Parts for Electrolux EW26SS70IS6: 09 - Shelves Parts

Replacement trim basket for refrigerator crisper drawers. Installs around drawer edges for a finished look. Order if your trim is cracked or missing.

Plastic trim piece that covers the basket edge in your side-by-side refrigerator. Replace if cracked, broken, or missing for a clean finish.

Replace your refrigerator's crisper drawer trim if cracked, broken, or missing. This trim piece frames the crisper bin for a finished look.

Replacement pizza shelf for side-by-side refrigerators. Installs in freezer or fresh food compartment. Replace if cracked, broken, or missing.

Glass shelf for side-by-side refrigerators. Provides durable storage surface inside fresh food compartment. Replace if cracked, broken, or missing.

Lower freezer glass shelf that provides a flat storage surface. Replace when cracked, broken, or missing to restore organized frozen food storage.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

A light socket that holds the bulb in your refrigerator's freezer compartment. This electrical component provides power to illuminate the freezer interior when the door opens. Replace it when the freezer light won't turn on, flickers, or the bulb won't stay securely in place.

Refrigerator not cooling or display blank? This electronic control board regulates temperature and functions. Moderate DIY repair for side-by-side models.

Clear plastic cover for your refrigerator's crisper drawer. Protects produce and maintains humidity. Replace if cracked, yellowed, or broken. Direct fit.

This replacement cover is a molded protective housing that shields internal refrigerator components from debris and damage while keeping wiring and mechanisms secure. It helps maintain reliable operation and reduces the chance of contact-related faults. What it does:

• Protects internal components and wiring from dust, crumbs, and accidental contact
• Keeps mechanisms properly enclosed to prevent snagging or interference
• Helps reduce noise caused by loose parts or airflow around components
• Common symptom: cracked, broken, or missing cover that exposes parts or causes rattling

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Handle the cover carefully to avoid damaging mounting tabs; install using original fasteners.
• If clips or screws are worn or missing, replace them with OEM equivalents for a secure fit.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Replaces a cracked, broken, or missing front edge trim on your refrigerator shelf. Restores the finished lip that supports items and prevents spills.

This air baffle controls the flow of cold air between the freezer and fresh food compartments inside the refrigerator. It helps regulate temperature by directing airflow to maintain proper cooling in both sections. Replace this baffle if the refrigerator section is too warm or too cold, frost is building up unevenly, or you notice inconsistent temperatures throughout the unit.

Replacement crisper pan cover for refrigerators. Installs above crisper drawers. Replace if cracked, broken, or missing. Includes frame only.

Glass insert that sits over crisper drawers in your refrigerator. Replace if cracked, broken, or shattered during cleaning or normal use.

This sliding basket replaces a worn or damaged freezer/refrigerator drawer to restore easy access and organized storage. It lets you slide food in and out smoothly so you can reach items without removing shelves. What it does:

• Replaces cracked, bent or non-sliding drawer baskets for proper storage
• Slides on existing tracks to provide smooth access to stored items
• Keeps frozen or refrigerated items organized and contained
• Prevents items from falling through damaged or missing baskets

• Remove all contents and disconnect power to the appliance before servicing
• Slide the old basket out of the tracks and align the replacement with the same rails
• Inspect track rollers and guides; clean or replace hardware if worn for smooth operation
• Use caution handling edges; follow appliance manufacturer's service instructions

Basket hanger for side-by-side refrigerators. Secures door storage baskets in place. Replace if cracked, broken, or missing to restore basket support.

This is a slide rail that supports and guides a freezer basket or drawer inside the refrigerator's freezer compartment. It mounts on the right side and allows the basket to slide in and out smoothly for easy access to frozen foods. Replace this rail if the freezer basket is sagging, difficult to slide, or if the rail is cracked or broken.

Secures and guides refrigerator storage baskets for proper alignment and smooth sliding. Replace if cracked, broken, or worn to restore basket stability.

Basket hanger slide for refrigerator drawers. Installs on interior cabinet to support pull-out baskets. Replace if cracked, broken, or clips missing.

Right side.

Secures refrigerator drawers to slides for smooth movement. Replace when drawers stick, jam, or fall off tracks. Verify fit with your model number.

Replacement door basket hanger for side-by-side refrigerators. Secures door storage baskets in place. Replace if cracked, broken, or missing.

Secures a removable basket to your refrigerator, restoring proper support and alignment. Replace if worn, broken, or missing to prevent shifting.

This is a left-side slide rail that supports and guides the crisper drawer as it opens and closes inside the refrigerator. It mounts to the interior wall of the fresh food compartment and allows the drawer to glide smoothly. Replace this rail if the crisper drawer is difficult to open, sits unevenly, falls off track, or no longer slides in and out properly.

Left side.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Replacement drawer pan for side-by-side refrigerators. Installs inside drawer assembly. Order when original pan is cracked, broken, or missing.

Wine rack for bottom-mount refrigerators. Securely holds wine bottles inside your fridge. Replace if cracked, broken, or missing. Easy installation.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replace your refrigerator's water tank if cracked, leaking, or damaged. This reservoir stores water for the dispenser system in side-by-side models.

Refrigerator door shelf cover that snaps onto door bin rails. Replace this plastic cover if cracked, broken, or missing to restore a clean appearance.

Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.

Refrigerator support base plate that mounts components securely. Replace if cracked, broken, or missing to restore proper structural support.

Guides and secures the freezer ice cream shelf to keep tubs level and accessible. Replace if cracked, broken, or missing to restore proper alignment.

Left hand side. For the right hand side order 241674402

Right hand side. For the left hand side order 241674401

Fix warm refrigerator or freezer sections with this evaporator fan motor. Restores proper air circulation when cooling fails. Moderate DIY repair.

This return air seal keeps refrigerator airflow channels sealed so cold air returns to the evaporator properly, helping maintain consistent temperatures and reduce frost and moisture issues. It replaces a worn or damaged return-air gasket. What it does

• Seals the return-air opening to direct cold air back to the evaporator
• Helps maintain even cooling and prevents warm air infiltration
• Reduces frost, moisture buildup, and uneven temperature zones
• Commonly replaced when you notice poor cooling, excessive frost, or air leakage noises

• One return air seal

• Disconnect power before starting work
• Remove any trim or panels that block access to the return-air opening
• Seat the seal into the channel or mating surface; some installations use adhesive or retainers—follow the manufacturer's instructions

This cabinet insulation panel replaces the worn or damaged foam that surrounds the refrigerator compartment to help preserve internal temperatures and improve cooling consistency. It restores proper insulation where the original panel is missing or degraded. What it does

• Replaces torn, compressed, or missing cabinet insulation to help maintain refrigerator/freezer temperatures.
• Reduces cold air loss from the cabinet cavity that can cause frost buildup or longer run cycles.
• Helps the appliance reach and hold set temperatures more reliably.
• Supports proper airflow and component spacing behind liners and panels.

• Disconnect power before beginning any service to avoid electrical shock.
• Access may require removing interior liners or trim; keep fasteners organized for reassembly.
• Handle foam gently to avoid tears; position with the vapor barrier facing the original orientation.
• Use OEM instructions and replacement diagrams for exact placement; if adhesive is used, apply as directed by manufacturer.

This wire cover is a molded shroud that protects and organizes an appliance's wiring harness, helping prevent abrasion and accidental snagging for safer, more reliable operation. What it does:

• Shields wiring from contact with sharp edges and moving parts
• Helps reduce wear and chafing that can cause exposed conductors
• Keeps harnesses routed neatly to prevent pinching or interference
• Can help address symptoms like visible wire damage, intermittent electrical connections, or burning/plastic-odor concerns

• Disconnect power to the appliance before starting any work
• Typically secures with clips or screws after removing an access panel; basic hand tools usually required
• Verify proper routing and secure attachment so wires are not pinched
• If wiring shows damage, replace or repair wiring harness before reinstalling the cover

This wiring harness is a direct-replacement wire assembly that routes power and signals between the appliance's control and components, restoring reliable electrical connections so features and circuits operate as intended. What it does

• Delivers power and signal connections between control modules and components to enable normal operation.
• Replaces damaged or frayed wiring that can cause intermittent operation or loss of function.
• Helps correct issues such as components not receiving power, intermittent cycles, or features that stop working.
• Keeps wiring organized and secured to prevent chafing and accidental shorts.

• Always disconnect power to the appliance before checking or replacing wiring.
• Compare the new harness to the original and follow the appliance wiring diagram for correct routing and connections.
• Re-seat all connectors fully and secure any clips or ties; do not force mismatched connectors.
• If you find burned connectors, melted insulation, or other damage, inspect related components and replace as needed.

Replacement air guide duct for side-by-side refrigerators. Directs cold air flow between compartments. Order a new one if cracked or broken.

Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.