Wfvc540suc/29 Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, ensuring the right amount of cold water is provided.

Causes of a faulty cold water inlet valve can include wear and tear over time, clogs or blockages in the valve, electrical issues, or valve failure.

Symptoms of a bad cold water inlet valve may include:

• Insufficient or no cold water flow into the washing machine
• Leaking or dripping water from the valve during the wash cycle
• Inconsistent or inadequate water supply for washing clothes
• Error codes related to water supply or filling

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: For the Hot Water Valve, order part number 00422245.

The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise moment to allow the correct amount of hot water to mix with the cold, ensuring the selected temperature setting is accurately achieved. 

The causes behind issues with the hot water inlet valve often include sediment build-up from hard water, wear and tear from regular use, or electrical failures preventing the valve from operating.  

Symptoms of a malfunctioning Hot Water Inlet Valve include:

• Water that is too cold 
• No water entering the machine 
• Leaks around the valve area 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Clamp is an OEM component specifically designed for select Bosch front-loading washers. As an adjustable mechanism, it secures tub components within acceptable alignments throughout spin cycles.  

Symptoms signaling the need for a new clamp include:

• Increased vibrations from tub or suspension movements exceeding specifications
• Difficulty starting or uneven spin balance detections by diagnostics sensors  
• Loosened or missing fasteners releasing adjustments subject to shifts

Causes related to fatigue cracks developing over prolonged wash cycles equating to years of use. Submersion in cleaning chemicals may also embrittle synthetic portions more rapidly. 

This OEM Bosch replacement clamp is also compatible with Thermador, Gaggenau, and some Kenmore washers.

The Boot Gasket is an OEM part for Bosch front-loading washing machines.

Causes of a faulty boot gasket can include cracks or tears developing from years of door openings and closings. Mineral or soap film buildup over time can also compromise the seal.

Symptoms of a problematic boot gasket include:

• Puddles or leaks found on the floor near the washer
• Moisture inside surrounding cabinetry

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Lock Latch is an OEM part for Bosch washers. This part is responsible for securing the washer door during operation, ensuring safety during washing cycles. It prevents the door from opening accidentally and interrupting the wash cycle.

A bad door lock latch can occur due to wear and tear, mechanical failure, or electrical malfunctions. Signs of a faulty latch include the door not locking or staying closed, error codes related to the door lock system, or the washer not starting or completing cycles.

Symptoms of a bad door lock latch include:

• The door not locking or staying closed  
• The washer not starting or completing cycles

Replace your malfunctioning or damaged door lock latch with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Hot Water Inlet Hose is an OEM replacement part for Bosch washers. It serves as a flexible supply line that delivers hot water from an external water heating hot water heater directly to the washer. This hose plays a key role in optimizing wash performance through consistent delivery of hot water for optimal cleaning and sanitization. 

Causes of a bad hot water inlet hose can include wear and tear over time, repetitive flexing weakening the hose material, mineral buildup restricting flow, or damage due to sharp edges or crushing forces.

Symptoms of a bad hot water inlet hose include: 

• Loss or reduction of hot water during wash cycles
• Decreased cleaning ability from insufficient water heating 
• Visible kinks, cracks, or splits along the hose body
• Leaks or drips at hose connections under the washer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Clamp is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad clamp can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad clamp include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged clamp with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Outer Tub Seal is an OEM part for Bosch washing machines. This part ensures a watertight seal between the outer tub halves, preventing water leaks during the washing cycle.

Causes for the replacement of the Outer Tub Seal can range from natural wear and tear due to age and frequent usage, to hard water conditions that can degrade the seal material over time. 

Symptoms of a failing Outer Tub Seal include:

• Water leaking from the bottom of the washing machine.
• Unusual noises during the spin cycle, which may indicate water has leaked into the bearings.
• Signs of water damage or rust near the base of the machine.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Tub Seal is an OEM part for Bosch washing machines. This part prevents water from leaking from the rear part of the drum where it connects to the machine's other components. This seal is specifically engineered to handle the rigorous environment of a washing machine, dealing with constant exposure to water, high spin speeds, and fluctuations in temperature. 

Causes of deterioration in a tub seal include aging and wear over time, chemical damage from detergents, and physical stress from unbalanced loads or excessive spin speeds. 

Symptoms of a bad Tub Seal include:

• Water leaking from the back of the washer, especially during or after the spin cycle
• Unusual noises such as grinding or squeaking, which may indicate that water has seeped into bearings or other components
• An increase in humidity or wetness around and behind the machine
• Rust or corrosion on nearby metal parts, suggesting prolonged exposure to leaking water

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.

A bad drive motor can occur due to electrical faults, mechanical issues, or normal wear and tear over time. Signs of a faulty drive motor include the drum not spinning or agitating, unusual noises coming from the motor, or the washer not starting at all.

Symptoms of a bad drive motor include:

• The drum not spinning or agitating  
• Unusual noises
• The washer not starting  

Replace your faulty washer drive motor with this genuine OEM Bosch part to restore your washing machine. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

This replacement screw secures appliance panels, brackets, and internal components so your unit stays assembled, aligned, and quiet. Replace stripped, missing, or corroded screws to restore a tight fit and help prevent vibration or leaks.

• Fastens panels, trim, brackets, or internal parts in their correct position
• Helps maintain alignment and sealing to reduce noise and potential leaks
• Replaces worn, stripped, rusted, or lost hardware
• Common symptoms: loose or rattling panel/handle, misaligned parts, components shifting

• Disconnect power and, if applicable, shut off water before servicing
• Match the head/size to the original hardware; do not mix lengths across locations
• Start threads by hand to avoid cross-threading; tighten snugly without over-torque
• For plastic or thin sheet metal, avoid overtightening to prevent stripping or cracking

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.