Parts for Kitchenaid KFIS29BBMS00: 06 - Shelf Parts

This front pan is the front half of the outer tub assembly in a washing machine. It forms the watertight front section of the tub that houses and supports the spin basket and seals against the rear tub half.

• Forms the front portion of the outer tub to contain wash water
• Provides mounting and sealing surface for the door boot/bellow
• Supports the spin basket shaft and helps maintain proper alignment
• Wear or damage may cause leaks, rubbing noises, or vibration

• Disconnect power and water before service; use protective gloves
• Removal generally requires taking off the top, front panel, and door boot
• Transfer any seals, clamps, screws, and hardware from the original part
• Inspect and replace the tub gasket/door bellow if worn or damaged

Replace a cracked or broken refrigerator support bracket. This structural component mounts inside your fridge to secure shelves or components.

Plastic ladder support that holds door shelves in place on your refrigerator. Replace if cracked, broken, or missing to restore proper shelf mounting.

Replace your refrigerator's cracked, broken, or worn glass shelf. This clear storage shelf installs inside the fresh food compartment to organize food.

Fix frost buildup and temperature issues with this refrigerator defrost heater. Heats evaporator coils to prevent ice accumulation and maintain cooling.

Replacement crisper drawer for bottom-mount refrigerators. Restores organized storage for fruits and vegetables when original is cracked, broken, or missing.

Replace your cracked, broken, or missing refrigerator glass shelf. Restores usable storage space with a flat, easy-to-clean surface for organized food storage.

This pan front is the removable front panel for a refrigerator storage drawer. Replacing a cracked or missing front restores containment and gives a solid handhold so the drawer opens and closes smoothly.

• Forms the drawer's front wall and integrated pull
• Helps keep food from sliding out of the bin
• Common fix for cracked, broken, or missing drawer fronts
• Improve drawer alignment and closing after damage

• Safety first: Disconnect power before working inside the refrigerator
• Remove the drawer and place it on a flat surface
• Release retaining tabs or screws to remove the old front
• Align and snap/secure the new front; verify smooth operation before reinstalling

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Glass shelf that sits over the crisper drawer in your refrigerator. Replace if cracked, chipped, broken, or missing to restore storage space.

Secures and aligns the rear of your refrigerator crisper drawer for stable, smooth sliding. Replace if broken, cracked, or worn to restore proper fit.

Replace your cracked or broken refrigerator crisper drawer pan. This bin holds fresh produce in the lower compartment. Ideal for damaged drawers.

Replace your refrigerator's right pantry side plate if cracked, warped, or broken. Restores drawer seal and interior finish. Confirm fit with model number.

This replacement plate restores the original mounting/cover surface to help keep related components aligned and protected. It's a basic service part that replaces a worn, bent, or damaged plate to reduce fit and alignment problems. What it does:

• Provides the proper mounting or cover surface for the associated assembly
• Restores correct fit and alignment to reduce rattling, binding, or clearance issues
• Protects underlying components from direct contact or abrasion
• Helps maintain safe, stable operation when the original plate is damaged

• One replacement plate

• Disconnect power to the appliance before attempting any repair
• Use basic hand tools; support nearby parts to avoid damage during removal
• Handle carefully—edges may be sharp on metal plates

Mounting plate for refrigerators. Secures and supports internal components. Replace if cracked, warped, or broken to restore proper assembly and fit.

Mounting plate for refrigerator interior assembly. Secures components in place. Replace if cracked, bent, or broken to restore proper fit and alignment.

Decorative trim piece that restores the finished look of your refrigerator where trim has become cracked, chipped, or missing. Covers exposed edges or seams.

Direct-fit slide guide for refrigerator drawers and shelves. Restores smooth tracking and prevents binding. Replace if cracked, broken, or worn out.

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

Front support bracket that secures your refrigerator's crisper drawer for smooth sliding and proper alignment. Replace if cracked, broken, or missing.

Mounting screw secures panels, trim, and internal components to your refrigerator frame. Replace when original is missing, stripped, or damaged.

This sachet holder housing assembly secures single-use detergent or cleaning sachets inside the dispenser so they stay in place and release correctly during cycles. Replacing a cracked or broken holder restores reliable sachet positioning and dispensing. What it does:

• Holds detergent/cleaning sachets in the dispenser so they don't shift or drop into the tub.
• Ensures sachets stay aligned for proper release during the wash or cleaning cycle.
• Helps prevent sachets from rupturing or blocking the dispenser area.
• Common symptoms of a bad holder: sachets falling out, sachets not dispensing properly, or poor wash/cleaning results.

• Disconnect power (and water, if required) before servicing the dispenser area.
• Access the dispenser per the owner's manual; the holder typically snaps into place or secures with a small fastener.
• Handle plastic clips and tabs gently to avoid breakage; use a non-marring pry tool if needed.

Interior trim piece that covers the front edge of your refrigerator pantry drawer. Replace if cracked, broken, or worn to restore a finished appearance.

Replacement cover panel for your refrigerator. Installs on the interior or exterior to conceal wiring or components. Order if cracked or missing.

Fix a refrigerator that won't cool, has temperature issues, or displays error codes with this electronic control board. Moderate DIY repair in 1-2 hours.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

Replaces a cracked, broken, or missing access panel cover on your refrigerator. Restores exterior appearance and protects internal components.

Decorative trim piece that covers and finishes the edge around your refrigerator's control area. Replace if cracked, broken, or missing to restore appearance.

Mounting bracket that secures and stabilizes refrigerator assemblies. Replaces broken or missing brackets to restore proper panel alignment.