Parts for Ge TB15SPFLWH: 03 - Section3 Parts

Package of 12

This power cord clamp secures the appliance power cord where it passes through the cabinet, preventing the cord from pulling loose and protecting wiring from abrasion. It helps maintain a reliable electrical connection and reduces wear. What it does:

• Holds the power cord firmly at the chassis entry point to prevent tugging or accidental disconnection
• Protects cord insulation from sharp edges to reduce chafing and electrical shorts
• Helps maintain proper cord routing for safe, code-compliant installation
• Commonly replaced when the clamp is cracked, missing, or no longer secures the cord

• One power cord clamp

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect surrounding wiring and cabinet opening for damage; replace any worn wiring or sharp metal edges
• Install clamp so the cord cannot be pulled through; ensure fasteners are secure but not over-torqued

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

The Start Relay is an OEM part for GE refrigerators. It helps initiate the compressor by providing a temporary boost of power to start the cooling process.

Causes of a bad start relay can include electrical failures, overheating, or general wear and tear.  

Symptoms of a bad start relay include:

• The compressor failing to start
• The refrigerator not cooling properly
• Clicking noises coming from the compressor area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.