Parts for Whirlpool WRF989SDAB00: 06 - Shelf Parts

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.

The Heater is an OEM part for Whirlpool refrigerators. It is an essential temperature control component located inside the refrigerator compartment. The heater works to maintain consistent cool temperatures by heating evaporator coils and circulating airflow inside the fridge. 

Causes of a bad heater include failures in the heating element over time, moisture damage to electrical components, or loose connections to the power supply.  

Symptoms of a bad heater are:

• Fluctuating and unstable interior temperatures  
• Frost or ice buildup inside the refrigerator
• The refrigerator failing to consistently cool food properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: The pan does not come with the Axle WPW10257246 and Roller WPW10248544. Order quantity needed.

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tempered glass crisper shelf replaces a broken or missing refrigerator crisper shelf to restore stable storage for produce and deli items. It provides a flat, easy-to-clean surface that fits into crisper compartment supports. What it does:

• Replaces cracked, chipped or missing crisper shelf glass that can no longer support food
• Restores a level surface for drawers and stored items to prevent tipping or spills
• Provides an easy-to-clean barrier that helps contain drips and messes
• Maintains proper shelving layout so drawers and bins slide and sit correctly

• One tempered glass crisper shelf

• Remove all food and drawers from the crisper area before installing
• Handle glass carefully and wear gloves to avoid cuts; place glass into shelf supports and gently set until seated
• Do not force the glass into warped or damaged supports; inspect supports and replace if needed

This crisper cover is the glass/frame shelf that sits above the refrigerator crispers, providing a flat surface and helping maintain proper temperature and humidity for fresh produce. It restores shelf function and visibility inside the fridge. What it does:

• Replaces a cracked, chipped or missing crisper cover to restore a stable shelf over the vegetable drawers
• Helps keep cold air circulating evenly across the crisper area to protect produce
• Prevents items from falling into the crisper compartment and makes cleaning easier
• Matches original fit and mounting points for a proper, secure seating

• One crisper cover (29-inch)

• Remove food and drawers before installing; handle glass parts carefully to avoid breakage
• Lift into position and seat on the factory support rails; reinstall drawers and test for proper clearance
• If damaged hardware is present, replace fasteners or supports before seating the cover
• Disconnect power only if working near electrical components; this is a non-electrical part

This rear crisper drawer support secures and aligns the refrigerator crisper, keeping the drawer stable and allowing smooth sliding. Replace a worn or broken rear support to restore proper drawer fit and prevent sagging or misalignment. What it does:

• Holds the rear of the crisper drawer on its track so the drawer stays level during use
• Guides and stabilizes drawer movement to prevent sticking or uneven travel
• Prevents the crisper from tilting, falling, or binding when opening and closing
• Works with the existing front support and drawer components to maintain fit

• One rear crisper drawer support (quantity: 1)

• Remove food and the crisper drawer before replacing the support
• Most repairs are simple and require only basic hand tools; handle plastic parts gently to avoid damage
• Disconnect power to the appliance before servicing if you need to move or access electrical components

Note: The pan does not come with the Axle WPW10257246 and Roller WPW10248544. Order quantity needed.

This right-side pantry sideplate restores the interior trim on compatible refrigerators, keeping the pantry compartment sealed and looking finished. Durable replacement to help support door components and improve appearance. What it does:

• Replaces a cracked, warped, or missing right pantry sideplate
• Restores the interior trim that helps hold pantry shelves and seals in place
• Prevents edge damage and covers mounting points for a clean look
• Matches OEM fit for proper alignment and function

• Install with basic hand tools; align before tightening fasteners
• Handle carefully to avoid scratching finished surfaces
• Disconnect power only if work requires removing electrical components nearby
• If mounting hardware is damaged or missing, replace hardware separately

This replacement plate restores the original mounting/cover surface to help keep related components aligned and protected. It's a basic service part that replaces a worn, bent, or damaged plate to reduce fit and alignment problems. What it does:

• Provides the proper mounting or cover surface for the associated assembly
• Restores correct fit and alignment to reduce rattling, binding, or clearance issues
• Protects underlying components from direct contact or abrasion
• Helps maintain safe, stable operation when the original plate is damaged

• One replacement plate

• Disconnect power to the appliance before attempting any repair
• Use basic hand tools; support nearby parts to avoid damage during removal
• Handle carefully—edges may be sharp on metal plates

Right Hand

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

This trim piece restores the finished appearance of your appliance where trim has become cracked, chipped, or missing. It provides a clean, factory look while protecting the exposed edge or opening. What it does:

• Covers and protects an exposed edge or seam for a finished appearance
• Replaces cracked, warped, or otherwise damaged trim that affects looks
• Helps maintain the appliance's original styling and visual fit
• Simple, non-electrical part — no wiring or moving components

• Remove power to the appliance and follow the manufacturer's service instructions before starting.
• Installation typically requires basic hand tools and careful removal of old trim to avoid damaging surrounding surfaces.
• Keep mounting screws or clips from the original trim if re-using; replace only with manufacturer-specified fasteners.

Replacement housing assembly that secures internal components and restores structural support and alignment. Installs in the appliance to protect parts from debris and damage while helping reduce vibration and rattling caused by loose or broken housings. What it does:

• Provides a mounting surface and enclosure for internal components to keep them properly aligned.
• Protects parts from debris and accidental contact that can cause damage or electrical shorts.
• Helps reduce noise and vibration by stabilizing moving parts and maintaining correct clearances.
• A cracked or damaged housing can cause rattling, loose or misaligned components, and decreased performance.

• Disconnect power (and water/gas if applicable) before beginning any repair.
• Handle carefully; edges may be sharp. Use basic hand tools and keep fasteners organized.
• Follow the appliance manufacturer's service instructions for removal and replacement.

This replacement support helps secure and stabilize its matching component inside your appliance, restoring proper alignment and a solid fit. A worn or broken support can lead to looseness, misalignment, or vibration and noise during use. What it does

• Provides structural support and correct positioning for the associated part or assembly
• Maintains alignment to help ensure smooth operation and proper fit
• Replaces cracked, warped, or missing supports
• Common symptoms: sagging or wobbling component, rubbing/scraping, rattling or vibration, visible damage

• 1 support

• Disconnect power; shut off gas/water if applicable before servicing
• Note the original orientation and mounting points; take a photo for reference
• Transfer any reusable clips/screws from the old part to the new support
• After installation, verify a secure fit and test operation

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference

This sachet holder housing assembly secures single-use detergent or cleaning sachets inside the dispenser so they stay in place and release correctly during cycles. Replacing a cracked or broken holder restores reliable sachet positioning and dispensing. What it does:

• Holds detergent/cleaning sachets in the dispenser so they don't shift or drop into the tub.
• Ensures sachets stay aligned for proper release during the wash or cleaning cycle.
• Helps prevent sachets from rupturing or blocking the dispenser area.
• Common symptoms of a bad holder: sachets falling out, sachets not dispensing properly, or poor wash/cleaning results.

• Disconnect power (and water, if required) before servicing the dispenser area.
• Access the dispenser per the owner's manual; the holder typically snaps into place or secures with a small fastener.
• Handle plastic clips and tabs gently to avoid breakage; use a non-marring pry tool if needed.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

This replacement cover restores the appliance's exterior appearance and protects internal components from dirt and accidental contact. It fits where the original cover was removed or damaged, helping keep controls and wiring protected. What it does

• Replaces a damaged, cracked, or missing access panel to restore cabinet protection and appearance
• Shields internal components from dust, spills, and incidental contact
• Helps prevent accidental access to wiring and electrical parts
• Useful when the original cover is warped, broken, or no longer securing in place

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove any retaining screws or clips from the original cover; installation typically reverses removal
• Handle edges carefully to avoid cuts; use gloves if panels are sharp
• Inspect and replace fasteners or mounting tabs as needed for a secure fit

This decorative trim piece replaces a damaged or worn exterior trim to restore the appliance's finished appearance and fit. It provides a clean edge and helps cover mounting gaps around the control area. What it does:

• Covers and protects the appliance edge where trim is installed, improving appearance
• Hides gaps between panels and the control area for a finished look
• Replaces cracked, chipped, bent, or missing trim that affects aesthetics
• Prevents sharp or exposed edges that can catch clothing or skin

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Typical installation requires removing adjacent screws or clips; have a screwdriver set handy
• Handle edges carefully; trim and surrounding metal can be sharp

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This small crisper pan is the replacement plastic tray that sits under the crisper drawer to support produce and catch spills, helping keep the refrigerator interior clean and organized. What it does:

• Supports the crisper drawer and helps keep stored produce level
• Catches moisture and small leaks to protect the refrigerator floor
• Helps contain spills for easier cleanup and prevents mess spreading
• Restores proper fit and function when the original pan is cracked or warped

• Remove all food from the crisper area before replacing the pan
• Slide the crisper drawer out to access the pan; lift out the old pan and set the new pan into the same position
• Inspect surrounding rails and seals for damage while installing
• No special tools required; handle plastic parts gently to avoid cracking