Snow Removal Equipment Auger

This is a snowblower auger assembly that serves as a replacement for broken or damaged augers. The auger features rotating blades that collect snow and send it to the snowblower's chute. If the auger is not working properly, the machine will not work effectively and may have trouble throwing snow. It could also be dangerous if the auger were to break when the machine is in use.The auger may need to be replaced for any number of reasons. It could become damaged or broken, or it may have blades that are worn out over many seasons of use. Replacement will help to ensure the snowblower returns to its normal capabilities. To replace the auger, a 1/2-inch socket, 3/8-inch socket, 7/8-inch socket, and a 9/16-inch socket will be needed.This auger fits many models for MTD, Yard-Man, Husky, Yard Machines, and Troy-Bilt snowblowers. The auger is sold individually. This is a genuine OEM replacement part sourced from the manufacturer.

This replacement rubber paddle kit that is used for snowblowers and snow throwers has been sourced from the original manufacturer. The paddles connect to the auger bracket. They are responsible for moving the ice and snow through the chute assembly. If there is a problem with the paddles, the machine will not be capable of moving the snow effectively. The rubber paddles are exposed to the elements when using the machine. They could become damaged by any number of things. They might be broken or cracked during use, or they could wear out and start to break down over time. The screws that hold them in place could corrode or become damaged, as well. When there are issues with the paddles, owners should replace them all at the same time. With this genuine OEM rubber paddle kit, buyers will receive two paddles, as well as the hardware needed to add them to the machine. The paddles are compatible with many models of snowblower from Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, and Yard-Man.

The snowblower auger paddle is designed for use with various single-stage 21 MTD snow throwers and blowers. This part may also be referred to as the spiral crescent. This paddle is attached to the auger, which rotates when the engine is started. As the auger rotates, the paddle will pick up and throw the snow out of the way. This part may get damaged by debris or some type of accident, or it can wear down over time. Replace a broken or worn out snowblower paddle with a genuine OEM replacement paddle. This is an OEM replacement part from MTD that fits various models of snowblowers. It can be used with compatible models from Yard Machines, Yard-Man, Troy-Bilt, Husky, Ryobi, Bolens, and MTD machines. There are over 150 models in total that this paddle can work with. It is made out of durable rubber and comes sold individually. There are two screws at each end required for mounting, which are sold separately.

This is a genuine OEM right-hand auger sourced directly from the manufacturer. It is designed for use on snowblowers and snow throwers. The augers on a snowblower are rotating blades responsible for accumulating snow and pushing it through the auger housing and into the chute to be dispersed. Over time and with repeated use, the auger may stop working correctly. If snow isn't coming out of the chute when used, the auger may be damaged and will not push the snow; when this happens, the auger should be replaced. The auger may be damaged due to hitting rocks and other debris while removing snow. Augers should be inspected regularly to check for broken or bent parts. A screwdriver and socket set is needed to remove and replace the auger. Snowblowers and snow throwers have a right, left, and sometimes middle auger. All augers should be inspected and replaced as needed. Wear gloves when changing the auger and make sure the machine has cooled down if recently used. This right-hand auger is made of metal with serrated edges; it is sold as an individual unit. This right-hand auger is compatible with snow blowers and snow throwers manufactured by Craftsman, Troy-Bilt, MTD, Yard Machines, Yard-Man, Cub Cadet, and Husky.

This part is a replacement auger paddle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective auger paddle in several varying models of snow blowers.The auger paddle rotates inside the snow blower housing and scoops snow up so it can be expelled in the desired direction. Because this part has regular contact with the ground, it can become worn down easily, thus requiring replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger paddle, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger paddle can be used with snow blower models that have been manufactured by Husqvarna and Poulan. Sold individually.

This is a left hand auger assembly that is included with many snowblowers. The auger consists of several rotating blades that collect snow and move it through the augur housing to the chute.If the auger isn't turning and the left hand assembly needs to be replaced, it will require a 3/8 inch socket, a pair of needle-nose pliers, a ½ inch socket, and a grease pump. For the replacement, remove the auger mounts and disassemble the auger shaft transmission to release the auger shaft. Remove the broken or damaged left hand auger assembly after removing any spacers and bushings. Replace the part and reassemble all of the components on the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The left hand auger assembly is created to be used with snowblowers made by Yard-Man, Craftsman, Huskee, Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This genuine MTD auger paddle, also known as an auger blade, is attached to a snowblower to rotate and scrape at the ground in order to pierce through packed, icy, or hard to clear snow.An auger paddle can suffer damage over time as a result of scraping away external materials that can slowly deteriorate the rubber material. Additionally, an auger paddle can be punctured or eroded over general long-term usage which will necessitate a replacement. The most common sign of a damaged auger paddle is the inability of the snowblower to clear away at icy, heavy, or densely packed snow. If the auger paddle is not working properly, it should be replaced with this OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This auger paddle is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Craftsman, Huskee, Yard Man, and Troy-Bilt.