Parts for Briggs & Stratton 28U7707-1175-E1: Starter Motor / Flywheel Parts

This is a rotating screen that protects the lawnmower engine from debris and dirt that could damage the engine. It is an authentic OEM replacement part sourced directly from the manufacturer for use on a variety of lawnmowers. If the screen becomes damaged or broken, dirt and debris could damage the engine or other critical parts. Without the screen, small animals and insects, like little birds and bees, could get inside the engine cavity and make nests. This could be detrimental to the engine and to the animal. During the inspection, if the screen is found to be damaged, it should be removed and replaced. A Torx driver is needed to remove the screen. Wear work gloves and make sure the spark plug has been removed from the lawnmower. Remove the Torx screws and set them aside for use on the new rotating screen. After removing the screws, the blower housing has to be removed in order to remove the screen. After the screen is removed, clean the engine cavity with a blower to remove any dirt or debris. Install the new cover, then reinstall the blower housing and spark plug.This rotating screen is made of durable black plastic and is sold as an individual part. It is designed for use on lawnmowers manufactured by Toro, Briggs & Stratton, MTD, and Craftsman.

The Lever Knob Assembly is an OEM replacement part for MTD outdoor power equipment. The Lever Knob Assembly is responsible for adjusting the height of the mower blade on the front wheel of the mower.

Over time, the plastic or metal components can degrade due to exposure to the elements, frequent use, or accidental impacts. This can lead to the knob becoming difficult to turn, slipping out of place, or breaking entirely.

Symptoms of a bad lever knob assembly include:

• Difficulty in adjusting or controlling the lever
• The knob becoming loose or wobbly
• Visible damage such as cracks or breaks
• The lever not staying in the desired position

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring versatility and reliability for your outdoor power equipment.

This replacement part is an idle speed kit. This is a genuine replacement part made by Midwest Engine. This part is responsible for preventing the engine of many types of machines from stalling during idle time. A new idle speed kit might be needed if the engine stalls out when it is not in motion. This can be due to a faulty idle speed kit and should be replaced. It is important that before attempting to replace this part, the engine is completely off. This can affect the installation and cause damage to the engine. Be sure to wear work gloves when working near the engine of any machine. This part is a genuine OEM replacement part for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Midwest Engine. A nut is a small, metal fastener that is usually connected to a threaded hole. Nuts are typically used along with a mating bolt so that it is able to fasten multiple parts together. A new nut might be needed if the user notices that the current ones are missing or damaged in any way. Though it is small, the nut is an important part of many types of machinery and can cause different parts to stop working or to not work as efficiently if the nuts are not in proper working condition. Be sure the machine is completely powered off before attempting to replace any parts. This small nut is sold individually, and it is intended for use in appliances made by Midwest Engine. This nut is an OEM replacement part.

This replacement tube is a direct-fit connector used to route water or other fluids within the appliance, restoring proper flow and sealing to help prevent leaks and interruptions in operation. What it does:

• Routes water or fluid between components to maintain proper system flow
• Provides a sealed connection to help prevent drips and leaks
• Replaces cracked, split, or clogged tubing that can cause poor performance
• Helps stop intermittent water flow interruptions or unexpected leaks

• One replacement tube/connector as shown

• Install only when the appliance is powered off and water supply is shut off
• Confirm orientation and seating to avoid pinches or kinks that can restrict flow
• Use compatible clamps or fittings provided by the appliance manufacturer

The Door Switch Lever is an OEM part for Whirlpool dryers. It plays a vital role in ensuring the dryer only operates when the door is securely closed by engaging with the door switch to signal the door's status.

Causes of a bad door switch lever can include normal wear and tear from repeated use, physical damage from accidental impact, or deformation from heat and humidity inside the dryer. A faulty lever can prevent the dryer from starting or stopping correctly.

Symptoms of a bad door switch lever include:

• Dryer not starting
• Dryer stopping mid-cycle
• Door not latching properly
• The dryer continuing to run with the door open

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.