Parts for Electrolux EW26SS70IS6: 11 - Controls Parts

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Refrigerator motor bushing that surrounds the motor shaft to reduce vibration. Replace if worn, damaged, cracked, or missing to restore smooth operation.

Isolates the evaporator fan motor from its bracket to reduce vibration and noise. Replace if worn, cracked, or missing to keep the motor secure.

Fix SY EF error codes or warm refrigerator temperatures with this evaporator fan motor. Moderate DIY repair restores air circulation and cooling.

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Protective housing cover for the refrigerator temperature sensor. Mounts on the fresh food compartment wall. Replace if cracked, broken, or missing.

Fixes refrigerators that won't power on after outages, display CE communication errors, or cycle on/off repeatedly. DIY-friendly circuit board replacement.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

Fix food freezing in your fridge or inconsistent temperatures with a new damper control. This air damper regulates cold air flow. DIY repair in 30 minutes.

Secures the water filter and connects it to the supply line. Replace if your filter leaks, pops out, or won't stay seated. Verify fit with your model number.

Creates an airtight seal around your refrigerator door to keep cold air in and prevent frost buildup. Replace if torn, cracked, or loose. Confirm fit.

Shroud assembly that covers internal refrigerator components and directs airflow. Replace if cracked, damaged, or missing to restore proper airflow paths.

Replacement spring for refrigerator water filter release rod. Restores tension so filter stays secured and releases smoothly. Needed when broken or worn.

Air filter duct for side-by-side refrigerators. Channels air through the filter system. Replace if cracked, broken, or damaged to maintain airflow.

Refrigerator harness retaining clip secures wiring in place. Replace if broken or loose to prevent wire damage. Confirm fit with your model number.

Protects wiring harness edges in your refrigerator from wear and abrasion. Replace if cracked, broken, or missing to prevent wire damage and insulation.