Parts for Frigidaire PRFS2883AF1: Shelves Parts

This OEM-style refrigerator insulation panel replaces torn, wet, or missing foam behind the cabinet liner to help maintain temperature stability and reduce noise. It restores proper thermal barrier where the original pad has failed. What it does:

• Provides the inner thermal barrier between the cabinet and liner to help reduce heat transfer
• Helps prevent frost or condensation buildup caused by compromised insulation
• Dampens normal operating noise from the compressor and refrigerant lines
• Restores an even internal temperature profile when worn or damaged

• One refrigerator insulation panel

• Disconnect power and empty/remove items before servicing the unit
• Access typically requires removing interior panels or liner—keep fasteners organized
• Replace with like-for-like piece; avoid compressing or tearing the insulation during installation
• If adhesive or clips are used, ensure proper seating so the liner lays flat and seals correctly

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This user interface is the front control panel assembly that provides the touch buttons and display used to select oven/range functions and show time and temperature. Replacing a faulty interface restores responsive controls and readable display. What it does:

• Registers touch/button inputs so the appliance responds to temperature, timer and function selections
• Shows oven temperature, clock and status messages on the display
• Stops common symptoms like unresponsive buttons, blank or flickering display, or missing function feedback
• Works with the existing control electronics and ribbon/connectors to transmit commands

• Disconnect power to the appliance before starting any work.
• Handle the display and ribbon cable carefully to avoid damage.
• Test the interface and functions after reconnecting power before fully reassembling.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This shelf assembly replaces a broken or worn refrigerator shelf to restore storage space and stable support for food items. It fits into the shelf track and provides a flat, easy-to-clean surface for everyday use. What it does:

• Provides a sturdy, level surface for storing food and containers
• Replaces cracked, chipped, or missing shelves that cause items to shift or fall
• Restores proper spacing and organization inside the fridge compartment
• Simple design minimizes areas where spills can collect and eases cleaning

• One shelf assembly

• Install by sliding the shelf into existing tracks or ledges; confirm orientation before seating
• Use gloves to protect hands from sharp edges on broken glass and to avoid fingerprints on glass surfaces
• Do not overtighten any clips or brackets; ensure shelf is fully seated and level before loading
• If any tracks, brackets, or mounting clips are damaged, replace them before installing the shelf

This shelf assembly replaces a damaged or missing refrigerator shelf to restore usable storage space and keep foods organized. The durable shelf supports containers and helps prevent items from falling or spilling. What it does:

• Provides a stable, flat surface for storing food and containers in the refrigerator
• Replaces cracked, chipped, or warped shelving that can cause items to tip or spill
• Slides into existing side rails or supports for adjustable height and easy repositioning
• Helps maintain interior organization and maximizes usable shelf space

• One shelf assembly

• Remove food and any loose items from the area before installing
• Lift the shelf slightly, align with the side rails, and slide into place until fully seated
• Handle glass or trim components carefully to avoid breakage; wear gloves if needed
• If shelf does not seat smoothly, check rails for obstructions or damage before forcing into position

This crisper cover is the glass shelf used above the produce drawers to support items and help separate compartments. It restores a stable, flat surface and keeps foods accessible while maintaining proper airflow in the refrigerator. What it does:

• Provides a durable glass shelf over the crisper drawers for storage and organization
• Helps separate produce compartments to prevent items from shifting into drawers
• Restores a broken, cracked or missing shelf so foods sit level and safely
• Compatible with standard crisper assembly configurations found on select Frigidaire refrigerators

• Handle glass carefully; wear cut-resistant gloves to avoid injury
• Remove food and any debris from surrounding area before installing
• Seat the glass into the support rails or bracket slots until it rests securely
• Replace support rails or clips if damaged before installing the new glass

This support mounting bracket secures internal components and helps keep assemblies aligned so drawers, panels or controls operate smoothly. A simple replacement that restores proper fit and reduces noise from loose parts. What it does

• Provides a stable mounting point to hold panels, drawers or internal assemblies in position.
• Prevents sagging, misalignment or rubbing that can cause binding or uneven operation.
• Reduces vibration and rattling caused by broken or worn supports.
• Restores part fit and clearance so adjacent components move freely.

• Replace only when the original is damaged, cracked or missing; verify orientation before removing fasteners.
• Use appropriate hand tools; avoid overtightening screws to prevent cracking the plastic.
• Disconnect power or unplug the appliance if working near electrical components or controls.

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

A deli pan assembly that restores smooth sliding and support for the refrigerator deli/drawer area. Replaces a worn or damaged pan slide so the deli drawer opens and closes reliably. What it does

• Provides the sliding pan/drawer surface and integrated tracks so the deli drawer moves smoothly.
• Replaces worn rollers or bent tracks that cause the drawer to stick or bind.
• Restores proper alignment and support to prevent the drawer from falling or dropping.
• Helps eliminate squeaking or grinding noises from a failing deli drawer slide.

• Disconnect power to the appliance and remove food from the drawer before starting.
• Remove the old deli pan assembly by unfastening retaining clips or screws; install the new assembly by aligning tracks and seating the roller per the OEM mounting points.
• Avoid forcing the assembly; verify tracks are clean and undamaged before installation.
• If mounting hardware or additional trim is missing/damaged, obtain OEM replacements—this part includes the pan with tracks and roller only.

Color: Black/natural. Nylon

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

The Filter is an OEM part for Frigidaire refrigerators. This water filter is designed to reduce contaminants and impurities from your refrigerator's water and ice supply, ensuring you have access to clean, fresh-tasting water and ice at all times. The filter targets a wide range of waterborne contaminants, including lead, mercury, chlorine, pesticides, and pharmaceuticals, without removing beneficial fluoride.

Regularly replace your refrigerator's water filter every 6 months to maintain optimal water quality and flow. Prevent clogs for effective filtration.

Symptoms that indicate it's time to replace the FPPWFU01 Filter include:

• Noticeable decrease in water flow from the dispenser
• Unusual taste or odor in the water or ice
• The refrigerator's water filter indicator light turns on
• It has been more than 6 months since the last filter replacement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

The Crisper Pan Roller is an OEM replacement part for Frigidaire side-by-side refrigerators. Located in drawer tracks below crisper bins, these rollers facilitate smooth extension and retraction of crisper pans.

Symptoms of damaged crisper pan rollers include: 

• Difficulty fully withdrawing or pushing in crisper pans  
• Jumpy or uneven movement of pans on drawer slides
• Visible scratches or flattened spots on roller surfaces  
• Creaking or grinding noises emanating from drawer area

Causes relate to repeated weight impacts over years absorbing crisper loads containing vegetables and fruits. Rust accelerates on rollers exposed to humidity fluctuations inside drawers.

This pan roller is compatible with select Electrolux and Kelvinator models as well.

This replacement wiring harness connects the appliance control to its electrical components, restoring reliable electrical connections so controls, motors and heating elements can function as intended. What it does

• Routes and links the control board to switches, sensors, motors and heating elements.
• Restores electrical continuity when a damaged or broken harness causes controls or components to lose power.
• Helps stop intermittent operation or component failures caused by loose, corroded, or damaged wiring.
• Visible damage, burning smell, or melted insulation are common signs this harness needs replacement.

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Take reference photos of connector locations before removing the old harness to ensure correct routing and reconnection.
• Match each connector and secure all plugs until they click; avoid pinching wires when reassembling panels.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing