Snow Removal Equipment Skid & Shoe

This part is a replacement skid shoe. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective skid shoe in snow blowers.Skid shoes attach to the snow blower's auger housing in order to enable the equipment to slide easily across the ground. This part is subject to significant wear and tear and thus will require replacement if broken, worn, or detached. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this skid shoe, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This skid shoe can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a replacement skid shoe for Craftsman snowblowers. Ideally, when one shoe becomes so worn that it needs to be replaced, the other shoe should be replaced as well. Replacement is not difficult and should only require about half an hour. First, take out the key and disconnect the plug wire to prevent the machine from starting during repair. Remove the carriage bolts, nuts, and washers that hold the skid shoes in place. Replace the skid shoes. Ensure that the adjustable skids shoes are elevated enough that the snow blades will not collide with the ground during use. This will prolong the life of the shave plate. This OEM part fits a variety of different snowblowers made by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man. Sold individually. The carriage bolts that hold the shoe in place may also need to be replaced and are sold separately.

This genuine MTD slide shoe leaves a sliver of snow between the snowblower and the surface in order to prevent damage to the surface it is being used on. Snowblower slide shoes can also prevent dirt, debris, gravel, and pebbles from flying out of and around the snowblower's radius of work. Slide shoes for snowblowers might suffer damage as a result of age, overuse, exposure to the elements, or direct collision or impact. If this affects the ability of the slide shoes to protect surfaces from damage when the snowblower is in use, the slide shoes should be removed and replaced before using the snowblower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This slide shoe is compatible with the following brands: MTD, Craftsman, and Troy-Bilt. Part sold individually.

These skid shoes are a genuine MTD replacement part specifically for snowblowers. The function of skid shoes is to separate the snow blower from the surface, whether it be concrete, asphalt, or any other material, by letting a sliver of snow remain. This protects driveways, patios, and other surfaces on which one might use a snowblower from machine-inflicted damage. Skid shoes will benefit from immediate replacement if there is noticeable, directly causative damage to the surfaces on which the snowblower is being used. This kind of damage could include cracks, tears, and holes in the surface, no matter the material at hand. If it seems that the snowblower in question has damaged skid shoes, action should be taken immediately to replace it if continuing to use the snowblower on surfaces. Continued use with damaged skid shoes will be at the risk of expense to personal property. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.These skid shoes are is compatible with the brands MTD, Cub Cadet, and Craftsman.

Slide shoes, otherwise known as skid shoes, are attached to a snowblower to help protect the concrete it moves over. The slide shoe also helps to protect the underside of the snowblower. They are composed of metal and are attached to the bottom of the machine. With use, the slide shoes may wear down. They can also become defective from accidents while operating the snow throwing machine. When the slide shoes are not working correctly, there can be irreversible damage done to both the snowblower and the concrete. Replacement slide shoes can easily be attached to the bottom of a snowblower. Be sure to allow the machine to cool down completely. It's recommended to set the snowblower on top of a piece of cardboard. Remove the old shoes and install the new ones, tightening all nuts and washers while the skid shoe is flat on the ground.This is a manufacturer supplied OEM MTD snowblower slide shoe. Each shoe is sold separately. The slide shoe is made of high-quality, durable black steel. It is suggested to replace both shoes simultaneously to ensure an even and consistent path for the MTD snowblower.

This set of two slide shoes is a genuine OEM replacement parts-set for a snowblower. Slide shoes rest on the bottom of the auger housing and help it to glide smoothly against the ground. This lets the auger gather snow without the housing bumping up and down. Every snowblower has two slide shoes: one on each side of the auger housing. They are positioned so that the center openings face outwards. Slide shoes take a lot of abuse while sliding along the ground. Even though they are made of sturdy steel, they can still be banged and dented to the point that they need replacing. If heavily dented, they may no longer glide smoothly and impede the blower's effectiveness. To replace damaged slide shoes, use a socket wrench to unbolt them from the auger housing. Be sure not to lose the mounting bolts, as they will be used for reassembly. This set of slide shoes is designed to be used with Huskee, MTD, Yard Man, and Yard Machines snowblowers. It comes sourced from its original manufacturer and includes two slide shoes. This set does not include any of the hardware required for assembly.

This is a slide shoe that is implemented as a part of snowblowers made by Husqvarna. It is used to leave a small film of snow on the ground as a way to protect the sidewalk and the snowblower. The attachments are made to act as a spacer between a driveway and snowblower while using the tool. The slide shoe connects to the housing of the auger and moves on the ground for easier transport. At times, these slide shoes can become damaged or broken and will need to be replaced.If one of the slide shoes is experiencing issues, it will need a replacement. However, it's recommended that both are replaced at the same time to ensure even wear across the different components. A socket can be used to remove the old shoes from the bottom of the snowblower. The shave plate can also be removed. Replace the parts and reassemble them before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The slide shoe is sold as an individual component. It is designed to be compatible with several different snowblowers manufactured by Husqvarna.

This replacement part is a left-hand skid plate for snowblowers. It is sometimes also called a slide shoe. Along with the scraper on the snowblower, the metal skid plate helps to prevent damage to the machine. It also allows the user to have better control when going over uneven surfaces. Although the skid plate is durable and meant to provide protection, it can still wear out eventually or even break in some circumstances. There is also the possibility of corrosion, as it is made from metal. In those cases, it is important to replace the skid plate. This is a left-handed plate, but it is advised that owners replace both the left and the right skid plates at the same time. This is an OEM replacement part specifically for use with snowblowers. It is important to remember that it is sold individually, and the right-hand skid plate will need to be purchased separately. The part is compatible with many Craftsman, Poulan, Poulan Pro, and Husqvarna machines.

This is a snowblower height adjustment skid plate, also called a shoe. It is attached to the blower so the height of the scoop can be raised to allow adequate clearance. Snowblowers work by skimming cement surfaces like sidewalks, driveways, parking lots, and streets to remove snow. Over time, the shoes will experience wear from constant friction, causing the blades to come closer to the ground. The shoes are designed to leave behind a thin film of snow, which protects the blades from the cement surface below and the cement from being scarred by the blades. The underlying surface eventually wears out the skid plates. At that point, the skid shoes must be raised again to protect the blades and auger from hitting the ground. If the blade on the snowblower has been adjusted, the skid shoe will also need to be adjusted. This is easily accomplished. First, place the blower on a level flat surface. Loosen the exterior bolts on either side of the blower with a ratchet and place a spacer beneath the blade housing so that, if running, the blade would not touch the ground. With the skid plates loosened, adjust it down so it touches the ground, then tighten the bolts that hold them in place. This is an OEM genuine replacement part manufactured by Genuine Midwest Engine and will fit virtually all one phase snowblowers. This OEM part is sold individually.