Parts for Mtd 820 THRU 829: Shift Lever Parts

The variable speed belt goes around the engine pulley and the variable speed pulley. It is used on machines that have variable speed pulley drives and that need to be able to operate at different speeds. hese belts will wear down over time and need to be replaced. If the belt breaks, stretches too much or is worn down, replace it with a v-belt that fits properly. A screwdriver, pliers, socket set, and a wrench set will be needed to replace the belt. This is a genuine OEM part for lawn tractors, as well as other types of equipment with variable speeds, such as a snowblower, tiller, wood chipper, or log splitter. It is sold individually, and it will work on lawn tractors from many brands, including Ryobi, MTD, Craftsman, Yard Machines, Yard-Man, Turf King, and Mastercut.

This part is a replacement flange bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective, worn, or broken flange bearing in various models of outdoor power equipment.Bearings reduce friction between moving parts and thus are essential to proper equipment functionality. Bearings may become worn, corroded, or ineffective over time and thus will need to be replaced with a genuine OEM replacement part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this flanged bearing, the appropriate owner's manual and equipment diagrams should be referred to. This flange bearing is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a washer. This part is a genuine replacement part made by MTD. Washers are an important part of many different types of appliances. These small pieces work together with nuts and screws to help different parts of the machine stay in place and secure so that everything operates smoothly. A new washer might be needed if the current one is missing or damaged in any way. It is possible that washers can become stripped over time and might not stay in place. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. Be sure to wear work gloves during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This variable speed pulley is a genuine MTD part, sold individually. This variable speed pulley can be used as a replacement part in a lawn mower. The purpose of a variable speed pulley in a lawn mower is to regulate and manage the speed at which the motor runs so that the speed can be kept within a stable range for the safety of the operator of the appliance.The variable speed pulley in a lawn mower might have to be replaced if the variable speed pulley can no longer properly manage the speed of the lawn mower. This could occur if the variable speed pulley suffers damage from general wear and tear with long-term use or as the result of an accidental collision with a hard object that warps the variable speed pulley beyond functionality. This replacement should be executed in accordance with the proper instructions sourced from a relevant appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This variable speed pulley is compatible with the following outdoor appliance brands: MTD.

This hex nut is designed for use with select trimmers and mowers. It is a standard hardware part that may have multiple applications depending on the type of unit and model. The nut is typically used to secure engine components or housing elements to provide safe use of the machine. These nuts are durable, but they are small and can become lost during other repairs. The constant exposure to vibrations and use can also cause them to strip or become damaged over time. Either way, a replacement with this genuine hex nut will resolve the issue and get equipment back in working order. This genuine OEM hex nut is manufactured to exact standards and sourced from the manufacturer. It can be used with trimmers and mowers from RYOBI, MTD, Bolens, Troy-Bilt, Yard Machines, Huskee, Yard Man, and Cub Cadet. Check the parts diagram for exact application and location of this nut and note that it may have multiple uses on select models. This hex nut is sold individually, and additional nuts will require the purchase of multiple pieces. In order to replace this nut, a hex socket wrench and driver will be required. Always wear gloves for safety.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

This part is an idler pulley. The idler pulley applies tension to and guides the engine drive belt. A wrench set is needed to perform any repair involving the idler pulley part.The idler pulley can become worn over time with normal use. Wear to the pulley can cause the belt to slip. Signs that the idler pulley needs to be replaced include squealing noises coming from the equipment, the engine stalling, or overheating. The idler pulley is an essential component and it is important to replace this part if it becomes worn, broken, or damaged in any way.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This idler pulley is compatible with lawn tractors and snowblowers manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This replacement part is a cotter pin. It is a genuine replacement part made by MTD. Cotter pins are also sometimes known as clevis pins and are responsible for fastening two metals together. This allows the machine to work properly and operate smoothly. A new cotter pin might be needed if the current ones are damaged in any way or even missing. This part is small so it can be misplaced after years of normal wear and tear. It is possible that this part become stripped or lodged in place over time. The repair should be fairly easy and only require common tools. Be sure the engine is completely powered down before beginning this repair. This pin is sold individually. This is a genuine OEM replacement part sourced directly from the manufacturer to ensure a proper fit.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This screw is used on a variety of lawn and garden equipment from many manufacturers. This hex screw is a large bolt that has a six-sided head that can be used to fasten metal to wood or wood to wood. This type of screw is unique from traditional screws because the bolt head needs to be held with a socket while a second wrench is used to tighten or loosen the part. The bolts have a smooth shank and small threads. These screws can break or become damaged and no longer do their job. When that happens, they will need to be replaced. A hex key wrench can be placed into the slot of the screw and turned counterclockwise to loosen up the bolt. The replacement hex screw can then be placed in the original hole to adhere parts together on lawn equipment. This is a genuine replacement OEM screw that is commonly used on Craftsman, Toro, Murray, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, MasterCut, Cub Cadet, and Huskee lawn mowers, log splitters, snowblowers, chainsaws, tillers, and string trimmers. The screw is sold individually and made of durable metal.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

This ferrule is a genuine MTD part, sold individually. This ferrule can be used as a replacement part in a lawn mower. The purpose of the ferrule in a lawn mower is to fasten components to one another through a circular ring mechanism that seals onto one or more components.The ferrule in a lawn mower is a small component that can be easily misplaced or lost within the standard lifespan of the appliance. If the ferrule is lost at some point during the operation of the appliance, it should be immediately replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This ferrule is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard Man.

This OEM part is a cotter pin for lawnmowers. The cotter pin is the small clip that secures the mower deck to the mower. A cotter pin can become rusted or damaged due to exposure to the elements. If the cotter pin is no longer securing the mower deck, then it will need to be replaced. Luckily replacing this part is a relatively simple fix.To replace the cotter pin, start by making sure the mower is turned off. After that, locate the old damaged pin. Use a pair of pliers to pull it out of its place. Once removed, slide the new pin into its opening and make sure it is set securely on the mower deck. Once secured, turn the mower on to see if the pin can hold the mower deck.This genuine replacement part is sold individually and is compatible with MTD brand mowers.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of a flat washer for one of these small engine outdoor appliances is to prevent friction between one or more components while also creating spacing between components.The flat washer in a small engine outdoor appliance is a very small component that can be easily lost or misplaced at any point during its typical lifespan. The flat washer could also suffer damage during the course of general use, and if the damage to the flat washer precludes it from reducing friction and spacing one or more components, the flat washer should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a replacement part for select riding mowers designed to ensure smooth rotation for years of use. This part is circular and tapers off into a hexagonal shape to support rotating shafts that create friction inside of machinery. Rotating parts are almost a given in most machinery like riding mowers, so the hex flange bearing provides support in multiple ways to parts such as wheels, rotors, and gears.The hex flange bearing serves two fundamental roles to make machinery run efficiently. For starters, friction will inevitably occur in rotating shafts, so bearings reduce the amount of friction and related wear and tear. The second function of this part is protecting the rotating from damage due to pressure created during operation.This genuine OEM sourced replacement part is intended to be used for lawn tractors from MTD and other yard machines. This part is compatible with manufacturers including Yard Machines, Bolens, Yard Man, Troy-Bilt, Cub Cadet, and Husky. A wrench may be used for an easier replacement installation. This item is available for purchase individually.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective, broken, or lost washer in outdoor power equipment.Washers are a standard piece of hardware that provide a larger bearing surface for screws and bolts, allowing them to securely fix comonents together more efficiently. They may become lost or worn, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular washer, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This washer can be used with outdoor power equipment manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This center hex nut is a genuine MTD part, sold individually. This center hex nut can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the center hex nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to provide a fastening component for one or more parts within the internal mechanisms of the appliance.The center hex nut might need to be replaced if the small fastening component is lost, misplaced, or damaged within the typical lifespan of the small engine outdoor appliance in which it has been installed.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This center hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This part is a replacement extension spring. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current extension spring is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractors.Extension springs help to absorb energy created by different parts, as well as create resistance to bring two parts back together. Springs can stretch out, snap, corrode, or grow defective over time and thus will require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this extension spring, the appropriate owner's manual and equipment diagrams should be referred to. This extension spring is suitable for use on a variety of lawn tractor models manufactured by Craftsman, MTD, Troy-Bilt, and Yard Man. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a genuine replacement idler bracket that is used with lawnmowers. This bracket is used to hold the pulley and belts in place while also protecting them. An idler bracket that is worn, rusted, or damaged should be replaced to avoid damage to the mower's pulleys and belts.The process for replacing this part will vary depending on the model of the mower, so consult the equipment's manual and diagrams for specific instructions. To replace, a wrench or socket set of the correct size is needed. The idler bracket is located above the pulley systems in the mower deck. Remove the mower deck from the mower by unbolting the attaching arms. Depending on the machine, remove all items attached to the idler bracket. Replace idler bracket and attachments, and reattach the mower deck to the bottom of the mower. This is a genuine MTD replacement part. This part is compatible with Yard Machines, MTD, Huskee, and Yard-Man lawn mowers. This part is sold separately.

This pulley is a genuine MTD part, sold individually. This pulley can be used as a replacement part in a lawn mower or a snowblower. The purpose of the pulley in a lawn mower or a snowblower is to regulate the amount of tension that is placed and exerted on the drive belt during use. The pulley could be damaged to the point that it cannot properly maintain tension on the drive belt, in which case it should be removed and replaced by this genuine OEM replacement part. The replacement process in a pulley will require a wrench. Refer to the equipment manual for full installation instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This pulley is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This is a replacement screw that is a genuine part for select outdoor power equipment units. The shoulder screw is a unique screw that is designed to provide a secure fit while still allowing the unit the joint that it needs to operate properly. Depending on the unit and application, this screw is designed to provide rotation for pulleys, gears, and other moving parts. When they are damaged or wear out, or the threads strip, they will need to be replaced. There are several incidents that could cause damage to a shoulder screw. Regardless, a replacement with this genuine OEM part will be necessary. This OEM shoulder screw is manufactured to exact specifications and can be used with models from Cub Cadet, MTD, and Troy-Bilt. This part will require a socket or nut driver to replace. The shoulder screw is a fairly simple replacement. Allow the unit to cool and wear gloves for hand protection. Since this part has multiple applications, owners should consult their parts diagram for the exact placement of this shoulder screw. The screw is sold individually.

This part is an engine pulley that is used on lawnmowers and lawn tractors. This engine pulley is often referred to as a serpentine belt. This belt aids in powering peripheral devices within the engine compartment, such as power steering.A new engine pulley may be needed if the belt is broken or torn upon a quick visual inspection. The operator may notice that there are squealing sounds coming from the lawnmower or lawn tractor if the pulley is beginning the fail. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This engine pulley is a genuine MTD part. It is sold individually. This particular engine pulley is compatible with lawnmowers and lawn tractors that are manufactured by MTD, Yard-Man, Cub Cadet, Husky, and Yard Machines.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.