Parts for Kitchenaid KRFC604FSS02: Shelf Parts

This small, spring-action push latch mounts in trim or liner to secure a flip-down compartment door or cover. Replacing a worn latch restores a positive close and smooth push-to-open operation to the affected door or panel.

• Provides the push-to-latch/push-to-release catch for a small door or cover
• Helps prevent nuisance pop-opens and rattling
• Common symptoms: door/cover won't stay shut, latch feels loose, cracked or missing latch
• Restores proper engagement and closing feel

• Disconnect power to the appliance before starting
• Open the compartment; depress retaining tabs or gently pry the old latch straight out
• Match orientation and snap the new latch fully into the opening
• Test operation: close to latch, press to release

This genuine replacement glass shelf restores usable storage space and a stable surface inside your refrigerator. It provides a flat, easy-to-clean platform for food and containers so your shelves stay organized and accessible. What it does:

• Replaces a cracked, chipped, or broken refrigerator shelf to restore safe, level storage
• Supports food, containers, and small appliances inside the fridge while resisting spills
• Helps keep stored items organized and prevents items from falling through damaged shelving
• Simple, visible part — commonly needed when glass is cracked, shattered, or deeply scratched

• One glass shelf

• Remove all items from the shelf area before replacing; use two hands and gloves to avoid cuts
• Lift the old shelf straight out of its supports and slide the new shelf into the same position
• Ensure the shelf seats fully on the supports and sits level before returning items
• Clean the compartment of all debris before installing replacement; follow appliance power/disconnect guidance per your model

This glass shelf provides a stable, easy-to-clean surface for refrigerator storage and restores usable shelving after chips or cracks. It replaces a damaged shelf so you can safely organize food and containers. What it does:

• Replaces a broken, cracked, chipped, or scratched refrigerator shelf
• Provides a flat, sturdy surface to support food, containers, and small appliances
• Helps restore proper storage layout and maximize usable shelf space
• Easy to wipe clean to reduce spills and odor buildup

• Handle carefully; glass can break—wear gloves and eye protection during installation
• Remove food and any items from adjacent shelves before replacing
• Set the shelf onto the existing shelf supports or rails, ensuring it seats evenly and is fully supported
• Clean with mild detergent and avoid abrasive pads or harsh chemicals

This is a genuine glass shelf designed to replace a broken or missing refrigerator shelf and restore stable storage for food and containers. It provides a clean, flat surface that helps keep items organized and visible. What it does:

• Replaces cracked, chipped, or missing interior shelving so you can safely store food and containers.
• Supports refrigerated items on a flat surface to prevent spills and improve organization.
• Fits into existing shelf rails or supports to restore proper shelf spacing and function.
• Helps maintain even airflow inside the compartment by providing a level storage plane.

• One glass shelf

• Remove food and shelving below the install area before replacing the shelf.
• Handle the glass carefully and wear cut-resistant gloves to avoid injury.
• Slide the shelf into the cabinet rails or supports until it rests securely; do not force.
• If glass is damaged, dispose of shards safely and check surrounding supports for damage before installing.

This replacement shelf stud secures a refrigerator shelf or door bin to the liner, restoring proper support and preventing shelves from sagging or coming loose. Easy way to repair a cracked, broken, or missing shelf anchor. What it does

• Mounts into the liner to hold a shelf or door bin securely in place
• Restores correct shelf alignment and prevents sliding or tipping
• Stops shelves from sagging or falling when weight is applied
• Common fix when the original stud is cracked, stripped, or missing

• Remove food and shelves/bins from the area before replacing the stud
• Install by pressing or snapping into the liner; use gentle hand pressure or appropriate non-marring tools
• Do not force or overtighten; check that the shelf/binnests seat securely after installation

A shelf mounting stud that secures a shelf or shelf bracket to the cabinet, helping restore proper shelf alignment and prevent slipping or dropping of items. Simple replacement keeps shelving stable and usable. What it does:

• Anchors a shelf or shelf bracket to the cabinet frame for secure support.
• Prevents shelf movement, sagging, or falling that can occur when a stud is cracked, bent, or missing.
• Restores correct shelf alignment so glass or wire shelving sits level and locks into place.
• Small, low-profile replacement used where original mounting studs have worn or broken.

• Disconnect power to the appliance before working near electrical components; remove stored items from the shelf first.
• Use basic hand tools to remove the old stud and install the replacement; retain original hardware if undamaged.
• Inspect surrounding shelf clips/brackets and the shelf edge for wear; replace damaged components to ensure a safe repair.

The Storage Drawer is an OEM replacement part for Whirlpool bottom-mount and side-by-side refrigerators. It provides additional organization within the interior for items like snacks, drinks, and condiments. 

Causes of a bad storage drawer can involve load limit overloading, physical damage like dents hindering movement, or wear on extending sliding components after repeat use.

Symptoms include:

• Issues fully extending or retracting from fridge interior
• Ability to secure properly compromised due to protrusions  
• Broken sliding rollers inhibiting smooth motion

This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement mounting spacer that helps position and secure components for proper alignment and stable operation. Restores correct spacing to reduce vibration and rubbing that can cause noise or premature wear. What it does:

• Maintains correct distance between mounting points and adjoining parts to ensure smooth operation
• Helps prevent rubbing, scraping, or misalignment-related noise during operation
• Supports stable mounting to reduce vibration and movement of nearby components
• Useful when worn, cracked, or missing spacers are causing fit or clearance problems

• Disconnect power to the appliance before beginning any repair
• Remove any panels or components needed to access the spacer
• Inspect adjacent mounts, fasteners, and seals; replace any damaged hardware for a secure fit

This tempered glass refrigerator shelf provides a stable, easy-to-clean surface for storing food and containers. It replaces a cracked, chipped or missing shelf to restore full usable storage and organization inside the fridge. What it does:

• Supports refrigerated items and containers while allowing light to pass between compartments
• Provides a flat, spill-resistant surface that's simple to wipe clean
• Replaces damaged, cracked or missing glass that can cause instability or safety concerns
• Fits into existing shelf rails or trim to restore proper shelf alignment and function

• One glass shelf

• Handle with care; glass can break if dropped or struck
• Remove food and sliding shelf supports before installing; set shelf into rails level and secure
• Clean mounting rails and shelf trim before installation for proper fit
• If shelf mounting hardware or trim is damaged, replace before use.

This Crisper Pan replaces a worn, cracked or missing refrigerator crisper drawer pan, restoring a stable surface to hold fruits and vegetables and contain spills. It fits into the crisper compartment to help organize fresh produce. What it does:

• Provides a stable, removable tray for produce storage
• Helps contain leaks and spills in the crisper area
• Replaces cracked, warped or damaged pans that can catch food debris
• Restores proper fit for the crisper drawer to slide smoothly

• Remove any food from the crisper area and slide out the drawer to access the pan
• Lift the old pan out straight to avoid damaging the drawer guides
• Install the new pan by aligning it in the crisper compartment and sliding the drawer back in
• Clean with mild detergent; avoid abrasive cleaners and extreme temperature shocks

This is a replacement glass shelf for refrigerators that restores a stable, easy-to-clean storage surface so food items sit flat and stay organized. Fits into existing shelf tracks to replace a missing, cracked, or damaged shelf. What it does

• Provides a flat, rigid storage surface for cartons, containers, and produce
• Replaces shelves that are cracked, chipped, broken, or missing
• Helps contain spills for easier cleanup and prevents items from falling through wire racks
• Restores usable shelving space and organization inside the fridge

• Remove all items from the shelf area before installation
• Slide the shelf into the existing side tracks until fully seated; do not force
• Handle carefully to avoid breakage and use protective gloves if needed
• If the shelf does not fit or seat smoothly, stop and verify shelf position and track condition

The Herb Container is an OEM part for Whirlpool refrigerators. It preserves freshness of delicate culinary herbs.

Causes of needing replacement include cracks or fractures in the glass breaking containment. Lids becoming disconnected or discolored from repeated washing compromise intended protection.

Symptoms involve:

• Inability to securely maintain herbs separate from moisture
• Leaks spoiling perishables from damaged seams
• Discolorations hindering identification of contents
• Missing lids exposing herbs to dehydration

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This OEM wire assembly routes power and signals to the refrigerator pantry compartment so lights, sensors, and controls receive reliable connections. Replaces a damaged or worn pantry harness to restore proper electrical continuity and component operation. What it does:

• Connects pantry compartment components (lights, sensors, controls) to the main wiring harness
• Restores electrical continuity when a broken wire or connector causes intermittent or no power
• Helps eliminate pantry light failures, sensor/thermostat communication issues, and related symptoms
• Provides factory-style connectors and routing for a clean, secure fit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Inspect connectors and routing; match original connector orientation and secure with existing clips or ties
• Do not splice or modify wiring; use the exact replacement harness for proper fit and function