Parts for Kitchenaid KFIS29BBMS03: 08 - Shelf Parts

Reduces chlorine, contaminants, and odors from your refrigerator's water and ice. Replace every 6 months for optimal performance. Confirm fit by model.

This front pan is the front half of the outer tub assembly in a washing machine. It forms the watertight front section of the tub that houses and supports the spin basket and seals against the rear tub half.

• Forms the front portion of the outer tub to contain wash water
• Provides mounting and sealing surface for the door boot/bellow
• Supports the spin basket shaft and helps maintain proper alignment
• Wear or damage may cause leaks, rubbing noises, or vibration

• Disconnect power and water before service; use protective gloves
• Removal generally requires taking off the top, front panel, and door boot
• Transfer any seals, clamps, screws, and hardware from the original part
• Inspect and replace the tub gasket/door bellow if worn or damaged

Mounting plate for bottom-mount refrigerators. Replaces cracked, broken, or missing plates. Structural component that secures internal parts.

Replace a cracked or broken refrigerator support bracket. This structural component mounts inside your fridge to secure shelves or components.

Plastic ladder support that holds door shelves in place on your refrigerator. Replace if cracked, broken, or missing to restore proper shelf mounting.

Replace a cracked, broken, or missing refrigerator glass shelf. Restores storage space with a durable, easy-to-clean surface for food and containers.

Fix frost buildup and temperature issues with this refrigerator defrost heater. Heats evaporator coils to prevent ice accumulation and maintain cooling.

Decorative trim piece that covers and finishes the edge around your refrigerator's control area. Replace if cracked, broken, or missing to restore appearance.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

This pan front is the removable front panel for a refrigerator storage drawer. Replacing a cracked or missing front restores containment and gives a solid handhold so the drawer opens and closes smoothly.

• Forms the drawer's front wall and integrated pull
• Helps keep food from sliding out of the bin
• Common fix for cracked, broken, or missing drawer fronts
• Improve drawer alignment and closing after damage

• Safety first: Disconnect power before working inside the refrigerator
• Remove the drawer and place it on a flat surface
• Release retaining tabs or screws to remove the old front
• Align and snap/secure the new front; verify smooth operation before reinstalling

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replaces a cracked, broken, or missing access panel cover on your refrigerator. Restores exterior appearance and protects internal components.

Restores your refrigerator's exterior finish with this front trim frame. Secures the control area for a clean look. Replaces cracked, dented, or loose trim.

Mounting bracket that secures and stabilizes refrigerator assemblies. Replaces broken or missing brackets to restore proper panel alignment.

Replacement crisper drawer for bottom-mount refrigerators. Restores organized storage for fruits and vegetables when original is cracked, broken, or missing.

This replacement plate (burner drip bowl) sits under a cooktop burner to catch spills and protect the cooktop. It restores a clean appearance and helps prevent food and liquids from contacting the heating element. What it does:

• Catches drips and boiled-over food to keep the cooktop surface cleaner
• Shields the heating element or burner area from debris that can cause smoking or uneven heating
• Helps the burner sit flush and stable in the cooktop opening
• Visible cracks, warping, heavy corrosion, or large dents can cause poor fit or increased spills

• One replacement plate (burner drip bowl)

• Disconnect power (or shut off gas) to the appliance before beginning any work
• Allow the cooktop and burner to cool fully; use gloves to avoid sharp edges
• Remove the old plate by lifting or releasing any retaining clips; install the new plate in the same orientation so the burner seats properly

Replacement mounting plate for refrigerators. Secures and supports internal components for proper alignment. Needed when original is cracked or broken.

Drawer not opening smoothly or sticking? This refrigerator drawer slide rail lets freezer and fridge drawers glide in and out easily. Simple fix.

Drawer slide rail for bottom-mount refrigerators. Supports and guides storage drawers for smooth operation. Replace if cracked, bent, or worn out.

This is the right-side crisper plate — the shelf panel that supports the crisper drawer and its contents, helping keep produce organized and stable inside the refrigerator. What it does:

• Provides a stable shelf surface for the right crisper/drawer area
• Supports the crisper drawer and helps keep items from falling into lower cavities
• Replaces cracked, chipped, warped or missing right crisper shelf panels
• Restores proper seating and alignment for the crisper drawer on the right side

• Handle carefully during install to avoid chipping or cracking; use gloves if needed
• Slide the crisper drawer out and set aside before positioning the replacement plate

Drawer glide enables smooth sliding of refrigerator drawers and shelves. Replace if drawers stick, wobble, or don't close properly. Verify fit with your model.

Replacement cover plate for refrigerator internal components. Shields parts from debris and restores proper fit. Needed when original is cracked or missing.

Decorative trim piece that restores the finished look of your refrigerator where trim has become cracked, chipped, or missing. Covers exposed edges or seams.

Replacement drawer slide track for bottom-mount refrigerators. Installs inside the cabinet to support and guide drawers. Needed when cracked or worn.

Direct-fit slide guide for refrigerator drawers and shelves. Restores smooth tracking and prevents binding. Replace if cracked, broken, or worn out.

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

Front support bracket that secures your refrigerator's crisper drawer for smooth sliding and proper alignment. Replace if cracked, broken, or missing.

Mounting screw secures panels, trim, and internal components to your refrigerator frame. Replace when original is missing, stripped, or damaged.

This sachet holder housing assembly secures single-use detergent or cleaning sachets inside the dispenser so they stay in place and release correctly during cycles. Replacing a cracked or broken holder restores reliable sachet positioning and dispensing. What it does:

• Holds detergent/cleaning sachets in the dispenser so they don't shift or drop into the tub.
• Ensures sachets stay aligned for proper release during the wash or cleaning cycle.
• Helps prevent sachets from rupturing or blocking the dispenser area.
• Common symptoms of a bad holder: sachets falling out, sachets not dispensing properly, or poor wash/cleaning results.

• Disconnect power (and water, if required) before servicing the dispenser area.
• Access the dispenser per the owner's manual; the holder typically snaps into place or secures with a small fastener.
• Handle plastic clips and tabs gently to avoid breakage; use a non-marring pry tool if needed.

Replacement cover panel for your refrigerator. Installs to conceal internal components and complete the finished look. Order a new one if cracked or missing.

Replacement cover panel for your refrigerator. Installs on the interior or exterior to conceal wiring or components. Order if cracked or missing.

Tempered glass shelf for bottom-mount refrigerators. Replaces cracked, chipped, or missing shelves to restore level storage space inside your fridge.