Parts for Frigidaire FGTR2042TD0: Shelves Parts

Refrigerator shelf frame that supports the glass shelf inside your fridge. Replace if cracked, broken, or warped to restore proper shelf support.

Uneven cooling or warm spots in your refrigerator? This airflow diffuser plate directs cold air evenly throughout compartments for consistent temperatures.

Replace your refrigerator door gasket seal to maintain proper temperature and energy efficiency. Prevents warm air leaks and frost buildup. Confirm fit with your model number before ordering.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

Fix a refrigerator light that won't turn on, flickers, or has a loose bulb. This interior light socket secures the lamp and restores reliable lighting.

Replace a cracked, broken, or missing temperature control knob on your refrigerator. Installs on the control shaft to restore accurate temperature selection.

This heat shield protects the oven cavity and nearby components from excessive heat, helping prevent damage and maintain safe operation. It replaces a damaged or missing oven heat shield to restore proper thermal protection. What it does:

• Deflects and dissipates heat away from sensitive oven components and wiring
• Helps prevent heat-related discoloration, warping, or premature part failure
• Restores proper oven airflow and thermal shielding after a bent, rusted, or missing shield
• Useful when inner liner damage or excessive radiant heat is observed

• Disconnect power to the appliance before beginning service
• Handle sharp edges with gloves; use caution when working around metal panels
• Verify correct orientation and secure with original mounting screws or clips

Fix a fridge that won't cool or runs constantly with this temperature control thermostat. Regulates compressor cycling for consistent temps.

Freezer frosting up or refrigerator losing cooling? The defrost timer controls defrost cycles to prevent frost buildup. Moderate DIY repair.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

This model-specific refrigerator cover encloses and protects a designated interior area or component. Replacing a cracked, loose, or missing cover restores proper fit and finish and helps maintain intended airflow and safe operation inside the cabinet. What it does

• Shields and encloses the specified compartment to protect internal components from debris and damage
• Helps maintain designed airflow and temperature by properly closing the opening
• Restores a clean, finished look and prevents items from snagging or falling into moving parts
• Common symptoms: cracked or broken cover, loose fit or rattling, visible gaps, or the cover will not stay attached

• 1 cover

• Disconnect power and remove items, shelves, or bins as needed to access the area
• Note fastener type and locations; retain and reuse original hardware
• Align tabs/guides, seat the cover fully, then secure without overtightening
• Restore power and confirm the cover is secure and clear of any fan or moving parts

The Shelf - "Spill-Safe" is an OEM part for Frigidaire refrigerators. This shelf is designed to contain spills and prevent liquids from leaking onto other shelves or the bottom of the refrigerator, helping to maintain cleanliness and order within the appliance.

Over time, heavy loads, accidental impacts, or temperature fluctuations can cause the shelf to weaken or break.

Symptoms of a bad shelf include:

• Visible cracks or breaks in the shelf
• Liquids leaking through the shelf
• Difficulty in fitting the shelf securely in place
• The shelf not supporting weight properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as the shelf that sits above the crisper drawers and supports various items while providing a lid to help maintain the humidity levels necessary to keep fruits and vegetables fresh longer. This cover typically is only the frame and does not include the glass.

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage to the cover that can compromise its structural integrity
• Warping or bending that affects the fit and function
• Difficulty sliding or fitting the cover properly over the crisper drawers

Causes of a bad crisper pan cover can include overloading the shelf with too much weight, impacts from dropping heavy items, or thermal stress from fluctuations in refrigerator temperatures.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replaces a cracked, broken, or missing drawer pan in your refrigerator's fresh food compartment. Restores organized storage for produce and snacks.

Replacement slide rail for refrigerator drawers and bins. Installs on cabinet side to guide smooth drawer movement. Replace if cracked, worn, or broken.

A replacement shelf trim that restores the front retainer and appearance of a refrigerator door shelf. Replaces cracked, broken, or missing trim to help keep items secure and improve the fridge's look. What it does:

• Secures items on the door shelf by forming the front retainer edge.
• Restores a finished appearance when the original trim is cracked, chipped, or faded.
• Helps prevent small items from sliding forward and falling off the shelf.
• Matches OEM fit and snaps into the existing shelf rail for a clean replacement.

• Empty and remove the door shelf or move items off the shelf before replacing the trim.
• Trim typically snaps into place; gently pry out the old trim and snap the new trim onto the shelf rail.
• No special tools are usually required; use a plastic trim tool to avoid scratching.

Replacement deli-style meat pan tray for refrigerator storage compartment. Restores proper organization when original is cracked, broken, or missing.

Glass insert that sits above crisper drawers in your refrigerator. Replace if cracked, shattered, or broken. Slides directly into the frame holder.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

Replacement shelf spacer that attaches to wire shelves in your refrigerator or freezer to hold them securely in place. Needed when original is lost or damaged.

Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.

Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.