Vgrt360-4Gss Parts

This spark module controls ignition for the surface burners on gas cooktops and ranges. When a knob is turned, it generates the high-voltage spark needed to light the gas, restoring fast, consistent burner ignition across four positions.

• Generates high-voltage pulses to ignite up to four surface burners
• Activates when a burner switch is turned to provide reliable sparking to the igniters
• Common symptoms include no spark on any surface burner
• Intermittent or weak sparking across multiple burners
• Burners only lighting with an external flame

• Disconnect electrical power and shut off gas before servicing
• Photograph or label all wire positions; move wires to the new module one at a time to avoid miswiring
• Mount the module securely in the original location; keep leads dry and routed away from heat/sharp edges
• High-voltage hazard: do not touch igniter outputs during testing; verify all connections are fully seated before restoring power

This burner igniter is the surface spark electrode that lights a gas burner on your range. Replacing a worn or cracked electrode restores dependable ignition so burners light promptly when you turn the knob.

• Produces a high-voltage spark at the burner head to ignite the gas
• Activates when a burner knob is turned; interfaces with the unit's spark ignition system
• A cracked insulator or worn tip can result in weak or no spark
• Symptoms may include clicking without lighting, intermittent ignition, or needing a match to light

• Disconnect electrical power and shut off gas before servicing
• Remove grates, caps, and the burner head as needed to access the electrode
• Transfer any mounting hardware from the old electrode; position the tip at the same gap and orientation as original
• Route and connect the lead to the correct terminal; keep wiring clear of heat and sharp edges, then test for spark before reassembly

A flat hot-surface ignitor that replaces a worn oven ignitor to restore reliable burner ignition. Heats to ignition temperature so gas burners can light more consistently and help the oven reach operating temperature. What it does:

• Heats to a high temperature to ignite the oven or range gas burner
• Common failure symptoms: oven won't light, long ignition delay, or intermittent ignition
• Direct replacement for flat-style hot-surface ignitors used in compatible gas ovens and ranges
• Matches electrical connector and mounting style of the original flat ignitor design

• Always shut off electrical power and the gas supply before starting repair
• Handle the ceramic element carefully — it is fragile; avoid touching the element surface with bare hands
• Verify connector/wire compatibility and use the original mounting hardware or manufacturer-recommended fasteners

This pressure regulator controls incoming natural gas pressure to the appliance, helping maintain steady burner performance and proper combustion. It replaces a worn or faulty regulator to restore correct gas flow and consistent heat. What it does:

• Regulates downstream natural gas pressure for safe, consistent burner operation
• Can correct symptoms such as weak or uneven flames, difficulty maintaining a flame, or a burner that won't light reliably
• Works with the appliance's gas valve and manifold to balance fuel delivery to burners
• Designed to meet OEM fit and function for compatible Viking gas ranges

• Turn off gas supply and electricity before starting any repair
• After installation, perform a proper gas leak test and check for correct burner operation
• Do not modify the part; use the OEM-specified regulator for safe operation

The Burner Cap is an OEM part for Viking ranges. It sits atop the burner head, distributing the flame evenly for optimal cooking performance and protecting the burner head from spills and debris.

Causes of a bad burner cap can include prolonged exposure to high heat, accidental impact from cookware, or buildup of food residues and grease.

Symptoms of a bad Burner Cap include:

• Uneven flame distribution or yellow flames
• Difficulty in igniting the burner
• Visible cracks, chips, or warping on the cap
• Persistent odors or smoke from burnt residues

This OEM Viking part ensures your range maintains its high cooking efficiency and safety.

Thermostat for the griddle and bake surface that regulates cooking temperature to restore consistent heat. Replacing a faulty thermostat can stop under-heating, overheating or irregular temperature cycling so food cooks evenly. What it does:

• Senses and regulates griddle/bake temperature by switching heater circuits to maintain the set heat level.
• Stops symptoms like a griddle or bake surface that won't reach temperature, runs too hot, or cycles on and off erratically.
• Helps restore predictable cooking performance and prevents unevenly cooked food.
• Works as the temperature control element for the griddle/bake function on compatible ranges.

• Disconnect power to the appliance before starting work and allow all surfaces to cool.
• Compare new part to the old thermostat and follow the appliance wiring diagram for correct connections.
• Use proper tools and fasteners; secure mounting so the sensor/shaft is positioned as originally installed.
• After installation, restore power and verify proper temperature control and safe operation.

This panel-mounted indicator light signals oven operation. Replace it to restore clear status feedback when the original lamp fails, stays on, flickers, or is damaged.

• Illuminates on the control panel to indicate the oven is heating or in use
• Common replacement signs: light does not turn on, remains lit when oven is off, flickers/intermittent, or physical damage
• Restores visible status confirmation during preheat, bake, or broil
• Indicator only; it does not control oven temperature or heating

• Disconnect power at the breaker before servicing
• Access the rear of the control panel to remove the old indicator
• Note wire locations; transfer the leads to the new light and seat it fully
• Restore power and test operation before reassembly

This black griddle control knob replaces a worn, broken, or missing control on compatible Viking griddles and ranges, restoring reliable manual temperature selection and a finished look. Easy-to-swap for a quick cosmetic and functional repair. What it does

• Fits onto the griddle control valve stem to allow safe, tactile adjustment of heat settings.
• Replaces cracked, stripped, or missing knobs that prevent proper control or accurate setting selection.
• Restores a secure grip and visible setting indicator for repeatable temperature control.
• Helps eliminate intermittent contact or slipping caused by damaged knobs.

• One black griddle control knob

• Turn burners/griddle off and allow unit to cool before replacing the knob.
• Pull the old knob straight off the valve stem; align the new knob's splines and push on until fully seated.
• Do not force or hammer the knob; if it does not fit, verify correct part number and valve stem orientation.

Orifice hood (#57) is the burner component that centers and protects the burner orifice, helping deliver a steady, correctly-shaped gas flame for even cooking. Replacing a damaged hood restores reliable burner operation and flame control. What it does:

• Positions and shields the burner orifice to ensure correct gas flow to the burner.
• Helps maintain proper flame shape for even heat distribution across the burner.
• Can cause uneven or weak flames, delayed ignition, or irregular heating when damaged or corroded.
• Use as a direct replacement when the existing hood is bent, cracked, or excessively worn.

• Shut off the appliance power and gas supply before attempting any service.
• Replace only when the burner is cool; do not force or over-tighten parts.
• Inspect the burner head and orifice for damage or debris when installing this hood.

This grease pan captures and channels cooking drips and lubrication away from the range cavity to help keep the oven and cooktop area cleaner and protect internal components from buildup. Designed as the later production replacement for earlier pans. What it does:

• Collects grease, drips and food particles under the cooktop to prevent buildup in the range cavity
• Directs liquid to a safe collection area for easier cleanup and reduced fire risk from pooling grease
• Restores a proper drain/collection path when a damaged or missing pan causes leaks or odors
• Fits later-production Viking ranges using the "after 12/6/9" pan configuration

• One grease pan

• Install by removing the cooktop or access panel per your model's service instructions; verify orientation before tightening
• Use basic hand tools; ensure the range is powered off and cool before starting work
• Inspect surrounding seals and fasteners and replace any that are damaged to prevent leaks

This top burner front is a direct-fit replacement panel that restores the cooktop's front burner area for proper fit and appearance. It helps secure burner components and keeps the cook surface aligned and stable. What it does:

• Replaces a cracked, warped, dented or discolored top burner front panel
• Restores correct fit and support for front burners and grate alignment
• Helps prevent loose or misaligned burners that can affect cooking performance
• Improves appearance by replacing damaged or worn front trim

• Turn off power and gas to the appliance before servicing; follow all safety precautions
• Basic hand tools required; part installs from the top of the cooktop or under the cooktop depending on model
• Handle edges carefully to avoid cuts; check alignment and secure fasteners evenly

This is a replacement black top grill knob that restores control and precise setting of the cooktop grill/broiler control. It gives a like-new feel when a knob is cracked, loose, burned, or missing. What it does

• Replaces a worn, cracked, melted, or missing top grill control knob.
• Provides secure grip and accurate control of the grill/broiler setting.
• Helps eliminate slipping or difficulty turning the control.
• Restores proper user interface for safe, reliable operation.

• One black top grill knob.

• Turn off the appliance and allow all surfaces to cool before replacing the knob.
• If the range uses gas or is hardwired, shut off the gas and/or disconnect power at the breaker before servicing.
• Most control knobs pull straight off the valve stem; align and push the new knob onto the stem until fully seated.