Parts for Electrolux EI23BC36IW4: 09 - Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Deli drawer cover frame for your refrigerator. Replaces cracked, broken, or missing frames that support the deli drawer cover. Direct fit replacement.

Supports the glass shelf above crisper drawers and forms drawer tracks. Replace this frame if cracked, warped, or broken to restore stable shelving.

Crisper drawer pan for bottom-mount refrigerators. Holds fresh produce in the lower drawer compartment. Replace if cracked, broken, or missing.

Replace your cracked or broken refrigerator crisper glass shelf. This clear glass panel covers the crisper drawer to protect produce and maintain freshness.

Supports and secures crisper drawer glass in your refrigerator. Replace if frame is cracked, broken, or glass shifts during use. Restores stability.

Deli drawer slide for bottom-mount refrigerators. Installs on the drawer assembly to allow smooth gliding. Replace if cracked, broken, or worn out.

Glass shelf that sits above the crisper drawer, providing a smooth sliding surface. Replace if cracked, broken, or missing to restore your refrigerator.

Secures panels, trim, and brackets inside your refrigerator. Replace this #8-18 x 3/8 screw if the original is missing, stripped, or worn.

Replace your refrigerator's deli drawer pan if cracked, broken, or missing. This pan installs in the fresh food compartment to store deli items.

Molded plastic mounting bracket that secures and stabilizes refrigerator components. Replaces broken, cracked, or missing brackets to keep parts aligned.

Cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing covers. Installs on the cabinet to provide a finished appearance.

Seals water filter housing to prevent leaks in your refrigerator. Replace if filter leaks onto shelves or drips. Confirm fit with your model number.

This OEM Replacement Part is a water filter designed to fit most models of Electrolux side-by-side and French door refrigerators. Its primary role is to provide clean and fresh-tasting water for drinking, cooking, and ice-making.

The filter's reduction rates significantly decrease a range of contaminants including Cysts (99.99%), Class 1 Particulates (99.10%), Turbidity (97.80%), Aesthetic Chlorine (97.40%), Lead (99.30%), Mercury (96.60%), and certain herbicides and pesticides. The filter operates at a flow rate of 0.5 GPM with a max pressure of 100 psi and a max temperature of 100 F. It has been tested and certified to ANSI/NSF standards 42 and 53, underlining its quality and performance.

This filter, measuring approximately 8" x 2.5" x 2.37", has a simple push-in installation process that requires no special tools.

Replaces a broken or worn filter release button on your refrigerator. Installs on the filter housing to restore one-handed filter removal and replacement.

Secures the water filter and connects it to the supply line. Replace if your filter leaks, pops out, or won't stay seated. Verify fit with your model number.

Covers and protects the deli drawer air control assembly in your refrigerator. Replace this vent cover if cracked, broken, or missing to restore airflow.

Replace your refrigerator's insert pan cover if cracked, broken, or missing. This cover protects the insert pan compartment in bottom-mount models.

Restores the finished edge around your refrigerator crisper cover for a clean appearance and proper seating. Replaces damaged, cracked, or missing trim.

Clear cover frame for refrigerator deli drawer compartment. Replace cracked, chipped, or missing covers to restore secure food containment and visibility.

Supports the crisper shelf glass and forms the top of humidity drawers. Replace if cracked, warped, or broken from heavy loads or impact.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

Replacement spring for refrigerator water filter release rod. Restores tension so filter stays secured and releases smoothly. Needed when broken or worn.

Genuine mounting screw secures panels, brackets, and components inside your refrigerator. Replace missing, stripped, or damaged screws to stop rattling.