Parts for Electrolux EW28BS85KSCA: 05 - Shelves Parts

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This shelf bracket supports and secures a refrigerator shelf, restoring proper shelf alignment and stability so stored items stay level and safe. Designed to replace a damaged or broken shelf support and help prevent shelf droop. What it does

• Holds the shelf in place at the correct height and angle to prevent tipping or sliding
• Restores a loose, sagging, or tilted shelf to stable use
• Works where a single shelf support bracket has cracked, broken, or gone missing
• Fits into the shelf track and mates with the shelf edge to lock the shelf position

• One shelf support bracket

• High-level replacement: remove shelf, unclip old bracket, snap or screw new bracket into the track, then reinstall shelf
• Use caution when handling glass shelves; support the shelf while removing/installing the bracket
• Disconnect power only if service requires reaching electrical components; this is typically a non-electrical, user-serviceable part
• If bracket does not snap into place easily, verify correct orientation and track engagement before forcing

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required

This shelf mounting channel is a replacement support rail that secures refrigerator shelves and helps keep glass or wire shelving aligned for stable storage. It restores proper shelf seating and prevents shelves from shifting or tilting. What it does

• Provides a stable mounting surface for a refrigerator shelf to sit on and lock into place
• Keeps shelves level so items don't slide or tip
• Replaces worn, bent, or broken shelf support channels that cause shelf misalignment
• Works with compatible shelf assemblies to restore intended shelf function

• One shelf mounting channel

• Remove power and empty shelf area before servicing to prevent injury or damage
• Typically snaps or screws into place on the refrigerator liner; reuse existing fasteners when possible
• Compare the new channel to the old part before installation

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

This soft-close deli drawer slide replaces a worn or damaged guide to restore smooth, controlled movement for the refrigerator deli drawer. It helps the drawer glide easily and close gently to protect stored foods and prevent slamming. What it does:

• Provides smooth gliding action so the deli/drawer opens and closes with less friction
• Soft-close mechanism slows and cushions the final travel to prevent slamming
• Restores proper alignment and prevents the drawer from sticking or catching
• Common symptom fix: drawer drags, closes abruptly, is noisy, or won't stay aligned

• One deli drawer slide (soft-close)

• Remove refrigerated contents and open drawer fully before servicing
• Basic hand tools may be required; follow the refrigerator's disassembly steps in the OEM guide
• Inspect mounting points and adjacent slides; replace matching side if both are worn

This slide crisper cover replaces the sliding top for a refrigerator crisper drawer to restore a smooth sliding surface and keep produce separated and visible. It fits into the crisper opening and supports the drawer above. What it does:

• Provides a smooth sliding surface for the crisper drawer so the drawer opens and closes properly
• Supports items stored above the crisper and helps keep produce contained
• Restores damaged, cracked or missing crisper cover functionality
• Helps maintain visibility of contents so you can find items quickly

• Remove food and the crisper drawer before installing; lift and slide the cover into the shelf tracks
• Handle carefully to avoid chipping or cracking during installation
• Use gloves to protect hands from sharp edges on broken covers
• If cover does not seat properly, remove obstructions before forcing into place

This genuine replacement screw secures panels and small components on select appliances, restoring fit and reducing rattles or loose parts. It's a direct-fit fastener where the original #8-18 x 3/8 screw is missing or worn. What it does:

• Fastens trim, panels or brackets to appliance frames and components
• Restores secure fit to stop rattling or misaligned parts
• Replaces stripped, rusted or missing screws that prevent proper assembly
• Matches original thread size and length for correct engagement

• Use the correct driver and engage threads straight to avoid stripping
• Do not overtighten; stop when the part is snug and secure
• Replace any damaged mating hardware for best fit
• Unplug the appliance or shut off power when accessing internal fasteners

This support is a molded mounting bracket designed to secure and stabilize appliance components, helping keep parts properly aligned and preventing sagging or movement during use. Durable plastic construction for reliable long-term positioning. What it does:

• Secures panels, assemblies, or internal components to the cabinet or frame
• Keeps parts aligned to prevent binding, rubbing, or uneven wear
• Supports weight to reduce stress on fasteners and adjacent parts
• Helps restore original fit and function after breakage or loss

• One support mounting bracket

• Disconnect power and, if applicable, water before beginning any repair
• Confirm correct orientation and seating before fastening; use factory screw locations
• Use appropriate, non-stripping fasteners and do not overtighten
• If the original part is damaged, remove all debris before installing new support

This filter release button is the push-button used to release and remove the refrigerator water filter housing. It restores simple, one-handed filter removal so you can replace your water filter cleanly and quickly. What it does:

• Replaces a damaged or worn filter-release push button that no longer unlatches the filter housing
• Allows the filter cartridge to be released from the housing for regular replacement
• Helps resolve symptoms like a stuck, loose, or non-responsive filter release mechanism
• Fits into the filter housing assembly and engages the release latch when pressed

• Disconnect power and shut off the water supply before servicing the filter area
• Remove any trim or access panels per your refrigerator manual to access the button
• Snap or fasten the new button into the housing until it engages; avoid forcing parts

The Refrigerator Water Filter Base is an OEM part for Frigidaire refrigerators. It holds the water filter in place and provides a secure connection to the water supply, ensuring clean and filtered water flows through the refrigerator.

Causes of a bad water filter base can include wear and tear over time, damage from improper filter installation, or issues with the water connections leading to leaks. Additionally, mineral buildup from hard water can affect the performance and integrity of the base.

Symptoms of a bad water filter base include:

• Water leaks around the filter area
• Poor water flow or reduced water pressure
• Filter not fitting securely or falling out
• Unusual tastes or odors in the filtered water

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This crisper cover trim restores the finished edge around the refrigerator crisper cover for a clean, factory appearance and proper seating. It replaces damaged or missing trim to help the crisper cover sit securely. What it does:

• Replaces the trim piece that finishes and protects the crisper cover edge.
• Helps the crisper cover seat correctly and reduces gaps where debris can collect.
• Restores cosmetic appearance when the original trim is cracked, worn, or missing.
• Prevents minor rattling or shifting of the crisper cover caused by damaged trim.

• Remove food from the crisper area and slide out the cover to access the trim.
• Align trim with the cover edge and press until clips or tabs engage; do not force.
• Inspect mounting clips—if they are broken the clips must be replaced for a secure fit.
• Handle glass or plastic covers carefully to avoid breakage.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

• One crisper cover (beam-style) as shown

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

This electronic control board regulates refrigerator functions like temperature, defrost cycles and display/status signaling to keep cooling and user controls operating properly. Replace a failed control board to restore normal electronic control and diagnostics. What it does

• Receives sensor inputs and directs compressor, fans and defrost components
• Manages temperature setpoints and cycles based on thermostat signals
• Controls user interface indicators and electronic readouts
• Can stop operations or cause error codes when the board fails

• 1 control board (main electronic control)

• Disconnect power before service to avoid electrical shock or damage
• Handle circuit board by edges and avoid touching components or connector pins
• Verify connectors and mounting are secure; match connectors before reapplying power

This wiring harness routes power and control signals between the appliance control board and its components so the unit can operate reliably. It replaces a damaged or faulty harness to restore proper electrical connections. What it does:

• Carries power and control signals to motors, valves, sensors and other components
• Provides factory-style connectors for secure, vibration-resistant connections
• Helps prevent intermittent operation caused by frayed wires or loose terminals
• Can resolve no-start conditions, random shutdowns, or communication error symptoms

• One complete wiring harness with factory-style connectors

• Disconnect power to the appliance before beginning any work
• Inspect connectors and wire routing; match connector shapes and pin counts before installing
• Secure harness away from hot surfaces, sharp edges and moving parts to prevent wear

This wiring harness replaces a factory electrical connection assembly to restore power and signal routing between appliance components. It helps re-establish reliable electrical connections so controls and motors can operate correctly. What it does

• Routes electricity and control signals between the control board and major components.
• Replaces damaged or worn connectors that can cause intermittent operation or component failure.
• Often used when an appliance won't power on, specific functions don't work, or wiring shows visible damage.
• Prevents loose connections that can lead to arcing or overheating when installed in good condition.

• Always disconnect power (unplug or switch off breaker) before starting work.
• Compare the new harness to the old one for connector type, pin count, and routing before installing.
• Route and secure the harness with existing clips or fasteners; avoid contact with sharp edges or hot surfaces.
• If you see burned connectors or damaged wiring, inspect mating components and replace as needed.

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

This genuine replacement spring provides the tension for the refrigerator water/filter release rod so the filter stays secured and releases correctly. Restores proper filter engagement for smooth insert and removal. What it does:

• Applies tension to the filter release rod so the filter locks and ejects reliably
• Helps prevent the filter from slipping or failing to latch
• Reduces binding or sticking when inserting or removing the filter
• Works with the filter housing release mechanism to maintain normal operation

• One filter release rod spring

• Disconnect power to the appliance before servicing; shut off water if accessing the water/filter area
• Remove the filter housing cover per your model's service instructions to access the spring
• Springs can be under tension—wear eye protection and handle carefully

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling