Parts for Frigidaire GRMC2273BF: Fresh Food Doors Parts

This replacement door gasket seals the refrigerator door to help maintain consistent internal temperature and reduce energy loss. It restores a tight seal to improve cooling performance and help prevent frost buildup when the original seal is worn or damaged. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out
• Helps reduce frost buildup, condensation, and excessive compressor run time when the original gasket is failing
• Restores proper door alignment and contact along the door perimeter for consistent cooling
• Commonly replaced when the seal is cracked, torn, flattened, or no longer holds suction

• One door gasket

• Designed for drop-in replacement; remove the old gasket and press the new gasket into the door channel evenly
• Warm the gasket if needed to help it flex and seat; follow manufacturer instructions for any heat treatment
• Inspect mounting channel and door for damage before installing; replace any damaged trim or clips as needed
• Unplug the appliance or disconnect power prior to installation and allow interior components to cool

This refrigerator door gasket seals the door to keep cold air in and help maintain consistent temperatures for food safety and energy efficiency. Replaces a worn, torn, or misshapen seal to reduce drafts and moisture buildup. What it does

• Forms an airtight seal around the refrigerator door to prevent cool air leakage
• Helps maintain consistent internal temperatures for better food preservation
• Reduces frost and condensation that can form from air infiltration
• Can help improve energy efficiency when the original seal is failing

• Clean door flange and mating surfaces before installing to ensure proper sealing
• Warm gasket as needed (per OEM guidance) for easier positioning and to help it conform to the door
• Check alignment and seating around the full perimeter; adjust tabs or fasteners if present
• Unplug the appliance or shut off power before performing service if removal of interior panels or lights is required

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer

This replacement frame restores the appliance's front trim and helps secure nearby panels for a finished appearance. It replaces a worn, cracked, or damaged frame to improve fit and visual finish. What it does:

• Provides structural support for the appliance front and trim panels
• Aligns and secures adjacent panels, reducing gaps and rattles
• Restores the unit's cosmetic finish where the original frame was damaged
• Helps maintain proper spacing for doors and controls

• One replacement frame

• Disconnect power (or unplug) before starting any repair
• Handle carefully—edges and attached clips can be sharp
• Requires basic hand tools (screwdriver, nut driver); follow OEM diagram for screw/clip locations
• Replace fasteners or clips if they are missing or damaged before reassembly

This right-side stainless steel freezer door assembly replaces a damaged or dented freezer door and restores a clean, finished exterior. Fits models that use the 5304537074 door and matches factory appearance and function. What it does:

• Replaces a bent, dented, or cosmetically damaged right freezer door to restore fit and seal
• Provides the outer shell that attaches to hinges and accepts interior panels and gasket
• Helps maintain proper freezer closure to support consistent cooling
• Matches OEM finish and mounting locations for a factory-like replacement

• Installer-level replacement; may require removing freezer door, hinge screws, and transferring trim or door liners
• Use proper support to prevent dropping the door; two-person lift recommended for safety
• Disconnect power and empty the door area as needed before starting work

This name plate is the exterior ID label that restores the appliance's factory identification and appearance. It replaces a faded, torn, or missing label so the unit is easier to identify and looks finished. What it does:

• Provides the factory identification label used for appliance identification and service reference
• Restores the appliance's exterior appearance where the original label was damaged or missing
• Helps owners model/serial information displayed on the appliance surface
• Fits the location originally occupied by the manufacturer's label (surface-mount style)

• One replacement name plate

• Install using the original fasteners or adhesive; do not force or bend the plate
• Clean and dry the mounting area before installation for proper adhesion or fit
• Disconnect power to the appliance before working in areas that expose electrical components
• If original mounting hardware is missing or damaged, use like-for-like replacements rated for appliance use

This interior refrigerator lamp replaces a burned or dim light to restore usable illumination inside the appliance, making it easier to find items and temperatures at a glance. Simple swap restores safe, visible interior lighting. What it does:

• Replaces a failed or flickering refrigerator interior lamp so the compartment is properly lit
• Helps you see food clearly to prevent spoilage and make loading/unloading easier
• Restores normal operation when the lamp no longer lights or is visibly damaged
• Works with compatible Frigidaire refrigerator light housings and sockets

• One interior refrigerator lamp

• Disconnect power before servicing to avoid electrical shock
• Handle the lamp carefully; avoid touching glass with bare hands if it's a halogen-style bulb
• Seat the lamp securely in the socket and restore power to test operation
• If the lamp still doesn't work after replacement, check the socket and door switch for issues

The Handle Screw is an OEM part for Frigidaire refrigerators. It is a fastener or screw used to securely attach the refrigerator door handle. Properly installed handles allow for easy opening and closing of refrigerator doors with minimal effort. 

Causes of a bad Handle Screw include damage or wear over time and corrosion that causes the screw to seize or strip. 

Symptoms of a bad Handle Screw are:

• Loose or wobbly door handles
• Difficulty opening the refrigerator door  
• Handles detaching from the door
• Doors that will not stay closed securely

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This refrigerator door handle replaces a cracked, broken, or worn handle to restore a secure grip and clean appearance. It installs on the exterior of the fridge door so you can open and close the door safely and easily. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces handles that are cracked, chipped, loose, or damaged
• Restores door appearance and helps prevent accidental slips
• Works with the existing door mounting points and hardware on compatible models

• Basic hand tools typically required; mounting screws may be reused from the original handle
• Support the door while removing/installing the handle to avoid stress on hinges or trim
• Do not overtighten screws; snug is sufficient to avoid cracking the handle

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This bin assembly is a replacement refrigerator drawer that restores usable storage space and helps keep produce and smaller items organized. It fits into the refrigerator compartment and provides a removable, easy-to-clean storage surface. What it does:

• Replaces a cracked, broken or missing refrigerator drawer so items stay contained
• Restores proper product support and helps prevent items from sliding or falling
• Provides a smooth sliding/removable drawer for easy access to stored food
• Visible, rigid bin construction designed for everyday fridge use

• One bin assembly

• Install by sliding the bin into the existing cabinet rails until it seats; your model's manual for exact placement
• No special tools typically required; remove all food and shelves as needed for access
• Handle carefully to avoid cracking the plastic; wear gloves if necessary to prevent cuts from edges
• If the original mounting rails or supports are damaged, replacement of those parts may be required for secure installation

This replacement crisper drawer restores usable storage space in the refrigerator and keeps fruits and vegetables contained and protected from spills. It provides a direct-fit replacement to return proper drawer function and organization. What it does:

• Holds produce and small food items so they stay organized and visible
• Replaces a cracked, warped or damaged drawer that no longer slides or seals properly
• Helps prevent items from falling onto lower shelves and reduces spill cleanup
• Restores proper alignment with the refrigerator's drawer tracks and supports

• Remove food and empty the old drawer before starting
• Slide the old drawer straight out on its tracks and lift to release, if applicable
• Align the replacement drawer with the tracks and slide in until it seats properly
• Handle carefully to avoid chipping or cracking; do not force if it binds

This replacement bottle shelf is a refrigerator door bin that restores safe, organized bottle storage on the door. It keeps bottles upright and helps free up shelf space in the main compartment. What it does

• Provides a dedicated shelf on the refrigerator door for storing bottles and tall containers
• Keeps bottles upright to reduce tipping and spills during normal use
• Replaces cracked, broken or warped door bins that no longer hold items securely
• Restores full use of the door storage area and improves organization

• Remove all items from the door before removing the damaged shelf
• Typically installs by sliding into or snapping onto the door rail; align carefully and press until seated
• Avoid excessive force to prevent cracking the new shelf or door rail
• Clean the mounting area and handle glass or sharp edges with care during replacement

This replacement door bin restores lost or damaged interior door storage so bottles, jars and small items stay organized and secure. It returns usable shelf space and prevents items from shifting or falling when the door is opened. What it does:

• Provides a stable shelf on the refrigerator door for bottles, condiments and small containers
• Replaces cracked, broken or warped door storage that no longer holds items securely
• Restores proper fit and alignment so items don't slide or fall when the door is opened
• Snaps or slides into the door track to recreate original storage function

• Remove all items from the door before replacing the bin
• Most door bins are removed by lifting and pulling straight out; align and press the replacement into the door track until it snaps in place
• Wear gloves and handle edges carefully to avoid cuts from damaged plastic

This part number contains one (1) screw.

This mullion assembly replaces the vertical center trim between refrigerator doors to restore a finished appearance and help maintain a proper door seal. It's the correct replacement when the center trim is cracked, warped, or missing. What it does:

• Replaces damaged or broken center mullion trim to restore door fit and appearance
• Helps close the gap between doors to support proper gasket sealing and reduce cold-air leakage
• Stops rattling or door misalignment caused by a worn or broken mullion
• Restores the finished look of the door center where the mullion mounts

• Disconnect power to the appliance before starting any repair and remove food from door area as needed
• Remove any screws, clips, or door trim pieces holding the old mullion and carefully detach it before installing the new assembly
• Align new mullion, secure fasteners snugly (avoid overtightening), and confirm doors close and seal correctly

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling