Parts for Frigidaire FRFS2823AD2: Shelves Parts

This OEM-style refrigerator insulation panel replaces torn, wet, or missing foam behind the cabinet liner to help maintain temperature stability and reduce noise. It restores proper thermal barrier where the original pad has failed. What it does:

• Provides the inner thermal barrier between the cabinet and liner to help reduce heat transfer
• Helps prevent frost or condensation buildup caused by compromised insulation
• Dampens normal operating noise from the compressor and refrigerant lines
• Restores an even internal temperature profile when worn or damaged

• One refrigerator insulation panel

• Disconnect power and empty/remove items before servicing the unit
• Access typically requires removing interior panels or liner—keep fasteners organized
• Replace with like-for-like piece; avoid compressing or tearing the insulation during installation
• If adhesive or clips are used, ensure proper seating so the liner lays flat and seals correctly

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This cover assembly protects internal components and restores the appliance's exterior appearance. It provides a secure housing that helps keep wiring and mechanisms shielded from debris and accidental contact. What it does:

• Shields internal components and wiring from dust, moisture, and incidental contact
• Restores a finished appearance when a damaged or missing cover causes gaps or exposed parts
• Helps reduce rattling or vibration caused by loose or broken covers
• Supports proper airflow paths when required by the appliance design

• One cover assembly as shown

• Disconnect power (and water if applicable) before beginning any service
• Use basic hand tools; remove adjacent panels or trim as needed for access
• Handle carefully to avoid scratching the finish; align tabs and fasteners before tightening
• Replace damaged clips or screws to ensure a secure fit

This replacement crisper pan holds produce and other refrigerated items in the lower drawer, keeping spills contained and making drawers easy to slide for access. Fits the OEM drawer area to restore proper storage function. What it does:

• Provides a stable base for the refrigerator crisper/vegetable drawer to hold fruits and vegetables
• Contains spills and leaks to protect interior refrigerator surfaces
• Helps the drawer roll smoothly on its tracks when properly seated
• Replaces cracked, warped, or missing pans that cause leaks or unstable drawers

• Unplug the appliance or shut off power before beginning work
• Remove contents and slide out the old pan; inspect rails for damage before installing
• Seat the pan fully on the drawer rails so it slides smoothly and sits level
• Clean the area before installation; handle glass/plastic edges carefully to avoid damage

This support mounting bracket secures internal components and helps keep assemblies aligned so drawers, panels or controls operate smoothly. A simple replacement that restores proper fit and reduces noise from loose parts. What it does

• Provides a stable mounting point to hold panels, drawers or internal assemblies in position.
• Prevents sagging, misalignment or rubbing that can cause binding or uneven operation.
• Reduces vibration and rattling caused by broken or worn supports.
• Restores part fit and clearance so adjacent components move freely.

• Replace only when the original is damaged, cracked or missing; verify orientation before removing fasteners.
• Use appropriate hand tools; avoid overtightening screws to prevent cracking the plastic.
• Disconnect power or unplug the appliance if working near electrical components or controls.

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

This deli pan is the slide-out refrigerator drawer for storing meats, cheeses, and snacks. Replacing a cracked or missing pan restores organized storage space and smooth drawer operation in the fresh food compartment.

• Provides a dedicated compartment for deli items in the refrigerator
• Slides on side rails for easy access and visibility
• Helps contain minor spills and crumbs to protect shelves below
• Replace if cracked, warped, broken at the tabs, or not sliding/staying seated

• Disconnect power if working near interior lights or electrical components
• Remove food from the compartment; slide the damaged pan straight out
• Inspect and clean the side rails/tracks before installing the new pan
• Align the new pan with the tracks and slide fully into place; do not force

Color: Black/natural. Nylon

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

The Filter is an OEM part for Frigidaire refrigerators. This water filter is designed to reduce contaminants and impurities from your refrigerator's water and ice supply, ensuring you have access to clean, fresh-tasting water and ice at all times. The filter targets a wide range of waterborne contaminants, including lead, mercury, chlorine, pesticides, and pharmaceuticals, without removing beneficial fluoride.

Regularly replace your refrigerator's water filter every 6 months to maintain optimal water quality and flow. Prevent clogs for effective filtration.

Symptoms that indicate it's time to replace the FPPWFU01 Filter include:

• Noticeable decrease in water flow from the dispenser
• Unusual taste or odor in the water or ice
• The refrigerator's water filter indicator light turns on
• It has been more than 6 months since the last filter replacement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

The Crisper Pan Roller is an OEM replacement part for Frigidaire side-by-side refrigerators. Located in drawer tracks below crisper bins, these rollers facilitate smooth extension and retraction of crisper pans.

Symptoms of damaged crisper pan rollers include: 

• Difficulty fully withdrawing or pushing in crisper pans  
• Jumpy or uneven movement of pans on drawer slides
• Visible scratches or flattened spots on roller surfaces  
• Creaking or grinding noises emanating from drawer area

Causes relate to repeated weight impacts over years absorbing crisper loads containing vegetables and fruits. Rust accelerates on rollers exposed to humidity fluctuations inside drawers.

This pan roller is compatible with select Electrolux and Kelvinator models as well.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing