Parts for Weedeater FL1500 TYPE 7: Starter / Impeller / Housing Parts

This authentic OEM starter pulley is part of the recoil starter on blowers and other outdoor lawn and garden equipment. The starter pulley is located below the starter cover. The recoil spring is connected to the starter pulley in the center. The starter rope is pulled off the pulley by the operator, stretching the recoil spring out and starting the engine. The recoil spring whips back in and pulls the starter rope back onto the pulley. If the pulley is damaged due to age or breaks, it will need to be replaced in order to operate the engine.Remove the engine cover to access the starter pulley. Remove the starter pull rope and carefully remove the recoil spring, holding it in the center and outer edge to keep it coiled. Tie the coil together to prevent having to recoil it later for reinstallation. Remove the screw holding the starter pulley in place and pull the pulley out. Install the new pulley. Reinstall the recoil and spring. Reinstall the pull rope and cover. The starter pulley is a plastic part sold individually. It is sourced directly from the manufacturer and compatible with blowers manufactured by Husqvarna and Craftsman.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This part is a replacement impeller for a leaf blower/vacuum. This impeller is a fan located within the blower. Its main function is to provide the necessary air pressure to blow away leaves. It does this as it spins quickly inside the blower. On the impeller, there are several blades that direct the airflow. Occasionally these blades break. If the blower can also be used as a vacuum, the blades can also be damaged by debris. Replacement of the impeller is relatively simple. Use a screwdriver to remove the blower tube. Then, remove the impeller housing by removing all screws holding it closed. Use a socket wrench to remove the impeller after preventing the crankshaft from rotating. Install the new impeller, remove the rope from the cylinder, and replace the impeller cover. Making sure the impeller is clean and free of damage is vital to a properly working leaf blower/vacuum. This process may vary by machine.This genuine OEM replacement leaf blower impeller is sold individually. It will be sent directly from the manufacturer. This specific impeller can be used with select models of Craftsman leaf blowers.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This is a genuine fuel cap with retainer that is designed as a replacement for select outdoor lawn and garden equipment engines. The fuel cap is responsible for sealing the fuel tank, providing an airtight fit and securing the fluid inside the tank to prevent fuel spills during use. The plastic retainer holds the cap in place when it is open. Both parts could become damaged over time and the retainer could detach entirely. If this occurs, it is best to replace the entire unit.This OEM fuel cap with retainer is manufactured by MTD and designed for use in machines from the brand, as well as those from Yard Man, Husky, Bolens, and Yard Machines. It screws on and requires no tools for installation. The retainer simply fits into the fuel tank to secure the cap when it is open. This cap is sold as an individual part and does not include any additional hardware or a new fuel tank. If the fuel tank itself is damaged and needs replaced, that will require an additional purchase. This fuel cap with retainer will ensure that fuel stays secured and that the unit can run properly at all times.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a 25-inch long fuel line for use with various outdoor power tools and equipment that include small engines. Known as a fuel hose, fuel tube, or pick-up tube, the fuel line delivers fuel from the tank to the carburetor. It is made of flexible translucent plastic to prevent splitting and kinking. Over time, the fuel line can become brittle, cracked, or clogged. When a crack or clog develops, fuel can leak out and make it difficult to start the engine. A leak can cause damage to the motor and the equipment, create performance issues, and even become a safety hazard because of the flammability of the fuel. Replacing a worn-out or cracked fuel line is easy and takes 30 to 60 minutes to complete. Disconnect the old fuel line from the carburetor and the fuel grommet, then replace it with the new line. This replacement part works with different outdoor power tools like the chainsaw, edger, hedge trimmer, leaf blower/vacuum, pole pruner, and pole saw. It is compatible with popular brands like Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is an OEM replacement part sourced directly from the manufacturer and is sold individually.

This part is a replacement fuel line grommet. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective fuel like grommet in leaf blowers.The fuel line grommet works by creating an airtight seal at the point where gas enters and exits the tank. Signs that the fuel line grommet needs replaced include leaking fuel or visual signs of wear and tear. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this fuel line grommet, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This fuel line grommet can be used with blower models that have been manufactured by Husqvarna and Poulan. Sold individually.

This part is a fuel tank assembly that is used on leaf blowers. This assembly includes the fuel tank, fuel lines, fuel filter, and tank cap. The fuel tank is the component that holds the fuel for the engine while the fuel lines circulate the fuel throughout the engine.A new fuel tank assembly may be needed if the original is cracked, broken, or damaged in any way. Over time, the fuel tank may become damaged due to the constant vibrations that it experiences. If this is the case, it will need to be replaced to ensure the operator's safety. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part. It is sold individually. This particular fuel tank assembly is compatible with leaf blowers that are manufactured by Husqvarna, Poulan, and Craftsman.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.