Parts for Lg LFC23760ST / ASTCLGA: Section 4 Parts

Replacement screw for refrigerators. Secures panels, brackets, and internal components. Install when original is missing, stripped, or damaged.

Complete freezer door assembly for your refrigerator. Includes door panel and frame. Replace if your original door is cracked, damaged, or warped.

Freezer door gasket creates an airtight seal to prevent warm air entry and maintain consistent temperature. Replace if torn, cracked, or loose. Verify fit by model number before ordering.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Plastic mullion cover that conceals the divider between fresh food and freezer sections. Replace when cracked, discolored, or broken for a clean look.

Exterior access panel cover for refrigerators. Protects internal components and restores finished appearance. Replace if cracked, broken, or missing.

The Gasket Holder is an OEM replacement part for LG refrigerators. It is a mount located around refrigerator doors that secures the gaskets in their tracks. About 37.5" long

Potential failure causes relate to consistent flexing and impact stresses warping holder material over many years. Mineral buildup inhibiting a flush seal is also possible.

Symptoms involve:

• Cold air infiltration from gaps where gaskets no longer fit tightly
• Condensation or frost accumulated on external door panels
• Ice buildup inside due to insufficient insulation performance
• Gaskets detaching from holder tracks rendering them useless

This OEM LG part is also compatible with some Sears/Kenmore models.

The Holder Gasket is an OEM part for LG refrigerators. This gasket creates a tight seal between the holder and the refrigerator's interior, preventing air leaks and maintaining optimal cooling efficiency.

Common causes of a bad gasket include wear and tear over time, exposure to extreme temperatures, or accidental damage during maintenance or cleaning.

Symptoms of a bad gasket include:

• Air leaks leading to temperature fluctuations
• Increased energy consumption
• Frost or condensation buildup inside the refrigerator
•  Difficulty maintaining consistent temperatures

This OEM LG part is also compatible with Sears/Kenmore models.

The Gasket Holder is an OEM part for LG refrigerators. This part holds the door gasket in place, ensuring a tight seal around the refrigerator or freezer door. 

Over time, the gasket holder can become warped or damaged due to frequent use, temperature fluctuations, or accidental impacts. 

Symptoms of a bad Gasket Holder include:

• Loose or sagging door gasket
• Noticeable gaps between the gasket and the door frame
• Difficulty in maintaining consistent refrigerator temperatures
• Increased condensation or frost inside the appliance

This OEM LG part is also compatible with some Kenmore models.

The Gasket Holder is an OEM replacement part for LG refrigerators. It is inside the freezer door and functions to securely seal in cold air. The holder provides a mounting point and compression fit for the door gasket, preventing air leakage along the perimeter.  

Symptoms of a bad gasket holder include:

• Cold air escaping around the door seal 
• Frost or moisture buildup near the gasket area
• The door not shutting tightly 

Note: About 38.5" long

Over time, the holder's mounting points can warp or weaken from repeated opening and closing of the freezer door. This allows for gasket movement and compromised sealing.

This replacement is compatible with Sears/Kenmore models as well.

Replaces the left door closing cam on bottom-mount refrigerators. Installs inside the door to help ensure proper closing and sealing when broken or worn.

Replaces broken or worn door closing cam on bottom-mount refrigerators. Installs at lower hinge to control smooth door movement. Needed when cam cracks or breaks.

Replace your refrigerator's guide sleeve if cracked, broken, or missing. This component helps direct and protect moving parts during operation.

Replace your cracked, broken, or missing refrigerator door bin. Provides convenient storage for condiments, beverages, and snacks on the door.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replacement refrigerator door handle assembly. Installs on refrigerator door. Needed when original handle is cracked, broken, or damaged.

Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.

Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.

Replacement door shelf bar that secures items on refrigerator door shelves. Prevents bottles and containers from sliding or falling. Needed when cracked or missing.

Secures and transmits motion between drawer drive and slide assembly. Replace if broken, cracked, or missing to restore smooth drawer operation and alignment.

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.

Replacement door hinge bushing for refrigerators. Installs in door hinge mechanism. Replace when worn, cracked, or causing door grinding or misalignment.