Parts for Lg LMH1017CVST / AS1ELGA: Section 3 Parts

A sheet-metal tapping screw used to fasten appliance panels and components where a self-threading fastener is needed. Replaces stripped or missing screws to restore secure fits and reduce rattling or loose trim. What it does

• Threads into thin metal or plastic mounting points to secure panels, brackets, and trim
• Commonly used where pre-formed threads are not available
• Helps stop vibrating or loose panels that cause noise or alignment issues
• Designed to grab and form threads as it's driven in for a tight hold

• Tapping screw

• Use the correct screwdriver bit to avoid cam-out or head damage
• Start straight and drive slowly until snug; avoid over-tightening which can strip or crack mounting material
• Disconnect power and remove nearby wiring or components as needed for safe access
• Wear eye protection when working with small fasteners and metal panels

The Turntable Coupler is an OEM part for LG microwaves. This coupler connects the motor to the turntable, enabling the rotation of the glass tray during the cooking process. 

Causes of a bad turntable coupler can include wear and tear from regular use, cracks or breaks due to the weight of heavy dishes, or damage from accidental impact. 

Symptoms of a bad turntable coupler include:

• The glass tray not rotating during operation
• Uneven heating or cooking of food
• Unusual noises from the turntable area
• Visible damage or wear on the coupler

This OEM LG part is also compatible with some Kenmore models.

This turntable roller ring sits beneath the glass tray and provides a smooth rolling track so the tray rotates consistently during cooking. Replacing a worn or cracked ring restores steady rotation for even heating and quieter operation.

• Supports the glass turntable and allows it to roll around the center drive
• Helps maintain smooth, level rotation for uniform cooking results
• Wear or damage can cause the tray to stop turning, bind, wobble, or make grinding noises
• Visible cracks, flat spots, or missing/damaged rollers indicate the ring should be replaced

• Disconnect power to the microwave before servicing
• Open the door, remove the glass tray, and lift out the old ring; clean the track area
• Place the new ring in the track with rollers facing down; reinstall the tray on the coupler
• Run a brief test cycle to ensure smooth, stable rotation

A direct-replacement circulating motor that moves air inside the refrigerator cabinet to help maintain even temperatures and consistent cooling. Replacing a worn motor restores airflow and can reduce warm spots and uneven cooling. What it does:

• Drives internal airflow to distribute cold air between compartments for more uniform temperatures.
• Restores circulation when a failed motor causes weak or no airflow.
• Common, safe-to-report symptoms: uneven cooling, warm spots in the fridge, the appliance running more than usual, or unusual humming/noise from the cabinet.
• Works with the appliance's wiring harness and mounting system to deliver continuous air movement while the cooling system runs.

• Always unplug the appliance before beginning service to avoid electric shock.
• Handle the motor and fan blades carefully to avoid bending or damage; keep fingers and tools clear of blades.
• Confirm correct connector orientation and secure mounting to prevent vibration or rubbing.
• After installing, power up briefly to verify the motor runs and the fan spins freely before reassembling panels.

A direct-replacement circulating motor that moves air inside the refrigerator cabinet to help maintain even temperatures and consistent cooling. Replacing a worn motor restores airflow and can reduce warm spots and uneven cooling. What it does:

• Drives internal airflow to distribute cold air between compartments for more uniform temperatures.
• Restores circulation when a failed motor causes weak or no airflow.
• Common, safe-to-report symptoms: uneven cooling, warm spots in the fridge, the appliance running more than usual, or unusual humming/noise from the cabinet.
• Works with the appliance's wiring harness and mounting system to deliver continuous air movement while the cooling system runs.

• Always unplug the appliance before beginning service to avoid electric shock.
• Handle the motor and fan blades carefully to avoid bending or damage; keep fingers and tools clear of blades.
• Confirm correct connector orientation and secure mounting to prevent vibration or rubbing.
• After installing, power up briefly to verify the motor runs and the fan spins freely before reassembling panels.

A direct-replacement circulating motor that moves air inside the refrigerator cabinet to help maintain even temperatures and consistent cooling. Replacing a worn motor restores airflow and can reduce warm spots and uneven cooling. What it does:

• Drives internal airflow to distribute cold air between compartments for more uniform temperatures.
• Restores circulation when a failed motor causes weak or no airflow.
• Common, safe-to-report symptoms: uneven cooling, warm spots in the fridge, the appliance running more than usual, or unusual humming/noise from the cabinet.
• Works with the appliance's wiring harness and mounting system to deliver continuous air movement while the cooling system runs.

• Always unplug the appliance before beginning service to avoid electric shock.
• Handle the motor and fan blades carefully to avoid bending or damage; keep fingers and tools clear of blades.
• Confirm correct connector orientation and secure mounting to prevent vibration or rubbing.
• After installing, power up briefly to verify the motor runs and the fan spins freely before reassembling panels.