Wpgt9350copl Parts

The Inlet Valve Assembly is an OEM part for GE washing machines. This part controls the flow of water into the washer during the fill and rinse cycles.  

Causes of a bad inlet valve can include regular wear and tear, mineral deposits from hard water, or electrical issues.  

Symptoms of a bad inlet valve assembly include:

• The washer not filling with water or filling too slowly
• Water leaking from the valve area
• The washer filling with water when it is not supposed to
• Inconsistent water levels during cycles

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This washer drain hose carries used water from the tub to your home drain. Replacing a cracked, clogged, or kinked hose helps restore proper draining and prevents leaks during the drain/spin portion of the cycle.

• Routes wastewater from the washer to the household standpipe or laundry sink
• Damage or blockage can cause leaks, slow or no draining, or water on the floor
• Replace if you see cracks, splits, bulges, or persistent leaking at the back of the washer
• A pinched or flattened hose can also lead to standing water after a cycle

• Unplug the washer and turn off water; place towels or a pan to catch residual water
• Note the routing; loosen clamps and remove the old hose from the washer outlet and drain connection
• Install the new hose and secure with clamps; avoid kinks or sharp bends
• Verify correct drain height/air gap to prevent siphoning, then run a drain/spin to check for leaks

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

This is a replacement mounting screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. Use it to replace a missing or damaged fastener for a secure repair. What it does:

• Secures panels, trim, brackets, or small components in place
• Restores proper panel alignment and reduces rattling or vibration
• Replaces stripped, missing, or corroded screws that cause loose parts
• Helps maintain electrical and mechanical connections by holding parts steady

• Turn power off and unplug the appliance before beginning any repair
• Use the matching driver or bit to avoid stripping the screw head
• Replace only with the same type and size screw for a proper fit
• Inspect surrounding parts for wear

This thermistor assembly senses appliance temperature and sends readings to the control board so the unit can regulate cooling. Replaces a failed or intermittent sensor to restore accurate temperature monitoring. What it does:

• Measures internal temperature and provides variable resistance feedback to the control board.
• Helps the control system maintain desired cooling by reporting temperature changes.
• A faulty thermistor can cause temperature fluctuations, poor cooling, or incorrect temperature readouts.
• Can clear temperature-related error codes when replaced as directed by diagnostics.

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle the sensor and wiring gently; avoid pulling on wires or connectors.
• Install in the original sensor location and route wiring as OEM to prevent interference or damage.

This top lid trim restores the finished edge around the washer lid for a clean look and smooth operation. It replaces damaged or worn trim so the lid closes cleanly and reduces snagging. What it does:

• Replaces cracked, chipped, or broken lid edging that can catch clothing
• Helps maintain proper lid alignment and smooth opening/closing
• Prevents rough edges that can cause user discomfort or fabric snags
• Restores original appearance after cosmetic damage

• One lid trim piece (color: white)

• Remove power and water connections to the appliance before beginning any repair
• Access typically requires lifting or removing the washer lid—support the lid to prevent it from falling
• Use appropriate hand tools and avoid force to prevent cracking the trim or lid

This is a replacement washer used with appliance fasteners to secure and space components for stable operation. Installing a correct washer helps maintain proper fit and reduces wear at connection points. What it does:

• Provides a stable bearing surface between a fastener and the mounted part
• Helps maintain correct gap/spacing for aligned components
• Reduces wear and prevents metal-on-metal contact at the joint
• Can stop loosening that causes vibration or rattling near fastened panels

• Disconnect power and water before accessing internal components.
• Use the correct matching fastener and size; do not substitute an incorrect diameter or thickness.
• Hand-start fasteners to avoid cross-threading, then torque to manufacturer specs; avoid overtightening.
• If multiple washers or fasteners show wear, replace all affected hardware for best results.

This suspension assembly stabilizes and supports the washer tub, absorbing movement during wash and spin. Replacing a worn suspension can reduce vibration and banging, helping restore smooth, balanced operation and quieter performance. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens vibration, sway, and rocking during spin
• Helps prevent thumping, "walking," and off-balance interruptions
• Common symptoms of failure include excessive shaking, banging noises, frequent off-balance stops, or a tub that leans/sits low

• 1 suspension assembly

• Disconnect power and turn off water supply before servicing
• Wear gloves; components may be under spring tension—support the tub when removing the old assembly
• Access location varies by model; follow your model's service/diagram guidance
• After installation, level the washer and run a test spin to verify balance

This door release cable connects the dryer door latch to the release mechanism so the door opens and closes reliably. Replaces a worn or broken cable to restore normal door operation and improve safety. What it does:

• Transfers motion from the door handle to the latch so the door can be opened and closed
• Helps ensure the door stays securely closed during operation
• Commonly replaced when the door won't latch or handle feels loose
• Prevents intermittent door-release failures that can stop dryer cycles

• Disconnect power before beginning any repair to avoid shock or injury
• Inspect the latch, handle, and routing path and replace any damaged clips or fasteners
• Basic hand tools typically required; follow OEM instructions for routing and attachment

This motor assembly with integrated clutch replaces the dryer's drive motor to restore drum rotation and normal tumbling. It's the direct-fit drive unit used to move the dryer drum and enable reliable drying performance. What it does:

• Turns the dryer drum so clothes tumble and dry evenly.
• Clutch helps control drum start/stop and prevents backward spinning.
• Commonly replaces a worn motor or failed clutch causing no tumbling.
• Stops grinding or squealing noises if the clutch or motor bearings are failing.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Wear gloves and eye protection; follow the dryer service manual for disassembly steps.
• Reinstall drum belt and alignment per factory instructions; mounting hardware is secure.
• After installation, test with a short cycle to ensure proper drum rotation and noise-free operation.