Parts for Poulan PPB300: Shaft / Shield / Handle Parts

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

Trimmer won't rev up or runs at constant speed? This throttle trigger controls engine speed and line rotation. Straightforward repair for most DIYers.

Secures components on your line trimmer. Replace if cracked, bent, or loose to prevent vibration and part damage. Verify fit with your model number.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Mounting screw for lawn equipment including blowers, trimmers, and hedge trimmers. Replaces broken, stripped, or missing screws that secure components.

Replace a bent or broken upper shaft causing poor performance or loss of power transfer. Compatible with gas and grass line trimmers and pruners.

Shield bracket secures the debris deflector to your trimmer shaft. Replace if cracked, broken, or missing to properly mount the shield and protect you.

Replace your line trimmer gearbox if the cutting head won't spin or makes grinding noises. Connects drive shaft to cutting head. Moderate DIY repair.

Replacement screw for line trimmers, edgers, chainsaws, and pruners. Replaces lost, damaged, or stripped screws in small engine assemblies. Sold individually.

Lower flex shaft for gas line trimmers. Transmits engine power to the cutting head. Replace if worn, damaged, or binding. Installs in the lower drive tube.

Carburetor adaptor mounting screw for trimmers and outdoor power equipment. Replace if stripped, missing, or damaged to secure carb adaptor properly.

Replacement D-handle nut for brush cutters and trimmers. Secures the D-handle to the shaft assembly. Replace if stripped, cracked, or missing.

If your trimmer line won't feed or the spool falls off, you likely need a new spool retainer. This part secures the spool in the hub assembly. Quick fix.

This is a dust cup assembly that fits around the drive shaft area of a line trimmer. It serves as a protective shield to keep dirt, grass clippings, and debris away from the drive shaft and internal components. Replace this part if it is cracked, missing, or no longer fitting securely, which can allow debris to damage internal trimmer components.

Replacement washer for line trimmers. Installs between components to provide spacing and secure fastening. Replace if cracked, worn, or missing.

Small metal washer that secures components in edgers and trimmers. Replace if worn, damaged, or missing to properly fasten screws and nuts in your equipment.

This is a left-hand threaded flange nut used to secure the blade or trimmer head on a lawn mower or outdoor power equipment. The built-in flange provides a wider bearing surface to distribute clamping force evenly. Replace this nut if it is stripped, corroded, or unable to hold the blade or attachment securely in place.

5/32 inch hex wrench tool for outdoor power equipment maintenance. Replace if lost, worn, or damaged. Essential for tightening hex socket bolts and screws.