Parts for Poulan PPB335: Shield / Driveshaft / Handle Parts

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

The trigger kit is a set of two parts that help ensure lawn and garden equipment is used in a safe manner. It is part of the throttle assembly and ensures the motor does not start running if the trigger isn't pulled at the same time as the starter string being pulled. If the parts of the trigger kit become damaged or broken, the equipment will no longer start. A new trigger kit will need to be installed to use the tool.Getting to the trigger kit parts involves taking the handle off of the machine. Take off the coupler and lower shaft before separating the plastic trigger housing. Once that has been done, a visual inspection can be done of the spring and trigger. Remove the cable and old trigger before replacing it with the new part and reassembling the tool.This trigger kit is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with a trigger and a spring. The trigger kit is designed for use with pole pruners and string trimmers created by Craftsman, Poulan, and Poulan Pro. This part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a replacement flexible driveshaft. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a broken or defective driveshaft in line trimmers.The flexible drive shaft works to drive the line trimmer's cutting head by fitting inside the driveshaft housing. If this part is defective in any way, the user may struggle to adequately maneuver the equipment, thus this part should be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this flexible driveshaft, the appropriate owner's manual and equipment diagrams should be referred to. This flexible driveshaft is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with line trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.

This shield kit is a genuine Husqvarna part, sold individually. This shield kit can be used as a replacement part in a string trimmer. The purpose of the shield kit in a string trimmer is to protect the operator from flung debris.The shield kit in a string trimmer might have to be ordered as a complete replacement part in a shield or a guard that can no longer protect the operator from flung-up materials during the operation of the appliance. If the shield is sufficiently damaged in the form of puncturing, denting, warping, eroding, or other forms of damage to the point that the operator is no longer protected by it, the shield kit should be ordered as a genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This shield bracket is a genuine Husqvarna part, sold individually. This shield bracket can be used as a replacement part in a string trimmer. The purpose of a shield bracket in a string trimmer is to secure the shield so that flung debris can be safely kept away from the operator during use.The shield bracket in a string trimmer might eventually have to be replaced if it can no longer hold the shield firmly in place while the appliance is being operated. The shield bracket could be dented, punctured, scraped, warped, or eroded to the point that it cannot hold anything in place, and if this occurs, the shield bracket should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This replacement part is a line head assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as a line trimmer or edger. This metal cutting head attaches to the gearbox assembly and is responsible for securing the fixed trimming line strips. A new line head assembly might be needed if the current one is damaged or broken in any way. If this part has become detached and the user is unable to reattach this part, it is best to replace it as soon as possible. Be sure the engine is completely powered off before attempting to replace this part. Refer to the owner's manual for more detailed instructions on how to replace the line head assembly. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This part is a replacement fixed line cap. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken fixed-line cap in line trimmers.This fixed line cap secures the fixed cutting lines. It attaches to the line trimmer's driveshaft. If cracked, detached, or otherwise faulty, this part should be immediately replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular fixed line cap, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This fixed line cap can be used with a variety of line trimmer models manufactured by Husqvarna, Poulan, and other brands.