracks or damage that compromise the shelf's integrity

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Several broken tray/drawer pieces needing replacement   David C. • San Diego , CA • January 11, 2018

Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more

More
$55.66
Compare At:
$66.24
You Save:
$10.58

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ice Dispenser Solenoid
Genuine Ge part
By: Ge
Part Number: WR62X10055

The Ice Dispenser Solenoid is an OEM replacement part for GE refrigerators. It is a crucial component that controls the flow of ice from the ice maker to the dispenser chute.

Symptoms of a bad ice dispenser solenoid include:

  • Failure to dispense ice from the dispenser
  • Ice getting stuck or jammed in the dispenser chute
  • Continuous flow of ice even when the dispenser is not activated

Causes of a bad solenoid can include electrical malfunctions, physical obstructions preventing proper operation, or simply wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Ice maker won't dispense ice
  • Door sweating
  • Frost buildup
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$48.33
Compare At:
$57.56
You Save:
$9.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Water Tank Assembly
Genuine Ge part
By: Ge
Part Number: WR17X11440

The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature. 

Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water. 

Symptoms of a bad Water Tank Assembly include:

  • Leaks or puddling water beneath the refrigerator
  • A noticeable drop in water flow from the dispenser
  • Unpleasant taste or odor in the dispensed water
  • Visible cracks or damage to the tank or its connections

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Water tank leak   Gordon T. • Jonesboro , AR • January 27, 2017

Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more

More
$42.34
Compare At:
$50.81
You Save:
$8.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Recess Spring
Genuine Ge part
By: Ge
Part Number: WR02X10585

The Door Recess Spring is an OEM replacement part for GE side-by-side refrigerators. It sits within the icemaker door frame to control movement and allow smooth closing/opening of the access point.

Causes of a bad icemaker door recess spring include wear and tear of thin metal coils repeatedly compressing over many years of filling cycles. Exposure to humidity intrusions from melting ice accumulates oxidation shortening spring elasticity. 

Symptoms of a bad icemaker door recess spring include: 

  • Difficulty opening and shutting the icemaker access door securely
  • Excessive slamming noise caused by abrupt closing
  • Sagging or improper alignment of the door against the frame  
  • Struggles retaining positioning of the transparent plastic doorway

This genuine GE replacement spring is compatible with Hotpoint, RCA and Kenmore models.

This part fixes the following symptoms
  • Door latch failure
  • Ice maker not making ice
  • Not dispensing water
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing   Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

More
$7.91
Compare At:
$8.69
You Save:
$0.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Condenser Fan Motor
Genuine Ge part
By: Ge
Part Number: WR60X10220

The Condenser Fan Motor is an OEM part for GE refrigerators. This motor is vital for the efficient operation of the refrigerator, as it powers the fan that cools the condenser coils and helps to circulate air. Without a properly functioning condenser fan motor, the refrigerator can overheat, leading to poor cooling performance and increased energy consumption.

Symptoms of a failing Condenser Fan Motor include:

  • The refrigerator making unusual noises such as humming or buzzing
  • The back of the refrigerator feeling hotter than usual
  • The refrigerator cycling on and off more frequently
  • Food not being kept at the proper temperature

Common causes for a bad condenser fan motor include dust and debris buildup obstructing the motor, age-related wear, and electrical failures such as short circuits or burnt-out capacitors. Regular cleaning and maintenance can help prolong the life of the motor, but if these symptoms occur, a replacement may be necessary.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This is a 115-volt AC fan motor. For the 12-volt DC fan motor, order part number WR60X10209. Right-hand thread. The compatible fan blade is part number WR60X10207.

This part fixes the following symptoms
  • Fridge runs too long
See more...
Do-It-Yourself Stories from Customers like You Condensor fan motor went bad   Richard N. • Kidder , MO • December 15, 2015

First, cleaned all the dirt and lint from the condenser radiator, the fan motor is in a metal housing holding the fan motor in place. look carefully and there is a sheet metal screw at the bottom of the housing, 1/4 inch screw head sheet metal screw. I removed the screw and that released the housing from the base of frig. then very carefully , I turn the housing with the fan motor still in the housing a worked out of the frig base where it would be easier to replace the bad motor. the... Read more

More
$44.60
Compare At:
$53.07
You Save:
$8.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Board Asm Main Control
Genuine Ge part
By: Ge
Part Number: WR55X10942C

The Board Asm Main Control is an OEM replacement part for GE refrigerators. It serves as the electronic brain of the appliance, controlling and coordinating all the essential functions and operations of the refrigerator.

Causes of a bad refrigerator main control board can include electrical malfunctions, power surges, or physical damage due to moisture or impact over time.

Symptoms of a bad main control board include:

  • The refrigerator not powering on or responding to user inputs
  • Inconsistent temperature regulation or cooling performance
  • Error codes or fault indicators displayed on the control panel
  • Individual components or systems, like the ice maker or defrost cycle, not functioning properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice maker/water not working with dimming LED, power management, clicking from back   Henry O. • Temecula , CA • April 01, 2014

The indication was that when I tried to use the icemaker or water dispenser, the green LED on the front would dim and the ice maker dispenser wouldn't work. It was intermittent at first, but this indicated it may be a power management issue, in that insufficient voltage was getting to the ice dispenser motor. I unplugged the unit to reset the electronics for about a minute, and when I plugged it back it the compressor would try to turn on (solenoid or relay would click about every two... Read more

More
$304.30
Compare At:
$327.19
You Save:
$22.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Union Connector
Genuine Ge part
By: Ge
Part Number: WR02X11330

The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure. 

Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.

Symptoms of a bad Refrigerator Union Connector include:

  • Water leaks at or near the connector area 
  • Inconsistent or no water flow to the ice maker/dispenser
  • Fluctuations in water pressure to the fridge
  • Water damage to surrounding kitchen areas from leaks

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water leaking from under/behind fridge (two sources) three problems a comedy of errors   Joanne R. • Brookfield , WI • November 09, 2015

We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more

More
$9.80
Compare At:
$10.78
You Save:
$0.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Evaporator Fan Grommet
Genuine Ge part
By: Ge
Part Number: WR02X10098

The Evaporator Fan Grommet is an OEM part for GE refrigerators. This component serves as a cushion and stabilizer for the evaporator fan motor, reducing vibrations and noise while ensuring the fan operates smoothly. It helps to secure the fan motor in place, maintaining proper airflow and efficient cooling within the refrigerator.

Common causes of a bad grommet include wear and tear from constant use, damage from excessive vibrations, or degradation of the material over time.

Symptoms of a bad evaporator fan grommet include:

  • Increased noise or rattling sounds coming from the fan area
  • Vibrations felt within the refrigerator
  • The evaporator fan motor becoming loose or misaligned
  • Reduced cooling efficiency due to improper fan operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Freezer section too warm
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Fan was making noises.   Mark M. • Easton , PA • May 15, 2023

My refrigerator's cooling fan was making a noise. It wasn't loud; in fact, it was barely discernible. However, it was just loud enough to annoy me. The fan blade was hitting the shroud every now and then, creating a subtle, yet annoying sound. I'd tried tightening all the screws back there, and it helped-for a while. The noise came back. After looking at the fan motor, I noticed the bushings; it occurred to me that they might be the culprit. And why not? They were the originals installed at the... Read more

More
$7.37
Compare At:
$8.36
You Save:
$0.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Run Capacitor
Genuine Ge part
By: Ge
Part Number: WR55X24064

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

  • The refrigerator compressor fails to start.
  • Unusual humming noises coming from the refrigerator.
  • The refrigerator cycles on and off more frequently than normal.
  • A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Would not run led dimmed condenser fan would not run   Pete M. • Santa Fe , NM • May 16, 2015

We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from... Read more

More
$50.95
Compare At:
$60.12
You Save:
$9.17

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Module Shelf Insert
Genuine Ge part
By: Ge
Part Number: WR71X10764

The Module Shelf Insert is an OEM part for GE refrigerators. It's designed to enhance the versatility and organization within your fridge by providing an additional layer of storage on existing shelves. This insert allows for the separation of items, making it easier to organize and access your refrigerated goods. 

Causes for a Module Shelf Insert to become problematic can stem from overloading it with heavy items, accidental damage from moving items in and out of the fridge, or the natural wear and tear that comes with regular use. 

Symptoms of a bad Module Shelf Insert include:

  • Difficulty fitting or staying in place on the refrigerator shelf.
  • Cracks or damage that compromise its ability to hold items securely.
  • Warping that prevents it from sitting flat or properly dividing the shelf space.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Lots of broken pieces!   Nancy H. • Pittsburgh , PA • March 16, 2015

Replaced two drawers, one shelf front, and the grille base Read more

More
$31.95
Compare At:
$38.34
You Save:
$6.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dispenser Switch
Genuine Ge part
By: Ge
Part Number: WR23X10783

The Dispenser Switch is an OEM replacement part for GE refrigerators. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use.

Over time, the dispenser switch can wear out or become damaged due to frequent use, exposure to moisture, or electrical issues. This can result in the switch failing to activate the dispenser properly, impacting the performance of the refrigerator's dispensing system.

Symptoms of a bad dispenser switch include:

  • The water or ice dispenser not responding when the lever or button is pressed
  • Intermittent or inconsistent dispensing of water or ice
  • The dispenser working only occasionally or requiring excessive pressure to activate
  • No audible click or feedback when pressing the dispenser lever or button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Bad water dispenser micro switch on my ge fridge   James G. • Melbourne , FL • November 23, 2014

After disconnecting power to the fridge, I first removed the ice maker/water dispenser/fridge control faceplate. This easily popped out using a flat head screw driver. Then disconnected the 3 wire harness connections to the control board. I next removed the plastic dispenser housing shield. There's only 4 screws that hold this on. Finally, I removed the Micro-switch, disconnected the two wire connectors and installed the replacement switch and reinstalled everything. The repair took only... Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store