Parts for Lg WT7600HVA: Section 3 Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.

Fix excessive shaking and banging noises during spin cycle. This suspension assembly supports and stabilizes the wash tub, reducing vibration.

Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.

This clutch housing assembly supports the clutch coupling in the washer's drive system, aligning and securing moving components that shift between wash and spin. Replacing a worn housing restores smooth engagement and consistent agitation and spin performance. What it does:

• Houses and supports the clutch coupling that engages the basket for wash and spin cycles
• Maintains alignment of drive components to help prevent slippage and noise
• Helps transfer motor power to the wash plate/basket through the clutch mechanism
• Common symptoms of a failing part: no or intermittent spin, weak/no agitation, grinding or scraping noises from the bottom of the washer

• One clutch housing assembly

• Disconnect power and water; turn off supply valves before servicing
• Access is typically from the bottom—tilt or lay the washer carefully and support it securely
• Remove rotor/stator and clutch components as needed to reach the housing; note fastener locations and wiring
• After reassembly, rotate the drive by hand to check for binding and run a test cycle to verify agitation and spin

Fix LE error code or washer won't spin issues with this stator assembly. Common repair for motor lock problems. DIY-friendly, typically installed in 30 minutes.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.