Parts for Frigidaire GRMC2273BF: Shelves Parts

This water reservoir tank holds and supplies cold water to the refrigerator's dispenser/ice system so the appliance can make ice and deliver water on demand. Replaces a cracked or leaking reservoir to stop drips and water loss. What it does

• Collects and stores water routed from the inlet valve for the dispenser and ice maker.
• Maintains ready water supply so the dispenser and ice maker can operate normally.
• Commonly replaced when the tank is cracked, leaking, or causing low/no water delivery.
• Can prevent water damage and restore reliable dispensing when the original tank fails.

• One replacement water reservoir tank.

• Disconnect power and shut off the water supply before starting; drain remaining water from the lines.
• Handle carefully to avoid stressing inlet/outlet fittings and gaskets; replace any worn seals.
• Verify hose/clamp connections are secure and test for leaks after restoring power and water.

This replacement rail is the sliding track that supports and guides a refrigerator drawer for smooth opening and closing. Restores proper alignment and helps prevent sticking, binding or drawers coming off the track. What it does:

• Provides a stable track for a refrigerator or freezer drawer to slide in and out smoothly
• Keeps the drawer aligned to prevent scraping or binding against the cabinet
• Helps stop drawers from falling forward or detaching when pulled
• Replaces worn or damaged rails that cause rough or uneven drawer movement

• Disconnect power and remove contents before working on refrigerator drawers
• Often accessed by removing the drawer and/or inner liner; basic hand tools may be required
• Reinstall drawer and test operation; ensure rail is seated and aligned before use

This mounting bracket secures a refrigerator component to restore proper alignment and reduce movement. It provides a simple, reliable replacement to stop rattling or sagging where a worn or broken bracket is the cause. What it does

• Provides a fixed mounting point to hold panels or internal components securely in place.
• Restores proper alignment to parts that have become loose, preventing rubbing or mis-seating.
• Helps eliminate noises caused by a loose or broken support.
• Suitable when the original bracket is cracked, bent, or missing.

• Disconnect power to the appliance before starting any repair to avoid electrical or mechanical hazards.
• Basic hand tools are typically required; use appropriate fasteners as originally supplied.
• Keep small parts and fasteners secure during removal/installation.

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations

This is a replacement refrigerator door gasket that helps restore a tight seal to the door, improving temperature control and reducing frost buildup and energy loss. What it does:

• Seals the refrigerator door edge to keep cold air in and warm, moist air out
• Helps prevent frost buildup and excessive compressor runtime
• Can resolve symptoms like warm interior temps, visible gaps when door is closed, or moisture/ice along the door seal
• Restores proper door closing and magnetic seal engagement when undamaged

• Disconnect power or unplug the appliance before servicing to avoid electrical hazard
• Remove the old gasket completely, clean the gasket channel, and press the new gasket into the channel evenly
• Verify the gasket is fully seated around the door and check for uniform contact when the door is closed
• Follow the manufacturer's instructions carefully

This cover is an access panel that protects internal oven/range components and keeps wiring and controls out of sight. It restores a clean finished appearance and helps prevent dust and debris from entering sensitive areas. What it does

• Shields control housing and internal components from spills, dust, and accidental contact
• Helps keep wiring and electrical connections covered and tidy
• Replaces cracked, broken or missing trim that exposes underlying parts
• Restores proper fit and finish to the appliance exterior

• Disconnect power to the appliance before attempting any service to avoid shock.
• May require basic tools (screwdriver) to remove fasteners and secure the replacement.
• Handle carefully to avoid scratching the finish; verify fasteners and alignment before tightening.

Keep your crisper performing at its best with this PureAir Produce Keeper refill. It restores the absorber inside your holder to help reduce ethylene gas and odors in the produce drawer for a cleaner-smelling refrigerator environment.

• Absorbs ethylene gas released by many fruits and vegetables
• Helps reduce food odors inside the crisper drawer
• If produce overripens quickly or odors persist, the refill may be spent
• Designed for use with the PureAir Produce Keeper holder

• Open the produce keeper housing in your crisper and remove the used refill
• Do not open or puncture the sealed refill; place it in the holder as directed and close securely
• Reinstall the holder in the drawer; wash hands after handling
• Always follow the safety and care instructions in your refrigerator and accessory manuals

This cover encloses and protects a designated area on the appliance, shielding internal components from debris and moisture while restoring a clean, finished look. Replace a cracked, warped, or missing cover to maintain safe operation and proper fit.

• Encloses and protects internal wiring or mechanisms in the covered area
• Helps keep dust, spills, and moisture away from components
• Restores a secure fit and finished appearance
• Common signs it's needed: broken tabs, cracks, discoloration, or the cover won't stay in place

• Disconnect power to the appliance before servicing
• Remove any retaining screws or release tabs; keep track of hardware for reassembly
• Transfer clips, seals, or inserts from the old cover if applicable
• Align tabs and start screws by hand; do not overtighten to avoid cracking

This PurePour Connect PWF-2 refrigerator water filter installs in the factory filter housing to help deliver cleaner, better-tasting water and ice. Replacing a saturated filter restores dispenser flow and keeps your refrigerator's water system working as intended. What it does

• Filters the incoming water for the dispenser and ice maker
• Routine replacement (about every 6 months or when the indicator turns on) helps maintain taste and flow
• A clogged/expired filter can cause slow dispensing, small/empty ice, or a "Change Filter" alert
• Designed for refrigerators that use the PurePour Connect PWF-2 filter style

• One refrigerator water filter (single cartridge)

• Turn off the water supply and dispense water to relieve pressure; place a towel to catch drips
• Insert the new filter fully and lock it in place; check for leaks
• Flush several pitchers of water after installation and reset the filter status light per your model

This water inlet valve controls water flow to the refrigerator's dispenser and ice system, restoring reliable water delivery and ice production when the original valve fails. Replaces a worn or leaking inlet valve to stop water interruptions. What it does:

• Opens and closes water flow to the dispenser and ice maker when the appliance requests water.
• Stops water flow when shut, preventing continuous fill or running water.
• Commonly used to address no-water, slow-fill, or intermittent dispensing problems.
• Also used when valve leaks or fails to respond to control signals.

• Disconnect power and shut off the water supply before starting work.
• Verify correct valve orientation and secure inlet/outlet fittings; check for leaks after installation.
• Handle electrical connectors carefully; ensure connections are tight and insulated.

This replacement tubing routes water between components inside your appliance. It restores reliable, leak-resistant water flow when the original line becomes brittle, kinked, or damaged, helping dispensers and ice systems work properly on applicable models.

• Transports water between the inlet valve and internal components
• Replaces tubing that is cracked, brittle, kinked, or leaking
• Helps address issues like leaks, reduced dispenser flow, or ice maker fill problems on applicable units
• Maintains proper water flow and pressure within the line

• Disconnect power and shut off the water supply before servicing
• Place a towel or tray to catch residual water and relieve line pressure
• Note the original routing; transfer any retainers or clips from the old line; ensure connections are fully seated and ends are cut square if trimming is required
• Restore water and power, then check all connections carefully for leaks

Replacement tube that routes water or condensate through the appliance to maintain proper drainage and prevent leaks. Installs in-line with existing plumbing to restore normal water flow and avoid pooling or ice buildup. What it does:

• Channels water or condensate between components to keep drainage paths clear
• Stops leaks caused by cracked, clogged, or disconnected tubing
• Helps prevent water pooling, ice buildup, or dispenser/ice-maker flow issues
• Restores normal fluid routing after damage or wear

• Disconnect power and shut off the water supply before starting
• Inspect fittings and routing; replace only with the OEM-designated path
• Use proper clamps or fittings; ensure secure, leak-free connections
• After installation, restore power/water and check thoroughly for leaks

This replacement door gasket seals the refrigerator fresh-food compartment to help maintain consistent temperatures and keep food fresh. It restores the cabinet seal to reduce airflow and prevent moisture buildup around the door. What it does:

• Forms an airtight seal between the fresh-food door and cabinet to help maintain interior temperature
• Helps reduce frost build-up and prevents warm air from entering the compartment
• Can stop drafts or uneven cooling caused by a torn, warped, or compressed gasket
• Fits where a continuous magnetic refrigerator door seal is required

• One door gasket

• Inspect the door frame and mounting channel for debris before installing; clean area for a proper seal
• Gasket typically stretches and inserts into a retainer channel; warm with a hair dryer if needed for easier fitting
• Check for full compression around the perimeter and trim excess material only if specified by the OEM
• Disconnect power or follow appliance safety guidance when working near electrical components or light switches

This is a replacement mounting screw used to secure components on compatible Frigidaire appliances. It restores proper fit and prevents loose panels or parts from rattling or shifting during operation. What it does:

• Secures panels, brackets, or small appliance parts to maintain proper alignment
• Prevents vibration-related noise caused by loose fasteners
• Replaces lost or stripped screws to restore safe, stable assembly
• Simple hardware replacement to keep appliance components secure

• One replacement mounting screw

• Power off and unplug the appliance before servicing to avoid shock or injury
• Use the proper screwdriver and align parts before tightening; do not overtighten
• Replace only the exact fastener specified by the manufacturer for that location
• If threads are damaged, inspect the mating part and repair or replace as needed

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling