Parts for Dacor EF48DBSS: Shelfs Parts

This genuine glass shelf provides a stable, easy-to-clean surface for organizing food and containers inside your refrigerator. It restores lost storage space and replaces cracked or missing shelving to keep items level and accessible. What it does:

• Replaces a broken, chipped, or missing refrigerator shelf so you can safely store food and containers.
• Provides a flat, rigid surface that helps keep items organized and prevents spills from spreading across compartments.
• Designed to sit on factory shelf supports for secure placement and proper airflow.
• Compatible with standard refrigerator interior shelving layouts; fits where the original glass shelf was installed.

• Handle the glass carefully and wear cut-resistant gloves to avoid injury during installation.
• Remove all items from the area before placing the new shelf to prevent dropping or chipping.
• Align the shelf with the refrigerator's shelf supports and lower it evenly into place; do not force.
• If the shelf does not seat easily, inspect support rails for obstructions or damage before continuing.

This crisper cover assembly replaces the removable shelf over the refrigerator crisper bin to restore a flat storage surface and help keep produce organized. It provides a stable surface for items above the crisper and contains spills. What it does

• Replaces a cracked, chipped or missing crisper cover so items don't fall into the bin below
• Restores a level shelf to support containers and produce stored above the crisper
• Helps contain minor spills for easier cleanup and prevents items from contacting the crisper drawer
• Fits into the fridge's crisper area and interfaces with existing support rails or ledges

• Remove food from the area and support the cover while removing/installing to avoid dropping
• Wear gloves and eye protection if cover is glass; handle carefully to avoid breakage
• Install by seating the cover into the fridge's support ledges or rails; no tools are typically required
• Verify correct orientation and secure fit before replacing food

This pan assembly sits under the appliance tub or base to catch and direct water away from internal components, helping contain leaks and prevent water damage. It replaces a damaged, cracked or warped pan. What it does:

• Collects and channels leaking or overflowing water away from electronics and flooring
• Restores the appliance's original drip containment and sealing surface
• Helps stop visible water pooling beneath the appliance
• Supports proper routing to drain points when used with the factory drain path

• Disconnect power and water supply before starting any repair
• Remove access panels and any components blocking the pan
• Handle carefully; edges may be sharp and gaskets or clips can be brittle with age
• Secure any fasteners, hoses, or seals to prevent new leaks

Right hand side

Left hand side

This pan assembly sits under the appliance tub or base to catch and direct water away from internal components, helping contain leaks and prevent water damage. It replaces a damaged, cracked or warped pan. What it does:

• Collects and channels leaking or overflowing water away from electronics and flooring
• Restores the appliance's original drip containment and sealing surface
• Helps stop visible water pooling beneath the appliance
• Supports proper routing to drain points when used with the factory drain path

• Disconnect power and water supply before starting any repair
• Remove access panels and any components blocking the pan
• Handle carefully; edges may be sharp and gaskets or clips can be brittle with age
• Secure any fasteners, hoses, or seals to prevent new leaks

Right hand side

Left hand side

Left hand side

Right hand side

Left hand side

Right hand side

Size: 8-18 x 1 1/4 inch.

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

This replacement meat pan is a direct-fit oven roasting/broiling tray that catches drips and holds food for even cooking. Restores proper oven function for roasting and broiling tasks and helps keep the oven cavity cleaner. What it does:

• Provides a stable surface for roasting meats, vegetables, and other oven dishes
• Catches drips and juices to prevent spills and reduce cleanup
• Helps promote even browning by holding food in the oven's heat path
• Commonly replaced when warped, cracked, or badly corroded

• One meat pan (as shown)

• Make sure the oven is OFF and completely cool before installing or removing the pan
• Slide into the oven racks or broiler drawer in the same position as the original; no tools required
• Inspect rack alignment and pan seating to ensure proper fit and safe operation
• Clean with warm, soapy water; avoid harsh abrasives that can damage finishes

This meat pan front assembly replaces the front panel of the refrigerator meat pan/deli drawer, restoring a proper seal and smooth drawer operation. It helps keep cold air in the drawer and protects stored meats. What it does:

• Replaces a cracked, warped, or missing meat pan front to restore drawer alignment and appearance
• Helps maintain proper cold storage in the deli/meat compartment by sealing the drawer edge
• Reduces rattling or sticking when opening and closing the meat/deli drawer
• Prevents food from contacting damaged trim and makes cleaning easier

• One meat pan front assembly

• High-level swap: remove drawer, detach old front, install replacement, and reinsert drawer
• Handle parts gently to avoid cracking the plastic during installation
• Unplug or disconnect power before working near electrical components as a safety precaution
• If clips or screws are damaged, replace them with OEM fasteners for a secure fit