Parts for Lg DLE3300W: Section 2 Parts

The main PCB assembly is an OEM part for LG dryers. As the central control unit, this main control board is responsible for managing and regulating the various functions and cycles of the dryer.

A bad main control board can occur due to electrical issues, component failure, or other internal malfunctions. If you notice symptoms such as the dryer not starting or powering on, cycles not advancing, or error codes displaying on the control panel, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Dryer not starting or powering on
• Cycles not advancing
• Error codes displaying on the control panel

Restore the function of your LG dryer by replacing the faulty main control board with this genuine OEM part.

This LG replacement part is also compatible with Sears/Kenmore models.
 

Replacement cabinet cover assembly for your dryer. Restores the outer casing when the original is cracked, dented, or damaged. Essential structural part.

If your dryer door pops open during cycles or won't stay closed, this door latch assembly restores a secure closure. Easy 5-minute DIY repair.

Replace missing or stripped taptite screws that secure panels and internal components. This thread-forming screw creates a tight hold to eliminate rattles.

Complete dryer door assembly replaces cracked, dented, or damaged front doors. Restores secure seal and appearance. Verify model compatibility before ordering.

The Door Hinge is an OEM part for LG dryers. This hinge supports the dryer door, allowing it to open and close smoothly and securely. It ensures that the door stays aligned and functions properly, providing reliable access to the dryer drum for loading and unloading clothes.

Causes of a bad door hinge can include frequent use leading to wear and tear, physical damage from forceful opening or closing, and rust or corrosion due to exposure to moisture.

Symptoms of a bad door hinge include:

• Difficulty in opening or closing the dryer door
• The door not staying aligned or becoming loose
• Squeaking or grinding noises when moving the door
• Visible damage, bending, or rust on the hinge

This OEM LG part is also compatible with some Kenmore models.

This inner door frame secures and finishes the appliance door's interior, restoring proper fit and appearance. Replaces a cracked, warped or damaged inner frame to help the door close evenly and maintain the door assembly's integrity. What it does:

• Provides structural support for the door assembly and holds inner components in place
• Restores correct door fit and alignment when the existing inner frame is damaged
• Improves seal/contact between door layers to reduce rattling or uneven closure
• Returns a finished interior look when the original frame is cracked, broken, or cosmetically damaged

• One inner door frame

• Disconnect power to the appliance before beginning any disassembly
• Handle glass and trim pieces carefully to avoid breakage or injury
• This part typically installs from the inside of the door and is secured with screws; keep track of fasteners and any small trim clips

The Door Seal is an OEM part for LG dryers. It forms a tight seal around the dryer door, preventing heat and moisture from escaping during the drying cycle, which ensures efficient drying and energy use.

Causes of a bad door seal can include wear and tear from regular use, damage from repeated opening and closing of the dryer door, or degradation from exposure to heat and moisture over time. A compromised door seal can lead to longer drying times and increased energy consumption.

Symptoms of a bad door seal include:

• Heat and moisture escaping from the dryer door
• Longer drying times
• Clothes not drying completely
• Visible cracks, tears, or wear on the seal

This OEM LG part is also compatible with Sears/Kenmore.

This small damper mounts near the dryer door hinge and cushions the door's movement to prevent it from slamming or bouncing when opened or closed. It absorbs impact and reduces stress on the hinge mechanism. Replace this part if the dryer door slams shut forcefully, swings freely without resistance, or if the existing damper is cracked or missing.

This adjustable leveling leg screws into the dryer base to support and stabilize the cabinet. Replacing a worn or missing foot helps level the appliance, reduce vibration and noise, and keep it steady on uneven floors.

• Provides threaded height adjustment to properly level the dryer
• Stabilizes the cabinet to minimize rocking, vibration, and walking
• Replaces a broken, worn, or missing foot
• Common symptoms: dryer wobbles, is hard to level, or makes rattling/vibration noise

• Disconnect power; shut off gas supply for gas models
• With a helper, carefully tilt or raise the dryer for access
• Unscrew the old leg; thread the new leg into the base by hand, then adjust with a wrench until the dryer sits level and stable
• Ensure all legs contact the floor and the dryer does not rock

Hardware screws and nuts for installing a dryer side vent kit. Replace missing or stripped fasteners when reconfiguring exhaust outlet direction.

Stationary rack that installs inside your dryer drum to hold shoes, sweaters, and delicates that shouldn't tumble. Replace if cracked, broken, or missing.

This side venting kit allows you to redirect your dryer's exhaust air out through a side wall instead of the back of the unit. It includes the necessary ductwork and connections to safely route hot, moist air outside your home. Use this kit when your dryer installation requires side venting due to space constraints or structural limitations.