Parts for Gibson GRT17G4BW9: 07 - Shelves Parts

The Freezer Shelf is an OEM part for Frigidaire freezers. This shelf provides additional storage space within the freezer, allowing for organized placement of frozen foods and optimizing the use of available space.

Common causes of a bad freezer shelf include overloading the shelf with heavy items, accidental impacts that can cause bending or breakage, or regular wear and tear from frequent use. 

Symptoms of a bad freezer shelf include:

• Cracks or breakage in the shelf material
• The shelf not fitting securely or wobbling
• Difficulty in sliding or positioning the shelf
• Visible warping or bending

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Molded plastic deflector that directs airflow inside your refrigerator. Replace if cracked, warped, or missing to restore proper air circulation.

Warm spots in lower fridge? This bottom air diffuser directs cold air to maintain even temperatures. Simple snap-in installation restores airflow.

Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Refrigerator light won't turn on or flickers? A faulty light socket is often the cause. This snap-in replacement restores interior lighting in 10 minutes.

Control box housing for refrigerator electronic control boards. Replaces cracked, broken, or missing housings that protect the circuit board assembly.

Replace a cracked, broken, or missing temperature control knob on your refrigerator. Installs on the control shaft to restore accurate temperature selection.

Refrigerator not cooling or freezing? A faulty temperature control thermostat causes inadequate cooling. DIY repair in 5-10 minutes with basic tools.

This is a 31-inch plastic tube that serves as a protective sleeve for the temperature sensor inside the refrigerator compartment. It houses and shields the sensor probe, helping ensure accurate temperature readings. Replace this tube if it is cracked, broken, or damaged, which can lead to inaccurate temperature regulation and inconsistent cooling.

Refrigerator not cooling but freezer icing up? The defrost timer controls the defrost cycle. Most DIYers replace it in 5-15 minutes with our video guide.

Sliding full-width shelf frame that supports the glass shelf insert in your refrigerator's fresh food compartment. Replace if cracked, warped, or broken.

Sliding shelf frame that supports the glass shelf and allows it to pull out smoothly. Replace if cracked, warped, or broken to restore stability.

Humidity control slide for refrigerator crisper drawers. Replace if broken, cracked, or missing to restore adjustable ventilation for fresh produce storage.

Crisper drawer humidity control slide for refrigerators. Replaces broken, cracked, or stuck humidity adjustment slider on fresh food drawers.

Clear plastic drawer that slides into the lower section of your refrigerator to store fresh produce. Replace if cracked, broken, or missing.

Plastic trim that frames and secures the front edge of refrigerator glass shelves. Replace when cracked, broken, or missing to properly hold shelving in place.

Replace your cracked, broken, or damaged refrigerator meat pan. This drawer installs in the fresh food section to store meats and perishables separately.

This is a glass refrigerator shelf. The purpose of the glass shelf is to create additional space to store food and beverages inside of the refrigerator. Several shelves may be used to break up the vertical space and make it easier to store additional items. While shelves like this one are durable, they can be damaged if made to hold too many products or if dropped while cleaning.The first step to replacement is unplugging the appliance or turning off the appropriate circuit breaker. The items that are on the broken or damaged glass shelf will need to be moved until the process is complete. Grasp the assembly and lift it so it can be removed from the appliance. The trim around the edge can be removed and installed onto the new glass shelf. Once that is complete, install the new glass shelf and replace the items that were on the original part. Plug the refrigerator back in for use.The glass shelf is an authentic OEM replacement component. It was made to be used with many refrigerators manufactured by Gibson and Frigidaire. This part is sourced directly from the manufacturer and is sold as a single part.

Rear shelf trim for refrigerator shelves. Snaps onto the back edge of the shelf to hold glass securely in place. Replace if cracked, broken, or missing.

Left-hand meat pan hanger that mounts to the refrigerator side wall to support the meat pan. Replace if cracked, broken, or missing for secure pan storage.

Right-side hanger rail that mounts under the top shelf to support the meat pan drawer. Replace if broken, cracked, or no longer holding the pan securely.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

This replacement energy guide label displays an appliance's estimated energy use and operating cost so you can read the official efficiency information. It restores missing or damaged labeling to meet consumer information needs. What it does:

• Provides the appliance's estimated annual energy consumption and estimated yearly operating cost in plain language
• Replaces torn, faded, or illegible factory energy guide decals
• Helps restore visible efficiency information required for consumer reference
• Useful when the original label has been removed or damaged during service or transport

• One replacement energy guide label

• Clean and dry the mounting surface before applying to ensure good adhesion
• Align carefully; press firmly to remove air bubbles for a secure bond
• No special tools required; replace only when appliance is powered off and cool if label area may be hot
• Follow local regulations for labeling and disposal of old labels

This replacement energy guide label displays an appliance's estimated energy use and operating cost so you can read the official efficiency information. It restores missing or damaged labeling to meet consumer information needs. What it does:

• Provides the appliance's estimated annual energy consumption and estimated yearly operating cost in plain language
• Replaces torn, faded, or illegible factory energy guide decals
• Helps restore visible efficiency information required for consumer reference
• Useful when the original label has been removed or damaged during service or transport

• One replacement energy guide label

• Clean and dry the mounting surface before applying to ensure good adhesion
• Align carefully; press firmly to remove air bubbles for a secure bond
• No special tools required; replace only when appliance is powered off and cool if label area may be hot
• Follow local regulations for labeling and disposal of old labels

Seals the evaporator coil cover to prevent air bypass and direct cold air over coils. Replace if worn or damaged to restore airflow and reduce frost.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

Seals the evaporator coil cover to prevent air bypass and direct cold air over coils. Replace if worn or damaged to restore airflow and reduce frost.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

Control box wiring harness assembly for refrigerators. Connects control board to components. Replace if wires are damaged, connector is cracked, or harness is worn.

Control box wiring harness assembly for refrigerators. Connects control board to components. Replace if wires are damaged, connector is cracked, or harness is worn.